The “This is not partclone image” error, so far as i know, only shows up on downloads, not uploads. are you sure you pressed the right button?
You said you deleted the OEM partition. Is there a blank space were it was, or did you expand another partition into that space?

Thanks WB - I’ll snapshot them both, upgrade this week and report back.

Why with the misspelling of my last name?

Why not just call me Tom?

I don’t know if my assumptions are correct so that is something you or somebody who configured the system for you would’ve done.

[quote=“ch3i, post: 40609, member: 2513”]Hi,

How you solve this problem ? 😉

Regards,
Ch3i[/quote]

My wife would tell you that one is still a work in progress.

Oups. Sorry I lost a lot of time to debug before seeing that the image was not well set. I set “multi partitions multi disks” instead of “multi partitions single disk”.

Sorry to disturb you.

This thread can be closed.

Zaza.

Is it possible to roll my own using the kernel that is working for me now?

[quote=“Ricardo Sanches, post: 40277, member: 25923”]Ok so I asked to change the bootfile to undionly.kpxe and it and passes that step and it goes to [FONT=arial][COLOR=#545454][SIZE=3]“iPXE [/SIZE][/COLOR][/FONT][FONT=arial][COLOR=#545454][B][SIZE=3]initializing devices” and the Pc just reboots without showing any menu. Now what am I doing wrong???[/SIZE][/B][/COLOR][/FONT][/quote]

I solved my PXE-T01 issues by using DNSMASQ

[url]http://fogproject.org/wiki/index.php/Using_FOG_with_an_unmodifiable_DHCP_server/_Using_FOG_with_no_DHCP_server#DNSMASQ_settings_for_iPXE[/url]

Thank you for the info Junkhacker. I was able to recover the storage. Somewhere along the lines the configuration got lost. I reconfigured the system manually and I was able to recovered the storage.

Thank you Tom, you’re really fast !

I understand… Google “translation” doesn’t translate effectively well the English in French.
But most of the open-source softwares are in English so don’t be in a hury, we can bear with it !

I thank you for your answer and for your work. Competitors will be misty by FOG.

is this with all 780’s or 1 or a select few?
i’ve had a few issues with 780’s and 380’s where they performed slower then they should while booted into windows, and the I/O chip on the motherboard (the one that doesn’t have a heatsink) gets so hot you can’t keep a finger on it. just the other day i had one of these that i was having trouble getting to work with fog, and after being really persistent with it, it eventually failed to boot at all any more. as in, will not go past the dell splash screen, freezes 😞

ok thx, its just a report, it doesent behind me in any way.

So, I found a very odd but simple solution. Apparently hitting the Enter key on the keyboard advanced it to the next screen, and started uploading. Odd, but it worked.

I have the same issue. I am using an Lenovo Yoga S1 (Yoga 2) with the Lenovo USB to Ethernet Dongle which is using a realtek driver (I think).

This is the furthest I have been able to get. Any help to get over the edge would be great.

Thanks

Pete

Found a solution!

Long story short I took the laptop and installed Ubuntu. Then I installed Win 7 Enterprise, created a Fog image with this PC, and then used this to image the pc. Went to bitlocker it and it worked.

So what does this mean? Apparently I was not able to take a Win 7 Pro laptop, out of the box, install Win 7 Enterprise, and bitlocker it. Windows, for whatever reason, does not like an OS to OS change. I must not be getting a clean install of Win 7 Enterprise. And I did remember to format the partition(s).

Anyway, it took an unconventional approach to fix this problem.

Found it /etc/dhcp/dhcpd.conf

Thanks Tom!!

[quote=“TaTa, post: 40386, member: 24583”]Have you tried to change fog menu exiting style?

Go to Web GUI —> FOG Configuration ----> iPXE Boot Menu —> [FONT=Ubuntu][COLOR=#000000]Exit to Hard Drive Type[/COLOR][/FONT][/quote]

I set the Exit to Hard Drive Type value to GRUB style and this seems to have resolved the problem.

Interestingly, I checked our physical server settings and it had the same setting that was causing problems with the Virtual Server.

Either way, its working great now, thanks for the help.

For now I will do some housekeeping. Some of the images can be deleted and some of them can be stored offline.

Thanks!

[quote=“Lee Rowlett, post: 40352, member: 28”]put it this way, we have 2500 Devices, 23 different models (yes 23!! don’t ask, serious just don’t ask!) 18 sites “large” sites across the stretch of the country (UK) and we can rebuild a machine (with all the software, bells, whistles you name it + more) in under 15 minutes, regardless of what site and it only takes a minute of an engineers time to do (less if device is registered)
just kick it off and check webgui in 15 mins or so.
[/quote]

23 doesn’t sound bad at all to me. we have 33 models in the 800 or so machines currently in fog

Hi Tom,

As it turns out, the problem was a self inflicted wound. Our Apple guy also has ain image server running. He turned it on the other day. I noticed in the logs that the system would ask for an address first from the FOG server and then from the Apple image server immediately after that. It would then invariably die while trying to connect to the Apple server. I unplugged then network card on the apple box and stuff started working again.

Thanks for the help!

John