@boeleke It’ll cause problems whenever you want to change anything with an image.

@Wayne-Workman You were right. I followed the link and followed its instructions and it is now pushing the image. Really appreciate the assistance.

GGQ

@herrpommesfrite For most, 60 is fine. Especially with the improvements that FOG Client 0.10.x brought.

If you have less than 1,000 computers, 60 is probably fine. In excess of that I’d probably recommend 3 or 5 minutes. Esp. when you get to around 15,000.

@phil_guy It’s not a linux or fog question. When the computer turns on, you usually hit F2 to enter the BIOS. On some HPs, it’s the Esc key, for Lenovos it’s usually the Enter key. Then just compare each item line for line on both the golden machine and target machine.

@GoodGuyQ My guess is you’re entering the wrong user/password. You can add a new user in the webgui to test that out.

Here is my quick image item for reference

set username foglogin set password foglogin params param mac0 ${net0/mac} param arch ${arch} param username ${username} param password ${password} param qihost 1 isset ${net1/mac} && param mac1 ${net1/mac} || goto bootme isset ${net2/mac} && param mac2 ${net2/mac} || goto bootme

With foglogin being a valid username and password

@Sam-Wennerlund for what it’s worth, i’m running the latest trunk on Ubuntu 12.04.5 LTS. it works fine.

@Junkhacker This looks promising… and it’s open source.

Regshot is an open-source (LGPL) registry compare utility that allows you to quickly take a snapshot of your registry and then compare it with a second one - done after doing system changes or installing a new software product.
https://sourceforge.net/projects/regshot/

This appears to be a networking related question vs a question about the application.

Previous poster is correct. Basically you would want to enable multicast on your layer 2 devices and perhaps on your layer 3. In general, you want to control where the multicast goes, so enabling is not the end of the story.

Removing the hook sorted it nicely. Thanks for that.

@boeleke Those are the fog server’s CA and private certificate for your specific server. They must remain in place for anything concerning the fog client to work. You should not bother them to create a snapin.

thanks guys for replay i was really busy to follow up the post
i will provide a photo soon as i restart the server next time

You may also find this helpful: https://wiki.fogproject.org/wiki/index.php?title=CentOS_7

@Cammy-Webster It’s fine. Part of being a moderator is being able to link to obscure threads 🙂

@JGeear There isn’t a call to shutdown the interface. The SIGTERM, Shutting down is the message that is saying it is shutting down.

Trinity rescue CD 3.4 : NOT WORKING : kernel panic

kernel http://IP-FOG/fog/service/ipxe/trinity3.4/kernel.trk || read void initrd http://IP-FOG/fog/service/ipxe/trinity3.4/initrd.trk || read void imgargs initrd.trk ramdisk_size=65536 root=/dev/nfs vga=788 trknfs=IP-FOG:/home/tftpboot/trinity3.4/ ip=dhcp splash=verbose pci=conf1 trkmenu timeout 100 || read void boot || read void

UDF-fs : No partition found(1)
No filesystem could mount root , tried ext3 ext2 ext4 cramfs squashfs vfat …
kernel panic - not syncing : VFS: Unable to mount root fs on unknown-block(8,1)

@Deimos Update to trunk and adding choices is MUCH simpler, as well as “cancelling” other tasks.

https://wiki.fogproject.org/wiki/index.php?title=Upgrade_to_trunk

The new client will not work with FOG 1.2.

If you want to use the new client, I’d highly recommend you upgrade to trunk.

https://wiki.fogproject.org/wiki/index.php?title=Upgrade_to_trunk

While I do understand hesitation of upgrading to an “development” version, I can assure you this version works with the new client as the new client and FOG where built together with a lot of collaboration between @jbob and myself.

@Quazz Kudos to you for knowing what the issue was.

@Tom-Elliott
Oh ok.
I updated the kernel to “Official Published Kernels
Kernel - 4.1.2 TomElliott” and it works!
i just don’t see the “TomElliottUSB” on the kernel i selected before…!

SOLVED 🙂 !