As for default behavior in SVN services are enabled on a pxe registered machine if you register the machine via the web interface then the default is off.

Kewl but you can just disable the AHCI in the BIOS. So really you could go either way.

After editing on the part of GUI ( fog.multijoin ) and remove the lines you say to start the multijoin returnd to boot menu
[LEFT]It seems that no session[/LEFT]
[LEFT]Apologize for if I do not fully understand my English is not very good[/LEFT]

[SIZE=4][FONT=arial][COLOR=#222222]couldn’t resist[/COLOR] to install r3072, it seems my issues are solved…:)[/FONT][/SIZE]
[SIZE=4][FONT=arial]what a great support :)[/FONT][/SIZE]
[SIZE=4][FONT=arial]I am very very grateful…:)[/FONT][/SIZE]

That worked. Thank you Tom.

Yeah the host existed already and i’m using the tweaked init file.

What are the error messages? An exact error message, or even better a copy of the install log ( Should be located in [SIZE=12px][FONT=Consolas][COLOR=#333333]/var/log/foginstall.log[/COLOR][/FONT][/SIZE] ), would help us out tremendously.

absolutely correct from what I can gather.

Thanks, I just tried that, but I noticed the same problem in another thread where someone is having the same problem, and where you told them to try the same thing. So I’m going to post the results over there
[url]http://fogproject.org/forum/threads/problem-with-permission-denied-after-fog-server-restart.12503/[/url]

Gotta help keep the forum organized and what not right. I’ll post here again if I here back about whether or not option 43 was touched by someone else.

Thanks again for all the help.

And now it all works again? Maybe the mysql database on the old system was corrupt…

[quote=“hesslr, post: 42845, member: 17210”]I reinstalled the fog service on our master image and all is well using 1.2.0. Thanks for the help![/quote]

Awesome! That was such a far-fetched idea, can’t believe it worked!

Also, TFTP and FTP are not the same things. They are each their own thing, as I understand. Two separate services.

Well found out what was killing VMPlayer from Network booting it was Symantec Network threat protection causing the issue when disabled it works just the way it should. Now I just need to find where to add an exception for vmplayer so I don’t need to keep disabling the network protection.

The legacy service was removed in recent versions. Use this link instead:
[url]https://github.com/FOGProject/fogproject/blob/b17cbe8fa277ef32f4ec04d80c1526ab9de9586c/FOGService/src/FOG_HostNameChanger/MOD_HostNameChanger.cs[/url]

Full scan seemed to fail on the few I tried it on so I switched to using quick scan so that I could at least add tasks. My priority has been using the PXE boot virus software after an “incident” earlier in the month.

If I import the list now will it match on MAC addresses and not create duplicates?

Finally got it to work!!!

I want to thanks all of those for your being patient with me and giving feed backs through out this particular cluster. After getting tired dealing with the “what if” finally it was time to restore the drive to factory state by destroying all sectors, tracks and cylinders. Then installing Windows 8 and letting Windows 8 to create sectors, tracks and cylinders. It worked!!!

I’m pretty sure the wiki hasn’t been updated for 1.2 you might look here [url]http://fogproject.org/forum/threads/integrating-hirens-boot-15-2-into-fog-1-2-0.12155/[/url]

AFAIK you don’t need anything special. Just option 66 and 67. No dot at the end of the IP! Are you familiar with wireshark/tcpdump. If not maybe it’s time to dive into that part of network debugging. Capture the DHCP traffic and compare working against non-working setup. Probably best to use a hub to be able to capture that traffic. On your FOG server you can just use tcpdump straight away:
[CODE]sudo tcpdump -i eth0 -w /tmp/packet_capture.pcap[/CODE]
You can then transfer this file to your PC and open it up using wireshark… Try display filters to find DHCP (filter: bootp) and TFTP (filter: tftp) traffic.

Yes, there’s a syntactically incorrect sql stament.

The statement should be:
[code]delete from tasks where taskTypeID=‘8’;[/code]

solved, I suppose 🙂