Allright, copying from one computer to another didn’t work, however I tried another approach… we have a disk duplicator from startech, so I plugged in the 80GB into the source and 2TB into destination and let it copy. It made an identical copy successfully, however the partition sizes where the same. So I used GParted to grow the sda1 to ~2TB. (with 3GB for swap) everything booted and is working fine.

I have now jumped from 98% usage down to 8% usage 🙂

Now the only issue this brings up is how to backup fog images if copying them somewhere and reviving them doesn’t work…

Thinking about it more, this isn’t an issue with FOG, at this point of the imaging process, this is an error based on Partimage (if it is actually an error). I’m sure they don’t want you to stop in the middle of an upload/download so you don’t have a corrupt image. FOG may be getting switched to Partclone down the road anyways. So unfortunately, this I think, will be just how it’s going to be.

Hi,

The FOG server has been reinstalled (Ubuntu 12.04 LTS Server 64 bits) without services (LAMP, OpenSSH, etc.), and after that I have installed FOG. The problem is solved.
Now I can’t upload snapins, but I’m going to start a new thread.

Thank you for your help.

Nice, looks like it’s pushing the image back. I got a little worried there for a minute. Right before it started, it said something about an invalid command, but it went away quick and started to work.

I’m doing this and not getting a domain join. Any suggestions?
[IMG]http://i.imgur.com/qlmyESI.jpg[/IMG][IMG]http://i.imgur.com/FhgKBtM.jpg[/IMG]
In the pic above that’s:
DOMAIN.local &
USERNAME

yes it was ther /images/var

i think a win xp image was right around 25 gig

If I remember rightly, and I guess google/bing here is a good tool to use, I think udp port 7 needs opening between networks?

I dont think that the issue will be your network card being shared with other VMs as I have this setup and also a standalone fog storage server on a real platform that does nothing but fog. The storage node behaves the same way when in use. I wonder if its an ubuntu thing? Anyone with fog in use on another distro that would care to comment? Perhaps some of our redhat based friends? CentOS, Fedora etc?

[QUOTE]The problem is the version of PHP that is installed is much newer than the FOG code.

[url]http://fogproject.org/forum/threads/cannot-create-tasks-task-manager-blank.3823/[/url]

summary: a small amount of code used by FOG was deprecated when it was released and is now unsupported. In the file you need to replace all function calls that pass &$tmp with just $tmp. [/QUOTE]

That’s news to me 🙂 Good to know.

For the TFTP problem try [B]sudo service tftpd-hpa restart[/B] and see if that solves your problem

I tried a Toshiba R950 which boots and images. A Toshiba R840 which is the laptop I was trying to take an image from will boot to the PXE menu and let you choose an option but will then just give a black screen. I did try the kitchensink kernel but same issue. I gave up in the end and didn’t take the image but it would be useful if I could get it to work so I don’t have to manually rebuild in the future.

Thank you! That fixed it!

Check your apache logs for clues. It is most likely a php issue if its been working until recently.

Kernel-2.6.37.core works for the Acer Aspire 722. You can find it in the Fog kernel downloads.
[url]http://sourceforge.net/projects/freeghost/files/Kernels/Kernel-2.6.35.7/[/url]

Solution found!!!

[url]http://fogproject.org/forum/threads/cannot-create-tasks-task-manager-blank.3823/#post-9593[/url]

You can install a kernel manually by downloading it from the sourceforge project page, under the Files header, Kernel section. Just pick one and download it.

[url]https://sourceforge.net/projects/freeghost/files/Kernels/[/url]

Once you download it, backup the existing kernel and move the one you downloaded.
[CODE]
sudo cp /tftpboot/fog/kernel/bzImage /tftpboot/fog/kernel/bzImage.backup
sudo mv [downloaded kernel] /tftpboot/fog/kernel/bzImage
[/CODE]