Issue was simple did not realize that under fog settings tftp server settings. Password had defaulted to series of letters and numbers.
Changed to my password and issue has been fixed. I will try reimaging the Quad cores now that i have downloaded this newer kernel to see if this helps.

Thanks much

Did you assign the image with a storage node or delete the node that that image was attached to originally?

Because you’re running SVN version 1801.

Based on what I’m reading on this, it sounds like the database didn’t get updated properly, maybe due to password not correct?

If you can stand to do so, try re-updating the database.

is this an OEM install, or have you wiped the disk clean and done a fresh install?

I tired upgrading to the new version of the fog. I am now at version 1.1.0. I am still having the same issue. Does any one have any suggestions?

[quote=“Koen, post: 29688, member: 4127”]Hi Tom

Sorry, I overlooked completely that option 67 had to get a different value, my fault.
May be the install script can emphasize that this has to be changed in case of an update?

All the best and thanks,

Koen[/quote]

It um… it does.

[code]
echo " DHCP will NOT be setup but you must setup your";
echo " current DHCP server to use FOG for PXE services.“;
echo ;
echo " On a Linux DHCP server you must set:”;
echo " next-server";
echo ;
echo " On a Windows DHCP server you must set:“;
echo " option 066 & 067”;
echo;
echo " Option 066 is the IP of the FOG Server: (e.g. ${ipaddres}“;
echo " Option 067 is the undionly.kpxe file: (e.g. undionly.kpxe)”;
[/code]

This is a blatant rip from the installfog.sh script that you run to install FOG, for some reason many members fail to read the instructions presented to them.

FIXED!

I truncated the entire tasks table, removed the bad member reference in groupMembers, and anything else related to this 'BAD HOST"…The Invalid OS ID is due to a small bug in r1799.

Issue resolved.

THANKS TOM!!!

before you do that just try change the value of FOG_UPLOADRESIZEPCT to 15
It is in the general settings.

I seem to remember we had the same problem, a couple of years ago.

(using latest undionly.kkpxe - with 2 ‘k’ as my undionly.kpxe file since the original does not work in this system - keeps restarting machine)

There’s a tutorial in [url]http://fogproject.org/forum/threads/centos-6-5-x86_64-installation-process-failure-with-fogftp.10705/[/url]
(it’s for CentOS 6.5)

Sometimes, OEM images have special partitions where they store recovery images and OEM tools. Maybe Fog was seeing that partition as RAW…

Just to update this thread - I don’t know if this was an issue just for a short while after reboot but it seems to have cleared up (although I haven’t been making any changes to the DB). I also added “service mysql restart” to the /etc/rc.local file.

FOG Version: 1.1.0
OS Version: Ubuntu 13.10 (GNU/Linux 3.11.0-22-generic i686)
Client Computer: HP Elitebook 8460P
Client OS: Win 7 Pro
Just finished perusing the Apache error logs and didn’t find anything but shutdown/startup messages…
Went through the wiki and didn’t find anything useful there. I’ll try the debug function you mentioned and see what that nets me.
If anything else comes to mind that I need to check, let me know.
Thanks!

Output from install log:
Version: 1.1.0 Installer/Updater

Found FOG Settings from previous install at: /opt/fog/.fogsettings Performing upgrade using these settings…

Starting Debian / Ubuntu / Kubuntu / Edubuntu Installtion.

#####################################################################

FOG now has everything it needs to setup your server, but please
understand that this script will overwrite any setting you may
have setup for services like DHCP, apache, pxe, tftp, and NFS.

It is not recommended that you install this on a production system
as this script modifies many of your system settings.

This script should be run by the root user on Redhat or with sudo on Ubuntu.

** Notice ** Redhat users will need to disable SELinux and iptables in
order to use FOG
Please see our wiki for more information at [url]http://www.fogproject.org/wiki[/url]

Here are the settings FOG will use:
Base Linux: Debian
Detected Linux Distribution: Ubuntu
Installation Type: Normal Server
Server IP Address: 10.40.40.105
DHCP router Address:
DHCP DNS Address:
Interface: eth0
Using FOG DHCP: 0
Internationalization: 0
Donate: 0

DHCP will NOT be setup but you must setup your current DHCP server to use FOG for PXE services. On a Linux DHCP server you must set: next-server On a Windows DHCP server you must set: option 066 & 067 Option 066 is the IP of the FOG Server: (e.g. 10.40.40.105 Option 067 is the undionly.kpxe file: (e.g. undionly.kpxe)

Are you sure you wish to continue (Y/N) y

Installation Started…

Installing required packages, if this fails
make sure you have an active internet connection.

Preparing apt-get

Installing package: apache2

Installing package: php5

Installing package: php5-json

Installing package: php5-gd

Installing package: php5-cli

Installing package: php5-mysql

Installing package: php5-curl

Installing package: mysql-server

We are about to install MySQL Server on
this server, if MySQL isn’t installed already
you will be prompted for a root password.

Press enter to acknowledge this message.

Reading package lists…
Building dependency tree…
Reading state information…
mysql-server is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 8 not upgraded.

Installing package: mysql-client Installing package: tftpd-hpa Installing package: tftp-hpa Installing package: nfs-kernel-server Installing package: vsftpd Installing package: net-tools Installing package: wget Installing package: xinetd Installing package: sysv-rc-conf Installing package: tar Installing package: gzip Installing package: build-essential Installing package: cpp Installing package: gcc Installing package: g++ Installing package: m4 Installing package: htmldoc Installing package: lftp Installing package: openssh-server Installing package: php-gettext Installing package: clamav-freshclam

Confirming package installation.

Checking package: apache2…OK Checking package: php5…OK Checking package: php5-json…OK Checking package: php5-gd…OK Checking package: php5-cli…OK Checking package: php5-mysql…OK Checking package: php5-curl…OK Checking package: mysql-server…OK Checking package: mysql-client…OK Checking package: tftpd-hpa…OK Checking package: tftp-hpa…OK Checking package: nfs-kernel-server…OK Checking package: vsftpd…OK Checking package: net-tools…OK Checking package: wget…OK Checking package: xinetd…OK Checking package: sysv-rc-conf…OK Checking package: tar…OK Checking package: gzip…OK Checking package: build-essential…OK Checking package: cpp…OK Checking package: gcc…OK Checking package: g++…OK Checking package: m4…OK Checking package: htmldoc…OK Checking package: lftp…OK Checking package: openssh-server…OK Checking package: php-gettext…OK Checking package: clamav-freshclam…OK

Configuring services.

Setting up fog user…Exists

Setting up and starting MySql…OK

Backing up user reports…OK

Did you leave the mysql password blank during install? (Y/n) y

Setting up and starting Apache Web Server…OK
You still need to install/update your database schema.
This can be done by opening a web browser and going to:

[url]http://10.40.40.105/fog/management[/url]

Configuring Fresh Clam…OK

Setting up storage…OK

Setting up and starting NFS Server…OK

Setting up and starting DHCP Server…Skipped

Setting up and starting TFTP and PXE Servers…OK

Setting up and starting VSFTP Server…OK

Setting up sudo settings…OK

Setting up FOG Snapins…OK

Setting up and building UDPCast…OK

Installing init scripts…OK

Setting up FOG Services…OK

Starting FOG Multicast Management Server…OK

Starting FOG Image Replicator Server…OK

Starting FOG Task Scheduler Server…OK

Setting up FOG Utils…OK

Would you like to notify the FOG group about this installation?
* This information is only used to help the FOG group determine
if FOG is being used. This information helps to let us know
if we should keep improving this product.

Send notification? (Y/N)n
NOT sending notification.

Setup complete!

You can now login to the FOG Management Portal using
the information listed below. The login information
is only if this is the first install.

This can be done by opening a web browser and going to:

[url]http://10.40.40.105/fog/management[/url] Default User: Username: Password:

Script done on Thu 05 Jun 2014 04:23:54 PM CDT

unless you upload a lot of times, your probably better off having compression

We have upgraded to Fog 1.1 with very little trouble. I was using the PXE boot to load a few disk-less systems. Since he change in Fog PXE boot as changed a bit it seems to be going to the httpd for the boot image. How can i add a 01-xx-xx-xx-xx-xx-xx file to get my network boot systems back up and running. I’m not familiar with working of the new setup. I am hoping its something easy. or if you can point me in the right direction.

[B]I just copied the old PXE files to the /tftpboot/ and made sure not to write over any of the new files.[/B]
[B]I should have played with it more before i posted.[/B]

Thanks again for all you guys have done with the Fog project.

I figured it out… turns out, having the addresses of your DNS servers typed in [I]correctly[/I] is important…\

If the issue is specifically on Virtualbox, try ipxe.kpxe or ipxe.pxe.

What kind of switches do you have? Do you have VoIP? Do you have other tftp servers?

On the switches within your environment, do you have Spanning Tree Protocol turned off as recommended? Do you have portfast enabled for cisco switches?