well, what i needed was the french keyboard for the registration/capture/deploy.

I followed Quazz advice (General settings / keymap : azerty) and all is good now !

thanks 🙂

@p4cm4n also, tried cmd and batch from sfx archives, specifically 7zip sfx maker which threw an error trying to run on my own machine and winrar sfx maker. Rar is crappier compression but oh well. One of those worked can’t remember which…but things like wifi configs using it didnt.

@wayne-workman said in udhcpc **deleting routers**:

DHCP failed… after press enter…

I am fairly sure this is not the exact message. @Satheesh Please take a picture of the error on screen and upload here so we see what exactly you see on screen.

@jackiejack Reinstalled my centos 7 and did not tamper with anything. Fresh install of fog. Works perfect.

My adding repos and setting the priorities of them caused the confusion. Just let fog do its thing.

@howtogravity OK very good. The lsblk program tells us everything, and your setup is perfect. As long as when you reboot the lsblk gives you the same values you are good to go.

So if you look at the output of lsblk you can see that /dev/sdb1 (the first partition on the second hard drive) is connected to (mounted on) /images. This means any files written to /images will go to your second hard drive.

The output of the df -h program tells us how much disk usage you currently have/are using. Those numbers look good too.

I have gotten in the habit of downloading the binaries before the install. It’s just too long to wait for them without knowing what’s going on if you let the install script do it.

One other possible solution is Veeam Backup Agent (free). This will do a full system backup with bare metal restore. You can back up to a NAS, Veeam B&R Server ($$), or other network storage device. If you have a system failure, you boot from the linux boot cdrom, connect to your storage device and then restore your system. This is one way to protect your fog server. There may be native (Ubuntu) options like Bacula too.

Try to stop the firewall and see.

systemctl stop firewalld

@sebastian-roth, actually I always do that first thing. I saw that post and realized that barring the similar error message, it had nothing to do with my problem, unfortunately, so I moved on.

@georger Please schedule a debug capture task (like normal but hit the checkbox for debug just before submitting) when you get to the shell please run the following commands:

gdisk -l /dev/sda ... fixparts /dev/sda ...

The later command will ask you to confirm so you go y ENTER w ENTER y ENTER. Possibly it will print out an error and quit straight away. Take a picture of the screen and post here.

@kermit1991 Do you see this issue on all your clients or just when using an USB ethernet adapter? Have you tried using the ethernet adapter together with different clients. Sometimes adapters and client’s BIOS/UEFI firmware just don’t play together well enough. On the other hand some USB ethernet adapters just don’t play nicely altogether. It’s a long process to figure out what exactly the issue is. So start by telling us more about the exact USB adapter you have and make/model of PC/laptop you use.

@rstockham23 Sorry but the important information is not on the picture. Usually there is a message in the blue partclone screen which should give is more hints on what’s wrong. When scheduling the task you can set the checkbox for debug and after the error happens you’ll get to a command shell. There you can check the mentioned log file: cat /var/log/partclone.log

@vince-villarreal this is the purpose of the persistent groups plugin. When a host is added, the new host will get whatever the template host has defined. This, to my knowledge, only happens when a new host is added. If you add a host to the group, then later edit the host itself, it should retain the new changes regardless of the template, until you remove and readd the host to the group.

you can solve this post. rewording this in a new post.

@salginer The partition layout looks pretty straight forward. Is your Windows partition bitlocker encrypted? Run manage-bde -status C: in a admin command shell.

I started doing that which is what led me to the remi yum repo setup and the binary file download. At this point I think I am just going to attempt to hack it up so that it will work offline and then later see if I can add a switch to the installation file for an offline mode that checks for the dependencies.

@tom-elliott Updated the production server and it is now multicasting. As a side note though I tried to start a ‘test’ session of multicast, the same name I had used pre-update, and it did the same thing(started and instant ended). But if I picked a new name that I hadn’t used before, it appeared to start and wait for connections normally.

Philip

Ok all seems fine now, thanks you Quazz 😉
Except than when I execute sysprep, all metro appx are gone after reboot, no more calculator or store…
Seems to be a Windows 10 1803 upgrade problem, one more thing I’m trying to resolve… 😞

@tom-elliott Getting one host to work as expected in the group seems to have fixed all my issues. Now the changes I make are sticking after I leave the page. Thanks for your help.