It may be a problem with the firmware on those cards. I have about 30 rebranded Compal JHL91 laptops and 270 Acer Iconia Tab w500p tablets. These two models of devices do not PXE boot properly by setting DHCP with the server and filename options. They would give me a tftp: file not found.

I installed WireShark (and WinPCap included) on a machine and setup my switch to let me monitor the port the problematic machines were plugged into. I found that when these machines booted to PXE, they would get the IP of the fog server and the name of the bootfile (pxelinux.0) but would fail when making the TFTP read request.

If you have access to the switch config, download a copy of WireShark (free on Linux and Windows) and investigate what’s going on during the PXE boot and TFTP initial transfer.

[B]Tip: [/B]Start your packet capture as the problematic computer boots and stop it right after you get the error. Then use filter: “not arp and not http and not snmp” in WireShark and look for UDP messages related to DHCP. The first should be a DHCPDiscover, then a DHCPRequest, followed by a DHCPAck.

If you look at the lines for DHCP, pay attention to the Bootp section in the data window.

Let’s see exactly where the failure is before we offer solutions.

Thanks, the one one tab I never goto

This happened to me when I tried to use any location other than %systemroot%\system32\sysprep\ as the location of the unattend.xml file and I don’t use the full path when calling sysprep from the comman line. usually my sysprep call looks like
[CODE]C:\Windows>%systemroot%\system32\sysprep\sysprep.exe /generalize /oobe /shutdown /unattend:%systemroot%\system32\sysprep\unattend.xml[/CODE]

You have a few options, listed in order of complexity and setup requirements:
[LIST=1]
[]Disable DHCP on your DLINK ADSL modem and use Fog as your DHCP server. The config is really easy if you just need it to give out adresses to a small network.
[]Disable DHCP on your DLINK ADSL modem and use a spare computer running Ubuntu as a dedicated DHCP server.
[*]Leave DHCP running on your DLINK ADSL modem and configure your Fog server to use LTSP/ProxyDHCP so it answers PXE boot requests with next server and file name options, but doesn’t handle giving out IP addresses.
[/LIST]

If you choose the single disk resizable, you get 1 file under /images/
If you choose the other image types, you get a folder name, and several files created undernearth representing the disks and partitions.

You should compare the /images/ directory structures on both servers, including permissions and ownership of files. Also, make sure the rsync is complete before you try to use the image files.

On 10.04 LTS [B]Server[/B], you should not have to make that change. Create a new thread with the particulars of your issue including Fog version, OS Version, and as much information about the error as you can. We’ll be glad to help you.

while i’m thinking about it, is there a way to find your config during the initial setup of FOG? It sure would be trying to track down all the IP’s used for setting it up if you can just pull up your initial config.

Nevermind after searching the syslinux iso, I found the vesamenu.c32 file under syslinux-4.05\com32\menu for anyone wondering.

thanks i have your email

Hi Terry,

Take a look here : [url]http://www.fogproject.org/wiki/index.php/Modifying_the_Init_Image[/url]

Once you have access to all of the scripts it’s pretty easy to add the linux command (for the life of me I can’t remember what it was as I’m a confirmed Linux noob to my eternal shame !) so that at the end of the process it’ll sit there and wait for a keypress.

HTH
Cheers
Robin

I’m really sorry that I did not get a chance to reply to this earlier, but thank you so much for taking the time to help me out with this! I had been wrapped up in other projects until today, but I will definitely work on this and let you know if I make any progress! Again, thank you! 🙂

[quote=“joshua, post: 3872, member: 146”]Hunter, when you goto the server IP /fog/client in your web browser, you should already have a download for Sysprep.
for me when I goto 192.168.1.63/fog/client I see this:
[ATTACH=full]120[/ATTACH]

However, if you want to add more to it, I guess you could just modify the index.php file to include whatever you wish.
You can find that file here in Ubuntu 10 (and probly the same for all Debain based installs).
/var/www/fog/client/index.php

Hope this helps[/quote]

Thanks for the direction, it works, added a DL for the Win7 unattend file.

localhost

I was struggling setting up the task to upload the image. I realized the problem I was having was due to the fact that I created a new storage group incorrectly instead of using the default. After watching all the videos and following the documentation, I figured out how to create the task. Right now, the upload is pending. I am waiting on our network admin to make the necessary changes to our DHCP server. After that, I think everything will be fine.
One question I still have; What is the purpose of the Fog Client?

autodesk can be silently pushed, see their forums - [url]http://forums.autodesk.com/t5/Installation-Licensing/Silent-install-for-Inventor-2012-viewer/td-p/3078092[/url]

Matlab can also be modified to be silently pushed (modifying the .ini) - [url]http://www.mathworks.com/support/solutions/en/data/1-184HZ/index.html?solution=1-184HZ[/url]

did you FogCrypt your password?

For the default domain name, I use the fully qualified domain name (fqdn), ex: mydomain.com
I leave the OU blank.
For the user name, I use the netbios domain name, which is the same as the first part of the fqdn, but you can use the fqdn also, PLUS my domain name.
For the password, it’s the user’s password FogCrypted.

It works for windows xp and windows 7 pro 32 and 64 bit.

We are running Windows Server 2008 R2 as our domain controllers, if that makes any difference.

Hi Bryce,

thanks for your help and assistance! It’s now working, the problem it would seem was permissions to the chain.c32 file and the pxelinux.0 file, all wokring now!

Cheers!