Cisco 2950 Multicast Issue
I have a stand alone Fog Server with a dedicated 2950 switch using the default vlan. This setup doesn’t touch my production network. When I try and setup a Multicast session all the computers hang on “Please Wait”. I read somewhere that had something do with my multicast switch setup.
I looked at this article - [url]http://fogproject.org/wiki/index.php?title=Cisco_Multi_Cast[/url] - but I can’t find where to configure “ip im sparse-dense-mode”.
I also looked at this article - [url]http://www.cisco.com/en/US/products/hw/switches/ps708/products_tech_note09186a008059a9df.shtml[/url] - and configured per Solution#3 manual mrouter pointing to my Fog server.
In those two config files what are using to identify the mysql host? IP, hostname, or localhost?
login in via web access or ssh/serial cable to configure that setting i believe
also check the two posts below:
After installing FOG I Installed [URL=‘http://webmin.com/’]Webadmin[/URL], I logged into the mysql section created a new user (fogadmin) and password, giving this account full permission. I then edited the MYSQL info in /var/www/fog/commons/config.php + /opt/fog/service/etc/config.php. to match.