Is is possible to change what partition is uploaded from a host? There’s a recovery partition at dev/sda1 and the actual windows install at dev/sda2. When I try and upload an image it’s trying to access dev/sda1 and failing as it’s not NTFS. So can I tell FOG to get dev/sda2 instead somehow?

I just tested putting a image onto a new (blank) virtual machine. It’s a WinXP image. It did not run a check disk after laying down the image. This makes me think it’s a setting in the image that you’re using.

Also, what’s the problem with letting check disk run? We have hundreds of machines that run a check disk every night on reboot and experience no issues from that.

Sorry, Forgot to say. I tried creating that file by copy/pasting from the the wiki. With that file present I can not start / restart the dnsmasq service.

I am trying to setup a Proxy DHCP server to integrate with my existing network. I’ve got a router that’s the DHCP server and I can’t set any options on it for PXE boot requests. I’d prefer to leave it as the DHCP server over my computer as this computer isn’t always on.

Enter Proxy DHCP server. I followed [URL=‘http://www.fogproject.org/wiki/index.php?title=Using_FOG_with_an_unmodifiable_DHCP_server/_Using_FOG_with_no_DHCP_server’]this page on the wiki[/URL] as closely as I could. I’m running Fedora 16. I have fog installed after some edits to the install script. I setup FOG normally with DHCP off. I may have specified a router IP address when doing the setup, but I found and removed that from the FOG configuration pages. I have edited /etc/dnsmasq.conf with the settings mentioned in the wiki article. The same settings were in the example file, and if I create that file the dnsmasq service won’t restart/start.

When I try and PXE boot a physical computer it just times out. When I try and PXE boot a virtual machine that’s network is bridged it get’s an IP address but comes back and says “No Filename” and then says no bootable devices (true).

Network map:
Cable Modem --> Router @ 192.168.1.1. Subnet 255.255.255.240.
My computer/FOG server @ 192.168.1.3
DHCP - 192.168.1.9 - 192.168.1.14

[CODE]/etc/dnsmasq.conf:

Don’t function as a DNS server:

port=0

Log lots of extra information about DHCP transactions.

log-dhcp

Dnsmasq can also function as a TFTP server. You may uninstall

tftpd-hpa if you like, and uncomment the next line:

#enable-tftp

Set the root directory for files available via FTP.

tftp-root=/tftpboot

The boot filename.

dhcp-boot=pxelinux.0

rootpath option, for NFS

dhcp-option=17,/images

kill multicast

dhcp-option=vendor:PXEClient,6,2b

Disable re-use of the DHCP servername and filename fields as extra

option space. That’s to avoid confusing some old or broken DHCP clients.

dhcp-no-override

PXE menu. The first part is the text displayed to the user. The second is the timeout, in seconds.

pxe-prompt=“Press F8 for boot menu”, 3

The known types are x86PC, PC98, IA64_EFI, Alpha, Arc_x86,

Intel_Lean_Client, IA32_EFI, BC_EFI, Xscale_EFI and X86-64_EFI

This option is first and will be the default if there is no input from the user.

pxe-service=X86PC, “Boot from network”, pxelinux

This range(s) is for the public interface, where dnsmasq functions

as a proxy DHCP server providing boot information but no IP leases.

Any ip in the subnet will do, so you may just put your server NIC ip here.

Since dnsmasq is not providing true DHCP services, you do not want it

handing out IP addresses. Just put your servers IP address for the interface

that is connected to the network on which the FOG clients exist.

If this setting is incorrect, the dnsmasq may not start, rendering

your proxyDHCP ineffective.

dhcp-range=192.168.1.3,proxy

If you don’t want dnsmasq to poll /etc/resolv.conf or other resolv

files for changes and re-read them then uncomment this.

no-poll

Include a another lot of configuration options.

#conf-file=/etc/dnsmasq.more.conf
conf-dir=/etc/dnsmasq.d

All other lines are commented out and have been removed from this post

dhcpd.conf file:

DHCP Server Configuration file.

see /usr/share/doc/dhcp*/dhcpd.conf.sample

This file was created by FOG

use-host-decl-names on;
ddns-update-style interim;
ignore client-updates;
next-server 192.168.1.3;

subnet 192.168.1.0 netmask 255.255.255.240 {
option subnet-mask 255.255.255.240;
range dynamic-bootp 192.168.1.9 192.168.1.14;
default-lease-time 21600;
max-lease-time 43200;
filename “pxelinux.0”;
}
[/CODE]

What can I do to get this working? Thanks!

I’d like to get access to the wiki so I can create a page for installing on Fedora 16. The wiki says to post here, so here I am!

I think I’ve just successfully installed FOG on my Fedora 16 machine. I had a couple problems with the install script, but I was able to work through them.
First I was getting an error with php-gettext. The script would pass the installation step, but when it went back to verify it would die on that step. I tried to manually install it and found out that php-gettext has been deprecated and replaced with php-php-gettext (which was already installed on my system). By changing lines 22 and 23 of /lib/redhat/config.sh to call php-php-gettext instead I was able to get past that error.

I found that solution in the wiki for [URL=‘http://www.fogproject.org/wiki/index.php/Installation_on_CentOS_5.3#CentOS_5.5’]Centos here[/URL].

Next I was getting an error with the NSF server. I was getting:
[B]Setting up and starting NFS Servererror reading information on service nfs: No such file or directory[/B] [B]…Failed![/B]

Turns out the calls to stop and restart the service were not correct for the OS any more. An other file edit. This time /lib/redhat/functions.sh. Lines 108-110 need to be changed to:

chkconfig nfs-server.service on;
systemctl restart nfs-server.service >/dev/null 2>&1;
systemctl status nfs-server.service >/dev/null 2>&1;
I found that [URL=‘http://fogproject.org/forum/threads/nfs-server-unrecognized-on-fedora-16.542/’]solution here.[/URL]
And that’s pretty much what I was going to put into the wiki for now, in hopes the information will be helpful to others. Can I get the same user name on the wiki as I have here?