It looks like we have resolved this issue by installing Ubuntu 14.04 on both our FOG server and image server and then installing the GlusterFS as per Tom’s advice. Thank you Tom for all of your help.

Thanks for your replay. I upgrade from 1.1.1 to 1.2.0. I fixed the problem! During the installation, I was asked if I left MySQL password blank, I said no and then left the passwords in blank again. This probably overwrite the php file which was previously creating a password when I said yes.

Thanks

if you wanted to beta you could also use Bittorrent Sync to get the latest changes as well as SVN.

on the host import page, there is a template file to download. if you make your formatting match the template, it should upload.

Yea I don’t want to make any adjustments to the phone system here as that’s priority #1. I wouldn’t feel comfortable putting the file the phones need onto he FOG server as I’m not too familiar with Linux and troubleshooting that would be near impossible. I don’t think the phone vendor would even let me do that.

Thanks for the help, I appreciate it.

Thanks for the suggestions, the fog sever is connected to the internet via a proxy, but the proxy port the server connects to is unauthenticated (locked down only but network acls)

I’ve just tried removing the proxy information and this seems to have fixed the issues (both slow task creation and the multicast grouping issue)

Thanks for your help!

Thanks for the quick reply’s … in my original post I said this is after upgrading from 1.1.2 to 1.2.0.

[quote=“Tom Elliott, post: 34055, member: 7271”]As you’re running 0.32, I believe you need to make the password change in /var/www/fog/commons/config.php as well.[/quote]

Sorry, left for home yesterday. I’ve already done this, it’s stated in the wiki.

Tom,
If I left those two fields blank, the snapin seems to run just fine.

Hello, guys!

Really sorry about the time frame. I was able to boot Hiren correctlly usinng the latest version. 15.2.

Thanks everyone for the Help, and let me apologies again for the time i took to reply.

regards,

Chad is on the right track I really seem to be slacking lately, normally I am the first one to recommend the DNSMasq, I have to use it here in my novell network because we use Netware 6.5 and it has a limited number of characters that can be supplied for the boot file name. DNSMasq allows me to circumvent the system and provide the correct boot file.

You can use this guide here [url]http://fogproject.org/wiki/index.php/Using_FOG_with_an_unmodifiable_DHCP_server/_Using_FOG_with_no_DHCP_server#DNSMASQ_settings_for_iPXE[/url]

It will aid you in setting up DNSMasq, and of course if you have problems just come back and let us know.

Good to know…That means “video=uvsafb:mode_option=1024x768-16” would not make any difference, right?

[quote=“scottmcmullan8, post: 33863, member: 24964”]Another update - it appears when the machines that aren’t working are trying to PXE boot they are using Intel Boot Agent Version 1.3.24 however the machines that are working are using a Intel PXE boot agent?[/quote]

Look for Bios Updates/Firmware updates for the machines and see if that has any affect.

Is meraki allowing port 69 UDP/TCP internally?

Progress is shown on all imaging tasks in 1.x.x

Change the kernel back to just plain jane bzImage.64.

As you’re not deploying to the point where it even downloads that, my suspicion is in the boot parameters.

To test this is going to be difficult and I may just request a remote session if at all possible where I can connect and tweak a few file on your fog server.

Hello Elliott!

thanks for the reply, after many attempts I decided to install it again to a new virtual machine with 'ubuntu 14:04 LTS.

I installed the new version fog '1.2.0 and reconfigured with the footsteps of my previous posts.

I’ve tested and everything works perfectly including the / mnt / imagensfog the virtual disk that is where I have the images of the OS.

I exported the ‘cvs the old machine with 143’ hosts made ​​the link to the images of the OS already had, and everything works OK now.

from the old machine do not know where the problem lay not know if it would be for version 12 ‘ubuntu even if it was for doing the installation over some old version of’ DB fog or even problems in version 'fog 1.1 .2.

what I am sure is that FTP works in the old machine. because I can access the fog machine via FTP (Fillezila) client with user credentials’ fog
created when you install the 'ubuntu. I can edit, create pictures from the / mnt / imagensfog and / mnt / imagensfog / dev

How it works now I think we can now close the POST, the posts that I put the changes that are needed to mount another hard work.

Thank you for everything

\ GF

Thanks all I was on the right path but now i’ve got it working just right thanks for the help!
Incase it helps anyone else here is the FirstLogin Commands i use to auto activate windows 7 OS and Microsoft office 2010 using sysprep

[CODE] <FirstLogonCommands>
<SynchronousCommand wcm:action=“add”>
<CommandLine>cscript /b c:\windows\system32\slmgr.vbs /ato</CommandLine>
<Order>1</Order>
<RequiresUserInput>false</RequiresUserInput>
<Description>Act OS</Description>
</SynchronousCommand>
<SynchronousCommand wcm:action=“add”>
<Order>2</Order>
<CommandLine>cscript “C:\Program Files (x86)\Microsoft Office\Office14\ospp.vbs” /act</CommandLine>
<RequiresUserInput>false</RequiresUserInput>
<Description>Act Offfice</Description>
</SynchronousCommand>
<SynchronousCommand wcm:action=“add”>
<CommandLine>sc config “FOG Service” start= auto</CommandLine>
<Order>4</Order>
<Description>Change FOG service from delay to Automatic</Description>
</SynchronousCommand>
<SynchronousCommand wcm:action=“add”>
<CommandLine>timeout 20</CommandLine>
<Description>Pause for 20 seconds</Description>
<Order>3</Order>
</SynchronousCommand>
<SynchronousCommand wcm:action=“add”>
<Order>5</Order>
<Description>Enable the fog service</Description>
<CommandLine>net start “FOG Service”</CommandLine>
</SynchronousCommand>
</FirstLogonCommands>[/CODE]