• Some Troubleshooting Tips

    3
    0 Votes
    3 Posts
    2k Views
    JunkhackerJ

    but if you’d like to contribute there is an official wiki that badly needs attention. just ask for credentials in this thread [url]http://fogproject.org/forum/threads/requests-for-wiki-access-ask-here.3811/[/url]

  • Error when trying to download image

    9
    0 Votes
    9 Posts
    4k Views
    R

    To resolve my problem I had to uninstall and re-install FOG.

    I know that adding a user account and using it for FOG shouldn’t of caused this problem. Could running two different download task cause this problem?

  • Postdownloadscripts and fogprep

    2
    0 Votes
    2 Posts
    2k Views
    JunkhackerJ

    fogprep is no longer needed

  • How to modify PXE boot menu in FOG 1.2.0

    4
  • FOG 1.2.0 install instructions ?

    2
    0 Votes
    2 Posts
    3k Views
    Jaymes DriverJ

    The SVN is bleeding edge, it is not recommended for production environments as we are actively working on bugs and fixes.

    It will ALWAYS appear as the “not the current version” in the GUI because you are on a subversion that does not match the current SUPPORTED version. This won’t cause problems and is merely cosmetic, however it is the test bed where we actively work to find solutions to issues user post. It is not WRONG to use the SVN, but if you plan for a production environment, it would probably be better to at least start with the supported version and if you have issues we will tell you to install the latest release in the SVN.

    The sourceforge link is the current supported version.

  • How To: Setup a FOG storage node without installing fog?

    9
    0 Votes
    9 Posts
    12k Views
    x23piracyX

    Hi,

    no, but that works until you have working nfs and ftp running.
    It’s time to cut additional storage nodes out of fog binding.

    I think it’s wrong to force people to install fog on each storage node.
    The most problem is that people or companys have a big storage system but we cannot install a linux on it to make fog running.

    One of the big goal is indipendent storage nodes for fog!

    Regards X23

  • FOG reachable under webroot instead of /fog

    3
    0 Votes
    3 Posts
    3k Views
    P

    i just added this line to my 000-default.conf

    Redirect /index.html [url]http://(fogserver)/fog/management/[/url]

  • FOG 1.0.0 RC install on Ubuntu Server 14.04

    8
    0 Votes
    8 Posts
    6k Views
    T

    [quote=“Tom Elliott, post: 33056, member: 7271”]Multicast seems to work now. I’m going to go out on a limb and say with 0.32, when you tried installing it failed at UDPCast? This would be the only reason I can imagine why 32bit was needed. This was a common issue.[/quote]

    Yes, you are right. It failed with UDPCast. Is there another way of multicast?
    For me Multicast (UDPCast) still fails with Fog 1.1.2 and Ubuntu 12.04. (Uploading and Imaging of single clients works)
    I also tried with debian 7.6 with the user-change of the images-folder (chown -R fog.root /images)
    Storing the password for tftp-user in fog-webmin for debian seems to be not necessary anymore.

  • Install Fog 1.1.2

    5
    0 Votes
    5 Posts
    3k Views
    JunkhackerJ

    among the list of distro’s to install fog on, debian probably receives the most praise, and Ubuntu 14.04 the most scorn.
    personally, i run Ubuntu 12.04 LTS server, however.

  • [Request] FOG NAS Tutorial

    19
    0 Votes
    19 Posts
    15k Views
    W

    Have this working with Freenas… Thank you Joshua…

  • Deployment tutorial please

    4
    0 Votes
    4 Posts
    3k Views
  • Diskless boot windows XP image

    8
    0 Votes
    8 Posts
    6k Views
    M

    thanks for info and a great project.
    i think it has a great potential to grow.
    i’ve forgotten the things we have done 5 years ago and looked for the same solution but more managable.
    we have used iSCSI and later AOE to boot windows diskless PCs over ethernet.
    iSCSI had many issues on booting and work stability: each PC should have its own image and locks it while usage. if some packet loss occures PC hangs because the driver tries to keep connection alive and fails on packet loss (like HDD loss). It had great issue on client count same time booting: if more than 10 - other failed to boot because of timeouts etc…
    AoE worked perfectly with one image for all clients and without hangs on packet loss.
    Also Windows need one small tool from Windows Embedded called FBWF (File Base Write Filter) to make the bootable disk read only caching file changes on bootable disk to memory untill the next reboot (very great tool to keep system partition virus clean even on local PCs). Page file must be off and RAM should be 2+ Gb to handle RAM bootable partition (500-800Mb) and other running programs.
    So the most powerfull profit was to get bootable Windows partition over network with network mounted work read-write partiion.

    I hope sometimes you will include this functionality in your project to make it really powerfull solution to do whatever any one needs to create and maintain large amount of client PCs.

  • Cisco Programming Guide

    5
    0 Votes
    5 Posts
    3k Views
    Jaymes DriverJ

    [quote=“mark graham, post: 30784, member: 4117”]yeah, i’m pretty familiar with them 🙂

    let me whip something up when i can! hopefully within the next week i’ll have something.[/quote]

    Thank you SO MUCH!!!

  • Can not log into the domain after deployement image

    11
    0 Votes
    11 Posts
    8k Views
    R

    The service is OK but as regards the cron style deploy in the GUI is launched I 3 and I do not see anywhere he yt there log on the server as in Task Management> Scheduled Tasks there a display issue and that is all white …

    can they be changed manually in the table of cron?

    Le service est OK mais en ce qui concerne le cron style deploy dans l’interface graphique j’en est lancé 3 et je ne les vois nul part, il y t il des log sur le server car dans task management >[URL=‘http://200.133.56.10/fog/management/index.php?node=tasks&sub=sched’]Scheduled Tasks il y a un problème d’affichage et c’est tout blanc…[/URL]

    peut on les modifier à la main dans la table de cron ?[URL=‘http://200.133.56.10/fog/management/index.php?node=tasks&sub=sched’][/URL]

  • FOG 1.0.1 RC install on Ubuntu Server 14.04

    6
    0 Votes
    6 Posts
    5k Views
    Tom ElliottT

    If you’re using the RT-N66U Router, I’d highly recommend using dd-wrt firmware on it.

    I can ensure that it works.

  • CentOS 6.5 x86_64 Installation process & failure with FOGFTP

    9
    0 Votes
    9 Posts
    4k Views
    D

    [quote=“Tom Elliott, post: 29258, member: 7271”]The date.timezone error you’re seeing, is this still an issue?

    Edit the php.ini file and place your timezone setting there.[/quote]

    Found the file and edited according & no more errors.
    File path:
    /etc/php.ini

    [code]
    Date]
    ; Defines the default timezone used by the date functions
    ; http://www.php.net/manual/en/datetime.configuration.php#ini.date.timezone
    date.timezone = ‘America/Los_Angeles’
    [/code]

  • How to: Modify the PXE boot menu to allow the booting of .iso files

    57
    0 Votes
    57 Posts
    178k Views
    Juan AntonioJ

    I´ve used memdisk from /tftpboot and it worked with fog 0.32:)

  • PXE boot from old server to fog 1.0.1.

    3
    0 Votes
    3 Posts
    2k Views
    T

    [quote=“jbsclm, post: 27870, member: 3158”]also see my previous post

    [url]http://fogproject.org/forum/threads/chain-booting-0-33-beta-from-0-32.10156/[/url][/quote]

    Nice! Did not find it when i was looking for a solution to this. Much cleaner than what i did 😄

  • Partclone

    6
    0 Votes
    6 Posts
    3k Views
    B

    [quote=“Tom Elliott, post: 27535, member: 7271”]This thread is fairly old. Almost as old as when I first moved to partclone in the first place. When we released 1.0.0, we defaulted current images as legacy as most people were upgrading from 0.32 to 1.X.X. This means there’s no more need to download, tweak, and reupload. Hope this helps.[/quote]

    I only posted this because I just did a fresh install of 1.0.1 last night and I had that problem with old images that I was using. The screen told me my images weren’t partclone images. I wasn’t aware of any legacy option.

    BTW, thanks for the hard work. 🙂

  • Binding Isos undionly.kpxe

    2

144

Online

12.3k

Users

17.4k

Topics

155.6k

Posts