Printer not showing in Devices - Fixup to 1.3.0-RC-5

[Joe Schmitt]

Its odd that you can print to it but its not showing. Try looking into this issue elsewhere. A quick Google on my part showed this wasn’t FOG specific. People have issues where it won’t show in the device list but can still be printed to.

[Raymond Bell]

@Joe-Schmitt
I am unable to print to it is say you must first install a printer

[Raymond Bell]

@Wayne-Workman
@Joe-Schmitt

Ok so i disabled the printer
deleted all printer ip port
rebooted
added printer back in fog ui
check fog log and see this

EDIT: I am able to add the printer manually and it shows up fine

------------------------------------------------------------------------------
--------------------------------PrinterManager--------------------------------
------------------------------------------------------------------------------
 8/3/2016 10:52 AM Client-Info Client Version: 0.11.4
 8/3/2016 10:52 AM Client-Info Client OS:      Windows
 8/3/2016 10:52 AM Client-Info Server Version: 1.3.0-RC-5
 8/3/2016 10:52 AM Middleware::Response Success
 8/3/2016 10:52 AM PrinterManager Getting installed printers
 8/3/2016 10:52 AM PrinterManager Adding printers
 8/3/2016 10:52 AM Printer Adding: es-86-HP400
 8/3/2016 10:52 AM Printer --> IP = 10.24.11.86
 8/3/2016 10:52 AM Printer --> Port = IP_10.24.11.86
 8/3/2016 10:52 AM Printer --> File = C:\Printers\hp400\hpcm401c.inf
 8/3/2016 10:52 AM Printer --> Config =
 8/3/2016 10:52 AM Printer --> Model = HP LaserJet 400 M401 PCL 6
 8/3/2016 10:52 AM PrinterManager PrintUI has not finished in a timely fashion, abandoning process
 8/3/2016 10:52 AM PrinterManager Restarting spooler
------------------------------------------------------------------------------

then this

------------------------------------------------------------------------------
--------------------------------PrinterManager--------------------------------
------------------------------------------------------------------------------
 8/3/2016 10:54 AM Client-Info Client Version: 0.11.4
 8/3/2016 10:54 AM Client-Info Client OS:      Windows
 8/3/2016 10:54 AM Client-Info Server Version: 1.3.0-RC-5
 8/3/2016 10:54 AM Middleware::Response Success
 8/3/2016 10:54 AM PrinterManager Getting installed printers
 8/3/2016 10:54 AM PrinterManager Adding printers
 8/3/2016 10:54 AM PrinterManager es-86-HP400 has already been configured
------------------------------------------------------------------------------

[Joe Schmitt]

That means the printer configuration is bad.

[Raymond Bell]

@Joe-Schmitt But it is the same as it always has been

I am looking in the reg to see if something in there may be the issue

[Wayne Workman]

I’m on 1.3.0 RC-6 with client 0.11.4 and having the exact same issue described here.

The log says printers are already configured, but two of them (AV Room and Teacher’s lounge) are not appearing on this particular computer. The other printer that is configured for this computer appears fine and works.

Here’s a log.
0_1470402284852_fog.log

I’m going to go do more investigating.

[Wayne Workman]

@Joe-Schmitt

Further, the exact same two printers that are not appearing on the computer in that log, they are appearing on my desktop computer and I can print to them just fine. So it’s not an incorrect printer configuration.
Here’s the log from my computer.
0_1470403004330_fog.log

[Joe Schmitt]

Are these all TCP/IP printers?

[Wayne Workman]

@Joe-Schmitt said in Printer not showing in Devices - Fixup to 1.3.0-RC-5:

Are these all TCP/IP printers?

Yes, they are.

With Joe’s guidance, I used the printer manager helper to invaluably troubleshoot the printer issue, by using it to add the printer to the computer. It gave a message saying the right driver couldn’t be found.

I then setup an anonymous read share on the server, stuck the drivers in it, pointed the fog printer to the exact .inf file, and it worked.

I feel the printer manager helper should be added to the downloads list in the fog UI as a utility.

[Raymond Bell]

@Wayne-Workman
@Joe-Schmitt

Funny thing is it works fine on most all computer just not on a couple.
And i even change the driver and still can not get it to work even after deleting computer from fog and image and add printer back to it

here is the log file
0_1470414434028_fog.log

[Wayne Workman]

Raymond had the same issue I had, I remoted in via join.me and did the same troubleshooting steps that Joe instructed me to do. It gave a driver error. We swapped out the driver for another and it worked. We did some tests with removing the printer via fog and re-adding it, both were successful…

Unlike my work, Raymond has copied all drivers he needs to the local c:\ drive, in a hidden folder. This appears to be working, but there was simply an issue with one of the specified drivers. It could have been something as simple as a typo, or an incompatible driver, or bad arch or something, not sure. At work, we are successfully using a anonymous read share to distribute drivers now and it’s working, and this problematic printer Raymond has is now also working.

using the printer manager helper is the first way to troubleshoot a printer deployment issue. It’s got a 2nd tab at the top for adding a printer. Just plug in the settings you have for the fog printer, and hit add. It’ll either work or throw an error which will guide you to a solution.

Here is the link to the printer manager helper, you will want to use the version corresponding to the fog client version you’re using:
https://github.com/FOGProject/fog-client/releases

[Raymond Bell]

All is good to go now…