@Tom-Elliott I change name manually then i made some tests from fog interface and it seems to work.
Just after that i had a problem to join to samba domain.
I had to rewrite the same password on active directory field to make it works

@Tom-Elliott
It’s little strange as you can see on the picture, echo %computername% give the good name (same as in the fog interface) But it’s not the same in system property

0_1463052798585_fog.log

@Tom-Elliott I’ve got quiet same problem without error message in fog.log.
With latest version (5441 => 7593) and 0.10.6 client
The host doesn’t change name

@EAHarvey I’ve got same problem with latest version (5441 => 7593)
and 0.10.6 client

@Scott-B It seems that with the latest of fog (7410) and the latest client (0.10) everything is OK.
Can you confirm that ?

Could you please do another debug deploy (Multiple partition - single disk) and keep your eyes open for Clearing part /dev/sdaX messages

Actually i use this kind of image :
default: Windows 7
Multiple Partition Image - Single Disk (Not Resizable)
Everything

7104 version
then i made a deploy task debug mode. I didnt see any Clearing part /dev/sdaX messages
and again the 0xc00000e error

i upgraded to 7196 version, i made the deploy task debug mode again
Same problem (0xc00000e error)

@plegrand said in 0xc00000e:

@Sebastian-Roth said in 0xc00000e:

Nevertheless you can always try non-resizable. Just create a new image definition and upload from that client again. The non-resizable upload does less magic and should not cause any error on the machine. Then try deploy and see if it works.

what i have to choose between
Multiple Partition Image - Single Disk (Not Resizable) - (2)
and
Multiple Partition Image - All Disks (Not Resizable) - (3)
?

Then i choose " Multiple Partition Image - Single Disk (Not Resizable) - (2)"
Capture works fine
Deploy fail with 0xc00000e

@Sebastian-Roth said in 0xc00000e:

Nevertheless you can always try non-resizable. Just create a new image definition and upload from that client again. The non-resizable upload does less magic and should not cause any error on the machine. Then try deploy and see if it works.

what i have to choose between
Multiple Partition Image - Single Disk (Not Resizable) - (2)
and
Multiple Partition Image - All Disks (Not Resizable) - (3)
?

@Sebastian-Roth

@Sebastian-Roth

I launch sfdisk command before capture but for the moment i cant do the capture itself because i need this computer
Then i’m going to install what i need on this computer, make a ghost image to be sure and then after test capture and deploy with fog.
ok ?

sfdisk -d /dev/sda
label: dos
label-id: 0x97be5b6a
device: /dev/sda
unit: sectors

/dev/sda1 : start=          63, size=       80262, type=de
/dev/sda2 : start=       81920, size=    18313216, type=7, bootable
/dev/sda3 : start=    18395136, size=   507815936, type=7
/dev/sda4 : start=   526211072, size=   450562048, type=f
/dev/sda5 : start=   526213120, size=   450560000, type=7

@Sebastian-Roth i’ll do that tomorrow morning with picture or copy paste from ssh session
thanks again for your help

@plegrand 2_1459936481455_d1p5.ebr 1_1459936481454_d1p4.ebr 0_1459936481453_d1.mbr

Hello i come back again with a new partionning problem

I made a capture of a dell computer, at the end of the capture i’ve got this error message :

" 0xc00000e boot selection failed because a required device is inaccessible".

Then i try to deploy the image to see if it solve the problem and the the computer stuck on “booting…”

I think it’s a partitionning problem as i had before.
[https://forums.fogproject.org/topic/6620/fog-restore-only-one-partition/](link url)
Here is informations about partitions

ls -al /home/images/GEII101/
total 19882180
drwxrwxrwx  2 root root        4096 avril  6 08:58 .
drwxrwxrwx 10 root root        4096 avril  6 08:58 ..
-rwxrwxrwx  1 root root           2 avril  6 08:19 d1.fixed_size_partitions
-rwxrwxrwx  1 root root       32256 avril  6 08:22 d1.mbr
-rwxrwxrwx  1 root root         365 avril  6 08:22 d1.minimum.partitions
-rwxrwxrwx  1 root root          62 avril  6 08:22 d1.original.fstypes
-rwxrwxrwx  1 root root           0 avril  6 08:19 d1.original.swapuuids
-rwxrwxrwx  1 root root       78748 avril  6 08:22 d1p1.img
-rwxrwxrwx  1 root root  6140950340 avril  6 08:32 d1p2.img
-rwxrwxrwx  1 root root 14217811629 avril  6 08:58 d1p3.img
-rwxrwxrwx  1 root root         512 avril  6 08:58 d1p4.ebr
-rwxrwxrwx  1 root root         512 avril  6 08:22 d1p5.ebr
-rwxrwxrwx  1 root root      428296 avril  6 08:58 d1p5.img
-rwxrwxrwx  1 root root         365 avril  6 08:19 d1.partitions

cat /home/images/GEII101/d1.minimum.partitions
label: dos
label-id: 0x73ee0dbc
device: /dev/sda
unit: sectors

/dev/sda1 : start=          63, size=       80262, type=de
/dev/sda2 : start=       81920, size=    16748252, type=7, bootable
/dev/sda3 : start=    18395136, size=    75761314, type=7
/dev/sda4 : start=   526211072, size=   450562048, type=f
/dev/sda5 : start=   526213120, size=   450560000, type=7

cat /home/images/GEII101/d1.original.fstypes
/dev/sda2 ntfs
/dev/sda3 ntfs
/dev/sda4 imager
/dev/sda5 ntfs

cat /home/images/GEII101/d1.partitions
label: dos
label-id: 0x97be5b6a
device: /dev/sda
unit: sectors

/dev/sda1 : start=          63, size=       80262, type=de
/dev/sda2 : start=       81920, size=    18313216, type=7, bootable
/dev/sda3 : start=    18395136, size=   507815936, type=7
/dev/sda4 : start=   526211072, size=   450562048, type=f
/dev/sda5 : start=   526213120, size=   450560000, type=7

@Sebastian-Roth

• I removed the “revertbcd” script of Tom.
• Remove old image with file
• Create image
  fog-windows7 - 16
  default: Windows 7
  Single Disk - Resizable
  Everything- Associate image to client
• Associate image to client
• Launch Basic task capture
• Capture works fine and windows start normally
• Launc basic task deploy
• … It works !!!

@Sebastian-Roth Hello

• The “revertbcd” script of Tom is still present, i didnt know if i had to remove it
• Upgrade to 4981 / 6663
• Remove old image with file
• Create image
  fog-windows7 - 15
  default: Windows 7
  Single Disk - Resizable
  Everything
• Associate image to client
• Launch Basic task capture
• Capture works fine and windows start normally
• Launc basic task deploy
• … It works !!!

@Sebastian-Roth argh …
for this test i let it …

@Sebastian-Roth Hello
do i have to keep the “revertbcd” script ?

@Sebastian-Roth May be i could give you access to this machine if it’s usefull ?

@Sebastian-Roth Hello
then after restoring ghost image i launch debug capture task and then

mkdir -p /ntfs
ntfs-3g -o force,rw /dev/sda3 /ntfs
find /ntfs -type f -iname "SYSTEM"
/ntfs/Windows/System32/config/RegBack/SYSTEM
/ntfs/Windows/System32/config/system


mv /ntfs/Windows/System32/config/system /ntfs/Windows/System32/config/SYSTEM.moved
mv /ntfs/Windows/System32/config/SYSTEM.moved /ntfs/Windows/System32/config/SYSTEM

find /ntfs -type f -iname "SYSTEM"
/ntfs/Windows/System32/config/RegBack/SYSTEM
/ntfs/Windows/System32/config/SYSTEM

umount /ntfs/

fog to launch capture task
reboot
After capture windows 7 works fine.

Deploy task
Same problem : stuck on “booting …”

I keep the Tom’s script (revertbcd) may be i should remove it ?

@Sebastian-Roth said:

mkdir -p /ntfs
ntfs-3g -o force,ro /dev/sda3 /ntfs
find /ntfs -type f -iname "SYSTEM"

find /ntfs -type f -iname “SYSTEM”
/ntfs/Windows/System32/config/RegBack/SYSTEM
/ntfs/Windows/System32/config/system