0xc00000e

plegrand

Hello i come back again with a new partionning problem

I made a capture of a dell computer, at the end of the capture i’ve got this error message :

" 0xc00000e boot selection failed because a required device is inaccessible".

Then i try to deploy the image to see if it solve the problem and the the computer stuck on “booting…”

I think it’s a partitionning problem as i had before.
[https://forums.fogproject.org/topic/6620/fog-restore-only-one-partition/](link url)
Here is informations about partitions

ls -al /home/images/GEII101/
total 19882180
drwxrwxrwx  2 root root        4096 avril  6 08:58 .
drwxrwxrwx 10 root root        4096 avril  6 08:58 ..
-rwxrwxrwx  1 root root           2 avril  6 08:19 d1.fixed_size_partitions
-rwxrwxrwx  1 root root       32256 avril  6 08:22 d1.mbr
-rwxrwxrwx  1 root root         365 avril  6 08:22 d1.minimum.partitions
-rwxrwxrwx  1 root root          62 avril  6 08:22 d1.original.fstypes
-rwxrwxrwx  1 root root           0 avril  6 08:19 d1.original.swapuuids
-rwxrwxrwx  1 root root       78748 avril  6 08:22 d1p1.img
-rwxrwxrwx  1 root root  6140950340 avril  6 08:32 d1p2.img
-rwxrwxrwx  1 root root 14217811629 avril  6 08:58 d1p3.img
-rwxrwxrwx  1 root root         512 avril  6 08:58 d1p4.ebr
-rwxrwxrwx  1 root root         512 avril  6 08:22 d1p5.ebr
-rwxrwxrwx  1 root root      428296 avril  6 08:58 d1p5.img
-rwxrwxrwx  1 root root         365 avril  6 08:19 d1.partitions

cat /home/images/GEII101/d1.minimum.partitions
label: dos
label-id: 0x73ee0dbc
device: /dev/sda
unit: sectors

/dev/sda1 : start=          63, size=       80262, type=de
/dev/sda2 : start=       81920, size=    16748252, type=7, bootable
/dev/sda3 : start=    18395136, size=    75761314, type=7
/dev/sda4 : start=   526211072, size=   450562048, type=f
/dev/sda5 : start=   526213120, size=   450560000, type=7

cat /home/images/GEII101/d1.original.fstypes
/dev/sda2 ntfs
/dev/sda3 ntfs
/dev/sda4 imager
/dev/sda5 ntfs

cat /home/images/GEII101/d1.partitions
label: dos
label-id: 0x97be5b6a
device: /dev/sda
unit: sectors

/dev/sda1 : start=          63, size=       80262, type=de
/dev/sda2 : start=       81920, size=    18313216, type=7, bootable
/dev/sda3 : start=    18395136, size=   507815936, type=7
/dev/sda4 : start=   526211072, size=   450562048, type=f
/dev/sda5 : start=   526213120, size=   450560000, type=7

plegrand

@plegrand 2_1459936481455_d1p5.ebr 1_1459936481454_d1p4.ebr 0_1459936481453_d1.mbr

Sebastian Roth

@plegrand You have the most interesting partition layouts in the universe. Recovery and extended partition. Let’s see if we can still handle this. I did some tests with the information you gave and upload is working for me without corrupting the partition table on the source system (your’s was corrupted if I understood correctly). So what I need you to do is to get the machine in the original state (you have done this already as I know from the chat!), then schedule a debug upload task and run sfdisk -d /dev/sda. Please take a picture of the screen because I need the exact numbers! If those numbers are different from what you posted as d1.partitions then you can just stop here and wait till I have figured it out. But if the numbers you see (again - please take a picture so we can check as well!) are exactly the same as in d1.partitions then you need to run capture (command fog) and check output of sfdisk -d /dev/sda right after capture has finished to see if it is corrupted again and possibly why (take a picture and post here!).

plegrand

@Sebastian-Roth i’ll do that tomorrow morning with picture or copy paste from ssh session
thanks again for your help

plegrand

@Sebastian-Roth

I launch sfdisk command before capture but for the moment i cant do the capture itself because i need this computer
Then i’m going to install what i need on this computer, make a ghost image to be sure and then after test capture and deploy with fog.
ok ?

sfdisk -d /dev/sda
label: dos
label-id: 0x97be5b6a
device: /dev/sda
unit: sectors

/dev/sda1 : start=          63, size=       80262, type=de
/dev/sda2 : start=       81920, size=    18313216, type=7, bootable
/dev/sda3 : start=    18395136, size=   507815936, type=7
/dev/sda4 : start=   526211072, size=   450562048, type=f
/dev/sda5 : start=   526213120, size=   450560000, type=7

Sebastian Roth

@plegrand I did play with the partition stuff you gave me once again and I cannot reproduce the issue. Well I don’t have all the data you have on your partitions and that might be the difference. From what I can see and test the partition tables are not being screwed on upload but I don’t know what you have in those partitions…

Possibly you can give me some more information about what is stored on the partitions?

sda1 (type dell utility, size 40MB, used ~1MB): possibly recovery tools??
sda2 (type ntfs, size 8.8GB, used ~7-8GB): maybe recovery data??
sda3 (type ntfs, size 242GB, used ~15-20GB): windows?
sda5 (type ntfs, size 215GB, used ~1MB): intended for user data?

Please open disk management in windows to see if you can match my guesses and tell me if I stand correct.

Nevertheless you can always try non-resizable. Just create a new image definition and upload from that client again. The non-resizable upload does less magic and should not cause any error on the machine. Then try deploy and see if it works.

plegrand

@Sebastian-Roth

plegrand

@Sebastian-Roth said in 0xc00000e:

Nevertheless you can always try non-resizable. Just create a new image definition and upload from that client again. The non-resizable upload does less magic and should not cause any error on the machine. Then try deploy and see if it works.

what i have to choose between
Multiple Partition Image - Single Disk (Not Resizable) - (2)
and
Multiple Partition Image - All Disks (Not Resizable) - (3)
?

plegrand

@plegrand said in 0xc00000e:

@Sebastian-Roth said in 0xc00000e:

Nevertheless you can always try non-resizable. Just create a new image definition and upload from that client again. The non-resizable upload does less magic and should not cause any error on the machine. Then try deploy and see if it works.

what i have to choose between
Multiple Partition Image - Single Disk (Not Resizable) - (2)
and
Multiple Partition Image - All Disks (Not Resizable) - (3)
?

Then i choose " Multiple Partition Image - Single Disk (Not Resizable) - (2)"
Capture works fine
Deploy fail with 0xc00000e

plegrand

Could you please do another debug deploy (Multiple partition - single disk) and keep your eyes open for Clearing part /dev/sdaX messages

Actually i use this kind of image :
default: Windows 7
Multiple Partition Image - Single Disk (Not Resizable)
Everything

7104 version
then i made a deploy task debug mode. I didnt see any Clearing part /dev/sdaX messages
and again the 0xc00000e error

i upgraded to 7196 version, i made the deploy task debug mode again
Same problem (0xc00000e error)

Sebastian Roth

@plegrand Can you please try the known methods of fixing bootup errors by booting the windows recovery DVD. Get to the command prompt and run chkdsk /f /x /r C:. Then reboot and see if you have any changes. If that does not work then please boot the recovery DVD and run bootrec /fixmbr - again reboot to check if this fixed the error. If not try bootrec /fixboot, reboot, check. Then try bootrec /rebuildbcd. Please make sure you reboot in between trying those commands to see which of those did/didn’t work. We might get an idea of what is wrong this way.

Sebastian Roth

@plegrand Any news on this?

0xc00000e

154

12.4k

17.4k

155.9k