The problem was the client version. (old version: 0.9.12)
I had to install the new one on each computer (0.11.9), then reboot each computer.
Then “reset encrypted data” on the group
Now it works fine.
I thought that once there was a new version on the server the client updated “alone”.

@wayne-workman i used " your packages line" and it seems to work.
Then now i have to test pxe boot, capture and deploy !!

THanks for your help

@george1421
Hello, it seems that the problem came from the configuration left over on the workstation, which still contained snappins that were no longer needed and no longer applicable.
.

Hi, I’m looking for a solution to customize the default profile (Windows 10 and 11).
I don’t want to use the “sysprep + copyprofile” solution.
Profiletool seems to be out of development and neither does defprof.
And defprof doesn’t seem to create a “clean” profile, as we have a lot of problems with startup times once defprof has been applied.
So if you have a miracle solution for this kind of task, I’d love to hear from you!
Thanks in advance for your help.
Pascal

@need2 now i agree with you : if you accept that mysql root has no password
and if you know that if installer told you to go to http://192.168.39.243/fog it means you have to go to http://192.168.39.243/html/fog.
I know it’s a ridiculous bug of the default installer (without parameters) but it disturbed me

any way fog seems to be a great program, the forum is very reactif and it permit me to go on
Then thanks again for your help i appreciate
sorry for my poor english
@Tom Elliot : i will try with --docroot to tell you if it works.
But can you confirm me that the installer without parameters make a mistake between http://192.168.39.243/fog and http://192.168.39.243/html/fog to be sur we are agree ?

Thanks again for your help everybody !!

Hello,
in first thank a lot for your answer.
For my test i’m going to work with a virtual machine with only one interface, then forget the “3 networks”
I begin by installing fog like that :
(i use my own dhcp server)

Type d’installation : N
IP du serveur FOG : 192.168.39.243
Would you like to setup a router address for the DHCP server? : n
Would you like to setup a DNS address for the DHCP server and client boot image? : n
Would you like to change the default network interface from eth0? : n
Would you like to use the FOG server for DHCP service? n
This version of FOG has internationalization support, would you like to install the additional language packs? n

My own dhcp server is configured like that (it has 192.168.39.247 for ip address):
subnet 192.168.39.0 netmask 255.255.255.0 {
range 192.168.39.40 192.168.39.230;
option subnet-mask 255.255.255.0;
option broadcast-address 192.168.39.255;
option routers 192.168.39.254;
next-server 192.168.39.247;
filename “pxelinux.0”;
}
then next server is the dhcp server itself

Here is a part of the PXE configuration (on my own dhcp server. (The dhcp server act as dhcp, tftp and pxe server)

DEFAULT vesamenu.c32
KBDMAP fr.kbd
MENU BACKGROUND splash.jpg
menu color title 1;37;40 #ffffffff #00000000 std
menu color timeout_msg 37;40 #80ffffff #00000000 std
menu color timeout 1;31;40 #ffff0000 #00000000 std
menu color border 30;44 #00000000 #00000000 none

TIMEOUT 300
ALLOWOPTIONS 0
PROMPT 0

MENU TITLE MENU
LABEL BootNormal
MENU LABEL Boot local
MENU DEFAULT
COM32 chain.c32
APPEND hd0

LABEL Drivers_Universels
MENU LABEL Drivers Universels
KERNEL memdisk
APPEND keeppxe floppy initrd=ghost/universels.img

LABEL hdt
MENU LABEL Hardware Detection Tool
COM32 hdt/hdt.c32
APPEND modules=hdt/modules.pcimap pciids=hdt/pci.ids

LABEL memtest
MENU LABEL Memtest86+
LINUX hdt/memtest86±4.20.bin

My question is how i could add entry for fog server using ipxe while i’m iusing pxe (pxelinux.0)
Thanks again for your help

Hello, i think i’ve got the same problem except i made modification on the web interface :
i didnt want the “images” directory be at the root (/images)
then i copy the images directory into /home/images.

Then i modify the image path on the web interface, i thought it would modify the export file also but it seems not.

then i had to modify manualy the export file. Now it works fine.
Could it be the problem ?

@Jbob Hello
In first sorry for this long delay
I just made the test today with the latest client. Everything seems to work fine !!

@Wayne-Workman said:

@plegrand said:

It’s not our dns servers

You don’t have to use them. You can make your own and direct all hosts to use yours.

I install dynamique DNS with bind and it works fine. Thanks again

@Wayne-Workman
I just made the test unicast (deploy and not multicast)
It’s a room with 12 stations.
2 stations failed
10 works fine (1.6 GB/min)
i’ll tell you more tomorrow

@Tom-Elliott
The upgrade to stable version completed successfully.
I’m now on fog 1.5.10.1673
Thanks again

@Tom-Elliott
Sorry :

Thanks for your help.
It seems to works fine now

@Tom-Elliott
After updating from the stable branch, I am still on 1.5.10.

@Tom-Elliott No proxy and no network problem here

@Tom-Elliott
After “git checkout lib/common/functions.sh”
I’m stuck on Downloading kernel, init and fog-client binaries…

curl --silent -kOL https://github.com/FOGProject/fos/releases/latest/download/init.xz

• Could not download init.xz properly

@plegrand In fact i modify this file because of an error during install
1473 lastlog -u $username | tail -n1 | grep “**.***” >/dev/null 2>&1

I replace lastlog by lastlog2

@Tom-Elliott But i didnt modify this file:
lib/common/functions.sh

@Tom-Elliott

I’ve got an error :

git checkout stable
erreur : Vos modifications locales aux fichiers suivants seraient écrasées par l'extraction :
        lib/common/functions.sh
Veuillez valider ou remiser vos modifications avant de basculer de branche.
Abandon

git checkout stable
error: Your local changes to the following files would be overwritten by the checkout:
        lib/common/functions.sh
Please commit or stash your changes before switching branches.
Abandon

git branch
 dev-branch
* master

@Tom-Elliott
What is the procedure for using the stable branch?
Currently, I usually do it this way:

git clone https://github.com/FOGProject/fogproject.git /home/fog-depot
cd /home/fog-depot
git branch
git checkout master or git checkout dev-branch
git init
git pull
cd bin/
./installfog.sh

Thanks for your help

@Tom-Elliott
Hello,
After updating and running a few tests, I noticed an error message in the logs:
fog env[1608]: PHP Warning: Increment on type bool has no effect, this will change in the next major version of PHP in /var/www/html/fog/lib/fog/fogbase.class.php on line 974

What could be the solution to this problem?

Thanks for your help