@Tom-Elliott said in Problem on HP ProBook 650g2:

Why pxelinux.0? Typically you should be using ipxe.pxe or undionly.kpxe or undionly.kkpxe.
At the beginning i used to use only “PXE” and it was the configuration on my own DHCP server. It worked fine also with fog then i decided to not make any changes.
I have to say that ipxe (and uefi also) is very new for me and also little difficult to understand
The problem is just today with this new computer.
Then i would have to copy ipxe.pxe from the fog server (/tftpboot/ipxe.pxe) to my dhcp server and modify my dhcpd.conf file (filename “ipxe.pxe”;) ?
The problem is that my dhcp server is used also for other application than fog

While it may have worked for that system, we often see issues with systems when trying to use pxelinux.0 and inform people to use the proper files to correct the issue.
What i will have to do to solve this problem ?

That said, I don’t think the register happened properly and there was an error. I believe you missed the message actually stating the error. Of course this will need more confirmation first.
I cant see other error message during boot

Thanks for your help

Server

• FOG Version: 1.3.0-RC-23 (6017)
• OS: Linux Debian stable

Client

Description

I use my own dhcp server and tftp server (192.168.39.247)

My DHCP server configuration
subnet 192.168.39.0 netmask 255.255.255.0 { # Sous-reseau et masque
range 192.168.39.36 192.168.39.230; # Plage d’addresses
…/…

next-server 192.168.39.247;
filename “pxelinux.0”;

My TFTP server configuration (192.168.39.243 is the ip of the fog server)
LABEL FOG_ETUDIANTS
MENU LABEL Clonage de postes avec FOG pour les postes ETUDIANTS
KERNEL fog/ipxe.krn dhcp && chain http://192.168.39.243/fog/service/ipxe/boot.php?mac=${net0/mac}

During boot i’ve got this error message
Warning using legacy NIC wrapper on 00:00:00:00:00:00
Configuring NET0 00:00:00:00:00:00
error 040ee119
Configuring NET1 98:e7:f4:e8:2b:bd

I launch full registeration and inventory everything works fine but at next reboot :
Host is not registered.
Does someone could help me ?

@Tom-Elliott Thank you for help it’s ok now !!

Hello,
I’ve got a problem each time on the fog home page
It shows :

Pending hosts
Click here to review.

When i click it shows an empty list

What i have to do to solve that ?

Here is the fog version
Running Version 1.3.0-RC-8 SVN Revision: 5949

Thank you for your help.

@george1421
Fri Jul 08, 2016 13:26 pm
Running Version 8301
SVN Revision: 5778

@george1421 Thanks for your answer.
“This site will produce both the undionly.kpxe files and the efi ones based on your initial selection.”

As i’m not very experienced with that, what file i have to produce and where i have to put them ?
In tftpboot ?

Do i have to add embedded script ?
As you can see it’s litle difficult for me ?

But in the past someone told me that putting FOG_KEYMAP = fr, was the solution. Then it’s not ?
https://wiki.fogproject.org/wiki/index.php?title=Boot_Image_Key_Map

@Quazz you mean that if i want azerty keyboard, i have to build my own kernel ?

Hello,
i’ve got a litle problem with the pxe boot. When i have to write gui admin password, the keyboard is on qwerty.
I configure FOG_KEYMAP = fr, without success.
Does someone could explain me what is the way to put azerty keyboard ?

Thanks

@Tom-Elliott
OK

@Tom-Elliott
Wed Jun 29, 2016 12:50 pm
Running Version 8301
SVN Revision: 5778

Linux Fog 3.16.0-4-amd64 #1 SMP Debian 3.16.7-ckt25-2 (2016-04-08) x86_64 GNU/Linux

Port-si-02 is not running

Hello,
i’ve got a lot error message in /var/log/syslog like that :

Jun 29 12:45:48 fog FOGPingHosts[22744]: PHP Warning: fsockopen(): php_network_getaddresses: getaddrinfo failed: Name or service not known in /var/www/fog/lib/fog/ping.class.php on line 38
Jun 29 12:45:48 fog FOGPingHosts[22744]: PHP Warning: fsockopen(): unable to connect to PORT-SI-02:445 (php_network_getaddresses: getaddrinfo failed: Name or service not known) in /var/www/fog/lib/fog/ping.class.php on line 38

i think i didnt have this message before last upgrade.
What could be the problem?
a lot of messages concern shutdown computer

@Mentaloid
Thanks a lot !!
it works fine with only the msi file !!

@Mentaloid it means that i only need the MSMath_x64.msi file , and i dont need these files :

dsetup32.dll
DSETUP.dll
dxdllreg_x86.cab
DXSETUP.exe
dxupdate.cab
Mar2009_d3dx9_41_x64.cab
Mar2009_d3dx9_41_x86.cab
setup.exe
strings.wxl
vcredist_x64.exe

??

Then i just push into the snapin directory this file : MSMath_x64.msi ??

@george1421 yes i saw it and i was wondering :

once extracted, how i had a directory for snapin configuration ?

@george1421 hello,
it’s litle strange because when i launch the snapin task with /Q it seems to work fine because MAthematics is installed and works fine.
When i launch the installer from command line with /Q i have to click on some button during install.
From what i see on the web, this software is little difficult to install silently.

@Wayne-Workman
i think also it’s the problem, then is there a way to create an installer (of this installer) that could answer automatically ?

Hello,
i’m trying to install from a snapin task "Microsoft Mathematics 4 " 64bits
Here is the configuration of this snapin task :

It seems that the task start well, mathematics is installed and works fine but the snapin task doesnt stop.
And i haven’t infobulle saying installation is finished

Here is fog log :
0_1466690062823_fog.log

as you can see, it works fine with 7zip install
i reboot the client once to see if the task stoped

What could be the problem ?

Thanks for your help

@Wayne-Workman did you try with an ftp client ? to see if it works ?
Could it be because the file is in use somewhere else ?

@Bob-Henderson I dont know if tom agree with that but i find out these fields :
snmysqluser=‘root’
snmysqlhost=‘127.0.0.1’

@Bob-Henderson yes i noticed that also but if you find out these fields it will be work again
Are you sure that you have space enough in all your partitions ?
df -h