@Tom-Elliott Thank you for the workaround. It works now, so that will give me the time to look into network issue. Thanks again, you always come through.

This is wierd. All i did was

service FOGScheduler restart

and now it works. Not to say that i restarted the whole server before and that didn’t help and also the status of this service was “running”.

@Tom-Elliott , thank you for the indirect tip.

@george1421 Thank you for the tip. I copied values from .../ipxe/boot.php?mac=<mac_address_you_just_deployed_to> and now it works.

@Quazz Yes, quite a few things are altered.

@george1421 Yes the grub menu that is specified as exit. As with goes into bios i meant that even if i don’t boot to network (no cable), computer wont boot from deployed (Win10 image) hard drive and since it can’t find operating system it goes into bios settings. But that is problem with my image or with bios settings. Maybe the problem is only one partition i tend to merge recovery 500mb partition with the rest. But that is fixable i guess, i am just glad that now after fog upgrade the deployment to NVMe disks works. Also thank you for the tip about KBs updates for Win7.

That is it. Thank you so much guys. Such great community makes using fog even more satisfying.

I solved it with kind of a workaround. I ended up recreating image to be PartClone as this was old image from 0.32 fog and it was PartImage.

I will try your suggestion if I get the same error with the image which can’t be recreated. Thank you.

Yes, simple as that. Thank you.

It worked, thank you very much.

Just to update with the solution. I downloaded 1.1.2 files again and than I ran 1.1.2 setup again; nothing more and now it works, thank you for pointing me in the right direction.

If I remember rightly, and I guess google/bing here is a good tool to use, I think udp port 7 needs opening between networks?