WOOT, Sorry to have caused the problem in the first place, but I am glad it is now working properly.

Found it /etc/dhcp/dhcpd.conf

Thanks Tom!!

other thing to consider you may need IP-helpers configured if it’s layer 3

fixparts is a very powerful tool and can cause damage too. So please make sure you read about those things [B]before[/B] you proceed!! The web is full of information about it, e.g. [url]http://www.rodsbooks.com/fixparts/[/url]

[quote=“Chris Sodey, post: 20979, member: 1418”]I have tried Toms 3.12.4 kernel with the same hanging problem. I have attached a screen shot.[/quote]
Hi
I get the same with a Lenovo X240…

also tried it with [URL=‘https://mastacontrola.com/fogboot/kernel/bzImage’]https://mastacontrola.com/fogboot/kernel/bzImage [/URL]
[URL=‘https://mastacontrola.com/fogboot/kernel/bzImage’]which gives two lines then hangs[/URL]
[URL=‘https://mastacontrola.com/fogboot/kernel/bzImage’][/URL]
thanks
best regards
Oli

If it helps I am running FOG on top of Ubuntu 12.04 LTS server with no GUI. Also, it helps to make sure your linux is fully updated. In ubuntu use the following commands.

sudo apt-get upgrade
sudo apt-get update