Fog issue with new Dell optiplex 7040

[Wayne Workman]

1.0.1 is pretty old.

I know for a fact that FOG Trunk has no issues with the Optiplex 7040. We’ve been imaging them at work here recently.

You might try 1.2.0, but it’s likely to have the same issues. I’d suggest upgrading to fog trunk if your willing. fog trunk is the developmental version, updates are pushed to it many, many times a day. And most feel it’s close to release.

[Wayne Workman]

haha Tom beat me to it by seconds.

[Wayne Workman]

@inafog9 https://wiki.fogproject.org/wiki/index.php?title=Upgrade_to_trunk

I’d recommend the Git or SVN methods. If you have trouble with the written instructions, there are videos in there too at the bottom.

[inafog9]

@Wayne-Workman It appears I’m also having some issues connecting to nameservers. I have checked the normal host files and DNS but do not see anything that would cause this.

[Sebastian Roth]

@inafog9 Which namesevers do you use? cat /etc/resolv.conf

Please post the full output of nslookup books.google.com as well! There might be a “DNS truncation” issue.

[inafog9]

@Sebastian-Roth I’m getting a timeout on the nslookup and I can’t ping anything by name. I tried several config changes including using google’s dns.

[Quazz]

@inafog9 Making changes in resolve.conf won’t do anything as it gets overwritten.

You need to change it in /etc/network/interfaces

Then you need to

sudo ifdown nameofinterface (eg eth0) && sudo ifup nameofinterface

[inafog9]

@Quazz It appears that the interface file has the correct info. I also tried the ifdown command and still no luck.

[Quazz]

@inafog9 Are you using DNSMasq by any chance?

[inafog9]

@Quazz said:

DNSMasq

no

[Tom Elliott]

@inafog9 Is it possible your network doesn’t allow you to defined your own Nameservers?

[inafog9]

@Tom-Elliott Not sure. I can ping nameservers from windows devices and servers.

[Tom Elliott]

@inafog9 Are they set to get the same nameservers as your fogserver is though?

[inafog9]

@Tom-Elliott I’m looking around my windows domain controller and I can’t find those settings.

[Tom Elliott]

@inafog9 What settings?

The DNS is found under the network information in windows.

[Sebastian Roth]

@inafog9 Please set different DNS servers for testing. I have seen trouble with too big (and therefore truncated) DNS answers from the google DNS servers (the ones you have configured as well). Try opendns in your /etc/network/interfaces for example:

...
dns-nameservers 208.67.222.222 208.67.220.220

Then restart the network interface (sudo ifdown eth0 && sudo ifup eth0) and see if DNS lookup is better?!

[inafog9]

@Tom-Elliott I have tried my normal dns and also the google servers. I figured my normal dns could be could be an issue so I tried google.

[inafog9]

@Sebastian-Roth I tried your suggestion and i’m still unable to ping by name.

[Tom Elliott]

@inafog9 Is your fog server/and your systems, setup behind a domain?

[Sebastian Roth]

@inafog9 Are you able to ping the DNS servers?? Maybe DNS queries (UDP port 53) are blocked on your internet router (very unusual!!!)?