Latest Development FOG
-
lol Tom’s working on something. Give him time.
-
Haha okay, it just caught my eye and I thought it was odd that (seemingly) simple text disappeared.
-
SHIFT F5, SHIFT F5, SHIFT F5
-
What the… nevermind, I’m not going to ask why that worked. It’s back now. Thanks
-
For the documentation of all things, Shift+F5 forces your browser to dump its cache for the current page and reload it. Some browsers are too assumptive about what they already know.
-
[quote=“Ben Warfield, post: 46452, member: 17746”]What the… nevermind, I’m not going to ask why that worked. It’s back now. Thanks[/quote]
CTRL F5 is the cache clearing command to refresh the page, it pulls the entire page back down its a miracle worker when troubleshooting issues web based
Sorry to the above poster, I did not see you had already commented but it’s worth the second post !!!
-
[SIZE=5][B]Force Refresh[/B][/SIZE]
Someone just told you to “force reload” your browser to fix something. Depending on your operating system all you need to do is the following key combination:
Windows: ctrl + F5
Mac/Apple: Apple + R or command + R
Linux: F5 -
Hello,
Just for info:
I have update FOG to SVN 3333 and now I’m experiencing problems with deploying snapins.
---------------------------------SnapinClient---------------------------------
4/30/2015 1:49 PM Client-Info Version: 0.7.2
4/30/2015 1:49 PM SnapinClient Running…
4/30/2015 1:49 PM CommunicationHandler URL: [url]http://…/fog/service/servicemodule-active.php?moduleid=snapinclient&mac=34:17:EB:BB:E7:8D||00:00:00:00:00:00:00:E0&newService=1[/url]
4/30/2015 1:49 PM CommunicationHandler Response: Success
4/30/2015 1:49 PM CommunicationHandler URL: [url]http://…/fog/service/snapins.checkin.php?mac=34:17:EB:BB:E7:8D||00:00:00:00:00:00:00:E0&newService=1[/url]
4/30/2015 1:49 PM CommunicationHandler Unknown Response:Also also in Task management pane there is no task in Active Snapin Tasks…but there is in Active Tasks.
The other thing I noticed is that Inventory in Host management is not visible (No results found), but in fog database -> inventory table the data is populated/inserted.
-
[quote=“GregorS, post: 46573, member: 29372”]Hello,
Just for info:
I have update FOG to SVN 3333 and now I’m experiencing problems with deploying snapins.
---------------------------------SnapinClient---------------------------------
4/30/2015 1:49 PM Client-Info Version: 0.7.2
4/30/2015 1:49 PM SnapinClient Running…
4/30/2015 1:49 PM CommunicationHandler URL: [url]http://…/fog/service/servicemodule-active.php?moduleid=snapinclient&mac=34:17:EB:BB:E7:8D||00:00:00:00:00:00:00:E0&newService=1[/url]
4/30/2015 1:49 PM CommunicationHandler Response: Success
4/30/2015 1:49 PM CommunicationHandler URL: [url]http://…/fog/service/snapins.checkin.php?mac=34:17:EB:BB:E7:8D||00:00:00:00:00:00:00:E0&newService=1[/url]
4/30/2015 1:49 PM CommunicationHandler Unknown Response:Also also in Task management pane there is no task in Active Snapin Tasks…but there is in Active Tasks.
The other thing I noticed is that Inventory in Host management is not visible (No results found), but in fog database -> inventory table the data is populated/inserted.[/quote]
To add to upper post…Also it is not working Perform quick host registration and inventory…
I get error Invalid MAC address. -
This post is deleted! -
[quote=“GregorS, post: 46574, member: 29372”]To add to upper post…Also it is not working Perform quick host registration and inventory…
I get error Invalid MAC address.[/quote]I’m getting this error too. I have also tried adding MAC manually via the management portal and it is still saying host is not registered on boot.
I’m running r3334.
-
I had to revert to an older SVN to become a bit more stable but it does work.
Using command " sudo svn up -r <rev # here > to regain some usability.
IE… sudo svn up -r 3318
3318 seemed to be the most stable but it appears to load pxe very slow but it did work as well as Domain join and rename features were operational in this revision.Good luck (remember to run this from your trunk directory ((/opt/trunk)) and don’t forget to install it when your done pulling <rev # Whatever> from the /opt/trunk/bin directory…
-
SVN 3335 released.
It should fix the host mac invalid issue you all were seeing. This was caused because I added (extended?) the QUICKREG_IGNORE_MAC_FILTER to operate all the time. This way if your mac is on that list, it will remove it. I wasn’t seeing the problems because, well, I was testing the ignore macs, most of you with issues probably didn’t have any value in this setting and because the improper checks were in place, all mac’s would be entered into the ignore system meaning it was ignoring even non-filtered mac’s. This should be corrected for now.
-
Thank you for the quick response.
When trying to register host via quick or full, I’m getting invalid Host when sending inventory.
Seems to work fine when I register the host manually via the fog portal.
I’m running r3335
Error Log: [url]http://pastebin.com/AaU7tp66[/url]
Access Log: [url]http://pastebin.com/LAH8Yjje[/url]Edit:
Also getting it on the Fog Client
Log: [url]http://pastebin.com/1wpqGZSz[/url] -
r3335 is good. Fixed the “not registered” thing I was having throughout my whole building (lol).
Gonna settle down on this version for a while, I think.
-
This post is deleted! -
Cmon Tom get it together LMAO… good work for a fast fix!
-
[quote=“samtayuk, post: 46628, member: 3170”]Thank you for the quick response.
When trying to register host via quick or full, I’m getting invalid Host when sending inventory.
Seems to work fine when I register the host manually via the fog portal.
I’m running r3335
Error Log: [url]http://pastebin.com/AaU7tp66[/url]
Access Log: [url]http://pastebin.com/LAH8Yjje[/url]Edit:
Also getting it on the Fog Client
Log: [url]http://pastebin.com/1wpqGZSz[/url][/quote]
please try to remove any information on the pc’s your trying to add to fog (manually or automatically from pxe boot) and try to automatically add from pxe boot menu… see if this helps to allow for the system to repopulate the info correctly. I had to restart my server a few times as well. (restarting tftpd and mysql)Just my .02$
-
[quote=“Bill Rice, post: 46635, member: 927”]please try to remove any information on the pc’s your trying to add to fog (manually or automatically from pxe boot) and try to automatically add from pxe boot menu… see if this helps to allow for the system to repopulate the info correctly. I had to restart my server a few times as well. (restarting tftpd and mysql)
Just my .02$[/quote]
Thank you Bill for replying.
I have tried it and restarted a few time, Made sure the host don’t exist and check phpmyadmin to ensure it was not in the DB at all. Issue still there.When I enter the host in manually via the web portal, the boot menu does display the host registered but the Fog client still have invalid host issue in the log.
-
SVN 3346 no web login gui ( blank screen)
