Posts made by Tom

Found the problem, needed to disable TPM 2.0 security in the Bios prior to deployment.

Tom

Hello all,

Trying to deploy Latitude 7290 image and I receive this:
https://drive.google.com/file/d/1XOJvyCkOMOfCMjn9ycZIRAh3lC-e-kgw/view?usp=sharing
Can someone please shed light why this is happening?

Thanks,

Tom

@george1421 Thank you for the help. Capture seems to be working properly now.
Tom

@george1421 Thanks, testing. I’ll post an update once complete.
Quick question:
If you have an image and I would like to capture new version of it.
Would it ok to overwrite it or capture it as a new entry?

Tom

@george1421 Thanks for quick response. Can you please provide instructions how to do it?

Thanks,

Tom

Hi all,

Fresh build ubuntu 18.04, FOG 1.5.4

When trying to capture, it been slow and then received the CPU error. No issue when deploying.

Read around here that kernel downgrade(to 4.15.2) might be a solution, but the issue was not marked as solved.

1. Is this still the suggested solution?
2. If yes, could you please provide detailed instructions how to do it?

Thank you,

Tom

@tom-elliott Thank you, I will follow the step and let you know if I run into problems.

Tom

Updated FOG to 1.5.2.
The same capture failure occur. Once it’s failed the web dashboard changes to 0.31 dashboard.

Hello all,

Ubuntu 14.04 LTS
FOG 1.5.0
Host Latitude 7270

Trying to capture an image and it’s failing with this error.
Error

In addition, now I cannot boot from PXE
PXE Error

When refreshing the console web page it shows FOG 0.31, if I re-login, it will come back to normal.

Please advise,

Thank you,

Tom

@george1421 In that case, the issue resolved. Thank you for all the help.
Tom

@george1421 The following steps allowed me to capture and deploy 7290 image:

1. Followed the steps in the article, set the policy to Architecture 00009.
2. Build Windows 10 from scratch to eliminate hard drive bitlocker encryption.
3. Disabled TPM in the Bios. (Just to be safe)

Although, everything seems to work, there ACPI errors which I am not sure if it’s a concern.
Please see Video 2 HERE

Thanks,

Tom

Complete the settings as described in the article.
Does anyone knows which uefi architecture E7290 has? I called Dell support, they do not have a clue,

Thanks,

Tom

Here is a short movie of the issue:
Short Video

Dear All,

Fog 1.5
Client: Latitude 7290 with Windows 10

I have Latitude E7290. The boot is uefi and it seems that I cannot change it to legacy.
In addition, it seems that there bitlocker signature on dev\sda3 header. I disable the bitlocker service, but that did not help.

How can I capture\deploy this laptop with FOG?

Please keep in mind that our FOG is servicing other laptop models with legacy bios.

Thank you,

Tom

@george1421

Since it’s working, I’ll keep it as is.

Thank you for the quick resolution and for everything you do.

Tom

@george1421

Thanks George,

After removing the 4123 it seems to be working properly.

Should I keep tpxe or change it back to kkpxe?

Thanks,

Tom

@george1421
Same results with kpxe.
In addition, here are the TFTP server settings:

1.Is the 7270 in uefi or bios mode? Yes
2.Have you updated the firmware in those systems from what was shipped from Dell? current version 1.18.5 ( latest)
3.What (exactly) do you have for dhcp option 67 {boot-file} undionly.kkpxe

Thanks,

Tom

Hello everyone,

Ubuntu 14.04
Client: Latitude E7270

After selecting function from the pxe menu, nothing happens.
Please see short video.
Video
Thanks,
Tom

@sebastian-roth

I cannot say how it was changed. I never touch the settings, unless it is a fresh install which was not the case.

Tom