Posts made by Tom

@george1421 Not that I am aware of. I can try a laptop Dell E7240
and post results.

@george1421 Fog version 6179

Booting in bios mode, Bios is up to date.

Before I had fog 3.1 on Ubuntu 10.1 - there were no issues.

Thank you for your patience.

Tom

@Tom-Elliott The target machine is physical OptiPlex 990. Fog is VM.
Not sure how to proceed?

@Tom-Elliott Yes

@george1421 Yey, my fog is up to date. I’m still getting kernel panic - not syncing.
What can I do?

Thanks,

Tom

@george1421 Here is what I’ve done:

Navigated to svn/trunk/bin
then svn up
it says at revision 4754 - which is stated as the latest svn version.

What am I doing wrong?

Thank you all,

First, the target is Dell OptiPlex 990.

Here is my confusion: I installed the trunk svn from the link that is on wiki. When checking fog configuration it states:
You are currently running version: 6098
Latest stable version is 1.2.0
Latest svn version is 4754
Latest git version is 6179

if I installed the svn version, should it say 4754?

I tried the SVN UP command (found on wiki), and I did not get upgraded.

Can someone please can clarify this and provide instructions how to upgrade?

Thanks,

Tom

@george1421Thank you, it shows 6098, I will try to upgrade

Hello all,

SVN 6098/Ubuntu 14.4 LTS (64 bit)

Just completed the setup. When trying to preform quick registration, received "Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(1,0).

From what I’ve read here, it seems that I need to change to 64 bit kernel. I also saw an article from Tom Elliott, but I am not sure if that kernel compatible with my FOG version.
https://wiki.fogproject.org/wiki/index.php/Build_TomElliott_Kernel

Any help, clarification and solutions will be greatly appreciated.

Thank you,

Tom

@Wayne-Workman So, I have decided to start fresh, I installed Ubuntu 14.04.3 and fog 1.2.0 ( It was my understanding that the trunk is beta version).
My issue now is that the host is not booting to PXE.
Set correctly opt 66 and 67 (undionly.kpxe) and tried to work with dnsmasq, but I cannot figure this out.
I can get to the management console via IE over the network.
Should I start a new thread?

Thanks,

Tom

@george1421 Thank you for the advice. My knowledge about Ubuntu and FOG is very basic. Can you provide more info (step by step would be great) how to accomplish this?

Thank you very much,

Tom

@Wayne-Workman Thank you, I went through the troubleshooting steps and could not figure out what’s wrong.
I’m going to revert back and start over.
Does anyone have instructions on how to do it and what to look for?
Is there anything I should do pre and post upgrade?

Thanks,

Tom

@Thiago Thank for the advice, Unfortunately, it did not help. I’m a bit frustrated.
Since it’s VM, I’m ready to revert back and try this upgrade again.

Hello,

Completed in place upgrade fog on Ubuntu.
Fog version 0.31 on Ubuntu 10.11 to fog 1.2.0 on Ubuntu 12.04
All seems to run ok with no issues.
When trying to update the database schema it fails.0_1453211200571_Errors.pdf

Attached the log as pdf.

I tried suggestions that I found here, but the issue was not resolved for me.

Thank you in advance,

Tom

THANK YOU VERY MUCH.
I was able to register the laptop. Now I have to test uploading the image.

Thanks again,

Tom

[ATTACH=full]555[/ATTACH] Hi all,

Fog Ver 0.31
Kernel Ver 3.8.8.core

I am trying to register the machine with fog in order to upload an image.
Once the proccess starts, it stops - Please take a look at the screenshot.

I tried to use the “all-net” kernel, but that did not resolve the issue.

Please help.

Thanks,

Tom

[url=“/_imported_xf_attachments/0/555_20140220_131743.jpg?:”]20140220_131743.jpg[/url]

Sid,

In the fog settings, there is Capone setting section.
Set the:
[SIZE=13px][FONT=Ubuntu][COLOR=#333333]FOG_PLUGIN_CAPONE_DMI to system-product-name

Hope it helps,

Tom[/COLOR][/FONT][/SIZE]

Capone hangs when matching DMI also with version 0.31

I’m surprised that Capone is working with 0.32 version, mine hangs when matching DMI.

I have the same problem.
I hope someone will post a solution soon.

Thank you

Tom