Posts made by Pascal Gazaille

@Sebastian-Roth

cat /images/<image-name>/d1.fixed_size_partitions = 1
cat /images/<image-name>/d1.minimum.partitions = not working
cat /images/<image-name>/d1.partitions = not working

@Sebastian-Roth Hi, I’ trying your commands and none of them works…I’m I missing something? I started the computer in “deploy - debug” like all other debug.

@Wayne-Workman We already had an image with multiple partition image - all disk (not resizable) in our fog and yes this image has worked on the new HDD

@Wayne-Workman Tried imaging the hdd with a multiple partition image - all disk (not resizable) we use for our laptops and it’s working…

@Wayne-Workman I’ve searched everywhere but did not find any firmware update or downgrade…

@Wayne-Workman

@Sebastian-Roth Can I change the image type without reuploading the image?
All my images are single disk -resizable.

@Sebastian-Roth both of the disk have the same information except for the disk identifier.
In the bios we keep the disk settings to AHCI

Here is the new disk :

Here is the old one :

@Wayne-Workman Tried the normal wipe and reimagine the computer, same result

@Sebastian-Roth

ID_FS_TYPE=ntfs

That’s the result for both you asked

@Wayne-Workman Do you know how long it’s supposed to take for the normal wipe, I started it as soon as you asked me and it’s still not finish…

@Wayne-Workman I had a usb key to copy all the text you asked me

NAME   MAJ:MIN RM   SIZE RO TYPE MOUNTPOINT
sda      8:0    0 465.8G  0 disk 
|-sda1   8:1    0   100M  0 part 
`-sda2   8:2    0 465.7G  0 part 
sdb      8:16   1  14.4G  0 disk 
`-sdb1   8:17   1  14.4G  0 part /media

Disk /dev/sda: 465.8 GiB, 500107862016 bytes, 976773168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: gpt
Disk identifier: 5D0B0767-C0CA-4598-A861-390C27BA83FE

Device      Start       End   Sectors   Size Type
/dev/sda1    2048    206847    204800   100M PowerPC PReP boot
/dev/sda2  206848 976771071 976564224 465.7G PowerPC PReP boot


Disk /dev/sdb: 14.4 GiB, 15502147584 bytes, 30277632 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x911e8a3c

Device     Boot Start      End  Sectors  Size Id Type
/dev/sdb1  *     8064 30277631 30269568 14.4G  c W95 FAT32 (LBA)

@george1421 We’ve install win7 from scratch and it works, but when trying to image after the download the screen stays black or writes drive not found.

When we plug the hdd in another computer, we see the hdd with all the partition but it takes no letter.

@sudburr I’ve check on every website for firmware update, nothing…

@Wayne-Workman Yes, my image is single disk - resizable

@Wayne-Workman Just dit and everything is Ok, seems to be the hdd in the new ones that have the problem

ST500DM002-1SB10A - Black screen after fog
ST500DM002-1BD142 - Works fine

@Wayne-Workman I did update to the latest svn version, but dont think it’s the problem…
Maybe there’s something different in the optiplex 3020 we received lately compare to the other one’s we had.
On every DELL we have we disable secure boot and put it in legacy mode to boot on hdd.

Hi all,
Everything was working well lately, but we have juste received a new batch of computer model Dell Optiplex 3020. We were able to deploy fog image on them before but not anymore.

We are on fog svn 7386, I’ve update the kernel to the latest 4.5.1.

The computer is able to do a full registration with no problem. After that I do a quick image and still everything is ok. The process does all what it’s supposed to do, by that I mean download and at the first restart I see a black screen and nothing else.

Tried other image (That work on other computers) and still have a black screen with nothing else.

@Sebastian-Roth ok thanks, we have undionly.kpxe