Posts made by Pascal Gazaille

@Wayne-Workman @Tom-Elliott Just wanted to thank you guys, great support for a great product!

@Wayne-Workman Once the multicast job is done, is it supposed to disapear from the DB ‘multicastSessions’?

@Wayne-Workman Hey sorry for the delay, I did what you wanted and tried to multicast 4 laptops this morning, it seems to work!

I’m gonna tried with more computer later today!

@Wayne-Workman Hi, I’ve changed the setting fog_udpcast_maxwait to 4, tried to multicast 4 laptops and nothing after 30 min.

@Pascal-Gazaille Update : My first test was with one laptop on a multicast job, it took nearly 30 minutes on the partclone screen before the task began.

Tried another multicast this time with 10 laptops, still waiting for the task to begin after 1 hour…

@Tom-Elliott Tried what you said and still the same problem, still on the partclone screen and nothing happens…

[08-08-16 3:45:05 pm] | Task (1382) Multi-Cast Task is new!
[08-08-16 3:45:05 pm] | Task (1382) Multi-Cast Task has been cleaned.
[08-08-16 3:45:05 pm] | Task (1382) /images/PriSec64 image file found.
[08-08-16 3:45:05 pm] | Task (1382) 11 client(s) found or to receive.
[08-08-16 3:45:05 pm] | Task (1382) Multi-Cast Task sending on base port: 65276
[08-08-16 3:45:05 pm] | CMD: cat /images/PriSec64/d1p1.img | /usr/local/sbin/udp-sender --interface eth0 --min-receivers 11 --max-wait 600 --portbase 65276 --full-duplex --ttl 32 --nokbd --nopointopoint;cat /images/PriSec64/d1p2.img | /usr/local/sbin/udp-sender --interface eth0 --min-receivers 11 --max-wait 10 --portbase 65276 --full-duplex --ttl 32 --nokbd --nopointopoint;
[08-08-16 3:45:05 pm] | Task (1382) Multi-Cast Task has started.
[08-08-16 3:45:05 pm] | Task (773) YannickF is new!
[08-08-16 3:45:05 pm] | Task (773) YannickF failed to start!
[08-08-16 3:45:05 pm] | * Don't panic, check all your settings!
[08-08-16 3:45:06 pm] | even if the interface is incorrect the task won't start.
[08-08-16 3:45:06 pm] | If all else fails run the following command and see what it says:
[08-08-16 3:45:06 pm] | 
[08-08-16 3:45:06 pm] Task (%s) %s has been cleaned.
[08-08-16 3:45:06 pm] | Task (776) YannickF is new!
[08-08-16 3:45:06 pm] | Task (776) YannickF failed to start!
[08-08-16 3:45:06 pm] | * Don't panic, check all your settings!
[08-08-16 3:45:06 pm] | even if the interface is incorrect the task won't start.
[08-08-16 3:45:06 pm] | If all else fails run the following command and see what it says:
[08-08-16 3:45:06 pm] | 
[08-08-16 3:45:06 pm] Task (%s) %s has been cleaned.
[08-08-16 3:45:16 pm] | Task (775) cg1 is new!
[08-08-16 3:45:16 pm] | Task (775) cg1 failed to start!
[08-08-16 3:45:16 pm] | * Don't panic, check all your settings!
[08-08-16 3:45:16 pm] | even if the interface is incorrect the task won't start.
[08-08-16 3:45:16 pm] | If all else fails run the following command and see what it says:
[08-08-16 3:45:16 pm] | 
[08-08-16 3:45:16 pm] Task (%s) %s has been cleaned.
[08-08-16 3:45:16 pm] | Task (1382) Multi-Cast Task is no longer running.
[08-08-16 3:45:16 pm] | Task (1382) Multi-Cast Task has been cancelled.
[08-08-16 3:45:17 pm] | Task (773) YannickF is new!
[08-08-16 3:45:17 pm] | Task (773) YannickF failed to start!
[08-08-16 3:45:17 pm] | * Don't panic, check all your settings!
[08-08-16 3:45:17 pm] | even if the interface is incorrect the task won't start.
[08-08-16 3:45:17 pm] | If all else fails run the following command and see what it says:
[08-08-16 3:45:17 pm] | 
[08-08-16 3:45:17 pm] Task (%s) %s has been cleaned.
[08-08-16 3:45:17 pm] | Task (776) YannickF is new!
[08-08-16 3:45:17 pm] | Task (776) YannickF failed to start!
[08-08-16 3:45:17 pm] | * Don't panic, check all your settings!
[08-08-16 3:45:17 pm] | even if the interface is incorrect the task won't start.
[08-08-16 3:45:17 pm] | If all else fails run the following command and see what it says:
[08-08-16 3:45:17 pm] | 
[08-08-16 3:45:17 pm] Task (%s) %s has been cleaned.
[08-08-16 3:45:27 pm] | Task (775) cg1 is new!
[08-08-16 3:45:27 pm] | Task (775) cg1 failed to start!
[08-08-16 3:45:27 pm] | * Don't panic, check all your settings!
[08-08-16 3:45:27 pm] | even if the interface is incorrect the task won't start.
[08-08-16 3:45:27 pm] | If all else fails run the following command and see what it says:
[08-08-16 3:45:28 pm] | 
[08-08-16 3:45:28 pm] Task (%s) %s has been cleaned.
[08-08-16 3:45:28 pm] | Task (1382) Multi-Cast Task is new!
[08-08-16 3:45:28 pm] | Task (1382) Multi-Cast Task has been cleaned.
[08-08-16 3:45:28 pm] | Task (1382) /images/PriSec64 image file found.
[08-08-16 3:45:28 pm] | Task (1382) 11 client(s) found or to receive.
[08-08-16 3:45:28 pm] | Task (1382) Multi-Cast Task sending on base port: 65276
[08-08-16 3:45:28 pm] | CMD: cat /images/PriSec64/d1p1.img | /usr/local/sbin/udp-sender --interface eth0 --min-receivers 11 --max-wait 600 --portbase 65276 --full-duplex --ttl 32 --nokbd --nopointopoint;cat /images/PriSec64/d1p2.img | /usr/local/sbin/udp-sender --interface eth0 --min-receivers 11 --max-wait 10 --portbase 65276 --full-duplex --ttl 32 --nokbd --nopointopoint;
[08-08-16 3:45:28 pm] | Task (1382) Multi-Cast Task has started.
[08-08-16 3:45:28 pm] | Task (773) YannickF is new!
[08-08-16 3:45:28 pm] | Task (773) YannickF failed to start!
[08-08-16 3:45:28 pm] | * Don't panic, check all your settings!
[08-08-16 3:45:28 pm] | even if the interface is incorrect the task won't start.
[08-08-16 3:45:28 pm] | If all else fails run the following command and see what it says:
[08-08-16 3:45:28 pm] | 
[08-08-16 3:45:28 pm] Task (%s) %s has been cleaned.
[08-08-16 3:45:28 pm] | Task (776) YannickF is new!
[08-08-16 3:45:28 pm] | Task (776) YannickF failed to start!
[08-08-16 3:45:28 pm] | * Don't panic, check all your settings!
[08-08-16 3:45:28 pm] | even if the interface is incorrect the task won't start.
[08-08-16 3:45:29 pm] | If all else fails run the following command and see what it says:
[08-08-16 3:45:29 pm] | 
[08-08-16 3:45:29 pm] Task (%s) %s has been cleaned.
[08-08-16 3:45:39 pm] | Task (775) cg1 is new!
[08-08-16 3:45:39 pm] | Task (775) cg1 failed to start!
[08-08-16 3:45:39 pm] | * Don't panic, check all your settings!
[08-08-16 3:45:39 pm] | even if the interface is incorrect the task won't start.
[08-08-16 3:45:39 pm] | If all else fails run the following command and see what it says:
[08-08-16 3:45:39 pm] | 
[08-08-16 3:45:39 pm] Task (%s) %s has been cleaned.
[08-08-16 3:45:39 pm] | Task (1382) Multi-Cast Task is no longer running.
[08-08-16 3:45:39 pm] | Task (1382) Multi-Cast Task has been cancelled.
[08-08-16 3:45:39 pm] | Task (773) YannickF is new!
[08-08-16 3:45:39 pm] | Task (773) YannickF failed to start!
[08-08-16 3:45:39 pm] | * Don't panic, check all your settings!
[08-08-16 3:45:39 pm] | even if the interface is incorrect the task won't start.
[08-08-16 3:45:39 pm] | If all else fails run the following command and see what it says:
[08-08-16 3:45:39 pm] | 
[08-08-16 3:45:40 pm] Task (%s) %s has been cleaned.
[08-08-16 3:45:40 pm] | Task (776) YannickF is new!
[08-08-16 3:45:40 pm] | Task (776) YannickF failed to start!
[08-08-16 3:45:40 pm] | * Don't panic, check all your settings!
[08-08-16 3:45:40 pm] | even if the interface is incorrect the task won't start.
[08-08-16 3:45:40 pm] | If all else fails run the following command and see what it says:
[08-08-16 3:45:40 pm] | 
[08-08-16 3:45:40 pm] Task (%s) %s has been cleaned.```

Hey guys,
I’m trying multicast and nothing will work. All the laptops are stuck on the partclone screen and nothing start.

Setup :
Ubuntu 14.04.5 LTS
Running Version 1.3.0-RC-7
SVN Revision: 5946

any idea?

@Tom-Elliott Tried the ipxe.pxe settings and it’s working, gonna try on some of my other models.
Thank you!

@Tom-Elliott What’s the difference? and can this cause problem with all my other models of pc and laptops?

Hi there,
I’m trying to fog some HP Pavilion x360 for the first time in our fog and it doesn’t work. It seems to be taking an IP for the DHCP and after that it look likes a timeout for the Pxe.

This is what I get when trying.

My system :
Ubuntu 14.04.4 LTS
svn : 8540

@Tom-Elliott Should I remove the evasive mod too?

@Wayne-Workman ufw status result

WARN: Duplicate profile 'Apache' , using last found
WARN: Duplicate profile 'Apache Secure' , using last found
WARN: Duplicate profile 'Apache FULL' , using last found
Status: inactive

I’ve update to svn 8132, rebooted the server and now it seems to work…

@Tom-Elliott I’ve changed the setting and restarted the multicast service.

Tried again and here’s the new error :

[Wed Jun 15 15:42:09.915135 2016] [evasive20:error] [pid 8701] [client 10.6.2.102:51557] client denied by server configuration: /var/www/html/fog/status/getfiles.php```

Hi,
My multicast is not working anymore. I updated to svn 8105 on Ubuntu 14.04.4 LTS. Here is a printscreen of my errorlog.

Version 8088
Ubuntu 14.04.4 LTS

The only way I’ve found is to export the list of group and search the exact group name one by one to delete them…

Hey!
Is there a way to delete all the groups from fog?
I wan’t to keep all the hosts but delete my groups. When I tried via the web interface I have “Search failedInternal Server Error”. So can’t display and delete them.

Thanks!

@Sebastian-Roth Hey, I’ve tried to copy the d1.mbr files but this didn’t work, don’t know if there where a right issue. Seing that my MBR files was not there, I’ve tried to reupload my 2 images that had the problem and now everything seems ok.

Don’t know why the d1.mbr file disapeared from these 2 images on the first place.

Thanks alot for all the debug, you guys are a great team!

@Sebastian-Roth the problem comes with image single disk -resizable…

@Sebastian-Roth