@Wayne-Workman

Found my problem, the cache of my browser had a problem.

Reset settings and everything is ok!

@Tom-Elliott Tried the ipxe.pxe settings and it’s working, gonna try on some of my other models.
Thank you!

@Sebastian-Roth Here you go, hope that’s what you want :

@Sebastian-Roth For a quick test, I’ve put this argument “pci=noacpi” and my fog started… do you still need the result of the “cat /proc/interrupts”?

@Sebastian-Roth ok thanks, we have undionly.kpxe

@Wayne-Workman @Tom-Elliott Just wanted to thank you guys, great support for a great product!

@Wayne-Workman Once the multicast job is done, is it supposed to disapear from the DB ‘multicastSessions’?

@Wayne-Workman Hey sorry for the delay, I did what you wanted and tried to multicast 4 laptops this morning, it seems to work!

I’m gonna tried with more computer later today!

@Wayne-Workman Hi, I’ve changed the setting fog_udpcast_maxwait to 4, tried to multicast 4 laptops and nothing after 30 min.

@Pascal-Gazaille Update : My first test was with one laptop on a multicast job, it took nearly 30 minutes on the partclone screen before the task began.

Tried another multicast this time with 10 laptops, still waiting for the task to begin after 1 hour…

@Tom-Elliott Tried what you said and still the same problem, still on the partclone screen and nothing happens…

[08-08-16 3:45:05 pm] | Task (1382) Multi-Cast Task is new!
[08-08-16 3:45:05 pm] | Task (1382) Multi-Cast Task has been cleaned.
[08-08-16 3:45:05 pm] | Task (1382) /images/PriSec64 image file found.
[08-08-16 3:45:05 pm] | Task (1382) 11 client(s) found or to receive.
[08-08-16 3:45:05 pm] | Task (1382) Multi-Cast Task sending on base port: 65276
[08-08-16 3:45:05 pm] | CMD: cat /images/PriSec64/d1p1.img | /usr/local/sbin/udp-sender --interface eth0 --min-receivers 11 --max-wait 600 --portbase 65276 --full-duplex --ttl 32 --nokbd --nopointopoint;cat /images/PriSec64/d1p2.img | /usr/local/sbin/udp-sender --interface eth0 --min-receivers 11 --max-wait 10 --portbase 65276 --full-duplex --ttl 32 --nokbd --nopointopoint;
[08-08-16 3:45:05 pm] | Task (1382) Multi-Cast Task has started.
[08-08-16 3:45:05 pm] | Task (773) YannickF is new!
[08-08-16 3:45:05 pm] | Task (773) YannickF failed to start!
[08-08-16 3:45:05 pm] | * Don't panic, check all your settings!
[08-08-16 3:45:06 pm] | even if the interface is incorrect the task won't start.
[08-08-16 3:45:06 pm] | If all else fails run the following command and see what it says:
[08-08-16 3:45:06 pm] | 
[08-08-16 3:45:06 pm] Task (%s) %s has been cleaned.
[08-08-16 3:45:06 pm] | Task (776) YannickF is new!
[08-08-16 3:45:06 pm] | Task (776) YannickF failed to start!
[08-08-16 3:45:06 pm] | * Don't panic, check all your settings!
[08-08-16 3:45:06 pm] | even if the interface is incorrect the task won't start.
[08-08-16 3:45:06 pm] | If all else fails run the following command and see what it says:
[08-08-16 3:45:06 pm] | 
[08-08-16 3:45:06 pm] Task (%s) %s has been cleaned.
[08-08-16 3:45:16 pm] | Task (775) cg1 is new!
[08-08-16 3:45:16 pm] | Task (775) cg1 failed to start!
[08-08-16 3:45:16 pm] | * Don't panic, check all your settings!
[08-08-16 3:45:16 pm] | even if the interface is incorrect the task won't start.
[08-08-16 3:45:16 pm] | If all else fails run the following command and see what it says:
[08-08-16 3:45:16 pm] | 
[08-08-16 3:45:16 pm] Task (%s) %s has been cleaned.
[08-08-16 3:45:16 pm] | Task (1382) Multi-Cast Task is no longer running.
[08-08-16 3:45:16 pm] | Task (1382) Multi-Cast Task has been cancelled.
[08-08-16 3:45:17 pm] | Task (773) YannickF is new!
[08-08-16 3:45:17 pm] | Task (773) YannickF failed to start!
[08-08-16 3:45:17 pm] | * Don't panic, check all your settings!
[08-08-16 3:45:17 pm] | even if the interface is incorrect the task won't start.
[08-08-16 3:45:17 pm] | If all else fails run the following command and see what it says:
[08-08-16 3:45:17 pm] | 
[08-08-16 3:45:17 pm] Task (%s) %s has been cleaned.
[08-08-16 3:45:17 pm] | Task (776) YannickF is new!
[08-08-16 3:45:17 pm] | Task (776) YannickF failed to start!
[08-08-16 3:45:17 pm] | * Don't panic, check all your settings!
[08-08-16 3:45:17 pm] | even if the interface is incorrect the task won't start.
[08-08-16 3:45:17 pm] | If all else fails run the following command and see what it says:
[08-08-16 3:45:17 pm] | 
[08-08-16 3:45:17 pm] Task (%s) %s has been cleaned.
[08-08-16 3:45:27 pm] | Task (775) cg1 is new!
[08-08-16 3:45:27 pm] | Task (775) cg1 failed to start!
[08-08-16 3:45:27 pm] | * Don't panic, check all your settings!
[08-08-16 3:45:27 pm] | even if the interface is incorrect the task won't start.
[08-08-16 3:45:27 pm] | If all else fails run the following command and see what it says:
[08-08-16 3:45:28 pm] | 
[08-08-16 3:45:28 pm] Task (%s) %s has been cleaned.
[08-08-16 3:45:28 pm] | Task (1382) Multi-Cast Task is new!
[08-08-16 3:45:28 pm] | Task (1382) Multi-Cast Task has been cleaned.
[08-08-16 3:45:28 pm] | Task (1382) /images/PriSec64 image file found.
[08-08-16 3:45:28 pm] | Task (1382) 11 client(s) found or to receive.
[08-08-16 3:45:28 pm] | Task (1382) Multi-Cast Task sending on base port: 65276
[08-08-16 3:45:28 pm] | CMD: cat /images/PriSec64/d1p1.img | /usr/local/sbin/udp-sender --interface eth0 --min-receivers 11 --max-wait 600 --portbase 65276 --full-duplex --ttl 32 --nokbd --nopointopoint;cat /images/PriSec64/d1p2.img | /usr/local/sbin/udp-sender --interface eth0 --min-receivers 11 --max-wait 10 --portbase 65276 --full-duplex --ttl 32 --nokbd --nopointopoint;
[08-08-16 3:45:28 pm] | Task (1382) Multi-Cast Task has started.
[08-08-16 3:45:28 pm] | Task (773) YannickF is new!
[08-08-16 3:45:28 pm] | Task (773) YannickF failed to start!
[08-08-16 3:45:28 pm] | * Don't panic, check all your settings!
[08-08-16 3:45:28 pm] | even if the interface is incorrect the task won't start.
[08-08-16 3:45:28 pm] | If all else fails run the following command and see what it says:
[08-08-16 3:45:28 pm] | 
[08-08-16 3:45:28 pm] Task (%s) %s has been cleaned.
[08-08-16 3:45:28 pm] | Task (776) YannickF is new!
[08-08-16 3:45:28 pm] | Task (776) YannickF failed to start!
[08-08-16 3:45:28 pm] | * Don't panic, check all your settings!
[08-08-16 3:45:28 pm] | even if the interface is incorrect the task won't start.
[08-08-16 3:45:29 pm] | If all else fails run the following command and see what it says:
[08-08-16 3:45:29 pm] | 
[08-08-16 3:45:29 pm] Task (%s) %s has been cleaned.
[08-08-16 3:45:39 pm] | Task (775) cg1 is new!
[08-08-16 3:45:39 pm] | Task (775) cg1 failed to start!
[08-08-16 3:45:39 pm] | * Don't panic, check all your settings!
[08-08-16 3:45:39 pm] | even if the interface is incorrect the task won't start.
[08-08-16 3:45:39 pm] | If all else fails run the following command and see what it says:
[08-08-16 3:45:39 pm] | 
[08-08-16 3:45:39 pm] Task (%s) %s has been cleaned.
[08-08-16 3:45:39 pm] | Task (1382) Multi-Cast Task is no longer running.
[08-08-16 3:45:39 pm] | Task (1382) Multi-Cast Task has been cancelled.
[08-08-16 3:45:39 pm] | Task (773) YannickF is new!
[08-08-16 3:45:39 pm] | Task (773) YannickF failed to start!
[08-08-16 3:45:39 pm] | * Don't panic, check all your settings!
[08-08-16 3:45:39 pm] | even if the interface is incorrect the task won't start.
[08-08-16 3:45:39 pm] | If all else fails run the following command and see what it says:
[08-08-16 3:45:39 pm] | 
[08-08-16 3:45:40 pm] Task (%s) %s has been cleaned.
[08-08-16 3:45:40 pm] | Task (776) YannickF is new!
[08-08-16 3:45:40 pm] | Task (776) YannickF failed to start!
[08-08-16 3:45:40 pm] | * Don't panic, check all your settings!
[08-08-16 3:45:40 pm] | even if the interface is incorrect the task won't start.
[08-08-16 3:45:40 pm] | If all else fails run the following command and see what it says:
[08-08-16 3:45:40 pm] | 
[08-08-16 3:45:40 pm] Task (%s) %s has been cleaned.```

Hey guys,
I’m trying multicast and nothing will work. All the laptops are stuck on the partclone screen and nothing start.

Setup :
Ubuntu 14.04.5 LTS
Running Version 1.3.0-RC-7
SVN Revision: 5946

any idea?

@Tom-Elliott Tried the ipxe.pxe settings and it’s working, gonna try on some of my other models.
Thank you!

@Tom-Elliott What’s the difference? and can this cause problem with all my other models of pc and laptops?