@mrzo For the record - my organization has had a whole lot of problems with the Lenovo M72e. And when I say problems - they are (currently) absolutely not working with FOG Trunk.

The strange thing is - the 30 or so that we tried every method in the book with - one of them always succeeded while every single other one always failed… we have sat down and compared Firmware settings, we’ve restored firmware defaults… we can’t figure it out, it’s a mystery at the moment. We are currently using WDS and/or Norton Ghost for that particular lab.

We have no M83 models in our environment - but I wanted to just shed a little light on my experience with Lenovo. I think some of their other models don’t quite like San-Boot style HDD exits either… Lenovo is… a PITA.

AHCI is the preferred operating mode, it’s a best-case scenario that you have a mechanical drive.
You say that the system is configured to boot via UEFI ? What boot file are you using? Have you tried others?

Just trying to get updated information. I’m assuming most or all of things described as problems have been fixed. Is this true? Can we solve this thread?

@Wayne-Workman didnt testet it thoroughly, but as I described it, it didnt work, (I made sym link /image - so no change in exports was needed?) , permissions and files created were ok - after changed exports to new location, everything startet to work.

[quote=“Tom Elliott, post: 45876, member: 7271”]Can you try 3279?[/quote]
I installed 3279 and at least the error didn’t reappeared. Can’t tell if it fixed it as I fixed it with enabling mcrypt odule as I wrote before…

Problem was with the available free space (it was combination of virtual disk setup and linux installation). Creating my first image now, seems ok so far. Thanks you all for pointing me to right direction.