@AUTH-IT-Center Hi thanks for the reply.

Yes I’ve read that link, my problem is that I’ve done the password migrations “backwards” - ie I’ve copied the passwords from the database to .fogsettings instead of the other way around as specified on that link.

@AUTH-IT-Center Thank you. I didn’t find that article but it has what I need.

@george1421 This seems positive, looks like we may have a working solution by the end of the year. Unfortunately as the laptops we are testing this on are the CEO’s and CTO’s new ones, I will not be able to keep hold of them much longer and so they will be unavailable for testing in 2 weeks time. I will keep following the progress of this forum but wont be able to lend a hand to testing.

@Tom-Elliott Apologies, I don’t know what went wrong there but somehow I got an incomplete version of your changes. git is a confusing beast to me :). I’ve now checked again that I’m running dev-branch and I can confirm that all the warnings have gone.

Thanks again.

@greg-plamondon Yes, I never enable that nonsense 🙂

@markg said in SSH login while imaging:

I’ve no problem with them all having the same password so that was really easy

Just understand that the password you set will not be persistent in that once FOS Linux reboots it will go back to its default password since FOS Linux itself is not persistent or has any persistent storage. You can surely do what you need with a post init script. We also use post init scripts to setup specific hardware/software combinations like software raid solutions and such before imaging can begin.

@pep said in Using a separate NIC for multicast:

web = http: //192.168.1.100/fog/ ftp = 192.168.1.100 storage = 192.168.1.100: / images / dev / storageip = 192.168.1.100

Thanks! That works. I can leave my storage settings as default and Multticast will use eno2, then for anything not multicast I can set the correct parameters for eno3.

Just a note that for deployment the storage variable needs to be ip.address:/images/ (without the dev/)

@george1421 Thanks for the help … ohh Apple… on booting to the debug kernel I’m asked to ‘press Enter to continue’. However, it appears that as well no driver for the nvme, there’s also no driver for the keyboard. So, locating a USB keyboard I was able to determine the following:

[Wed Apr 03 root@fogclient ~]# lsblk NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT sda 8:0 1 1.9G 0 disk `-sda1 8:1 1 121M 0 part [Wed Apr 03 root@fogclient ~]# lspci -nn 00:00.0 Host bridge [0600]: Intel Corporation Device [8086:3ec4] (rev 07) 00:01.0 PCI bridge [0604]: Intel Corporation Skylake PCIe Controller (x16) [8086:1901] (rev 07) 00:01.1 PCI bridge [0604]: Intel Corporation Skylake PCIe Controller (x8) [8086:1905] (rev 07) 00:01.2 PCI bridge [0604]: Intel Corporation Skylake PCIe Controller (x4) [8086:1909] (rev 07) 00:12.0 Signal processing controller [1180]: Intel Corporation Device [8086:a379] (rev 10) 00:14.0 USB controller [0c03]: Intel Corporation Device [8086:a36d] (rev 10) 00:14.2 RAM memory [0500]: Intel Corporation Device [8086:a36f] (rev 10) 00:16.0 Communication controller [0780]: Intel Corporation Device [8086:a360] (rev 10) 00:1b.0 PCI bridge [0604]: Intel Corporation Device [8086:a340] (rev f0) 00:1c.0 PCI bridge [0604]: Intel Corporation Device [8086:a338] (rev f0) 00:1e.0 Communication controller [0780]: Intel Corporation Device [8086:a328] (rev 10) 00:1f.0 ISA bridge [0601]: Intel Corporation Device [8086:a313] (rev 10) 00:1f.4 SMBus [0c05]: Intel Corporation Device [8086:a323] (rev 10) 00:1f.5 Serial bus controller [0c80]: Intel Corporation Device [8086:a324] (rev 10) 01:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] Baffin [Radeon RX 460] [1002:67ef] (rev e3) 01:00.1 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] Device [1002:aae0] 02:00.0 Mass storage controller [0180]: Apple Inc. Device [106b:2005] (rev 01) 02:00.1 Non-VGA unclassified device [0000]: Apple Inc. Device [106b:1801] (rev 01) 02:00.2 Non-VGA unclassified device [0000]: Apple Inc. Device [106b:1802] (rev 01) 02:00.3 Multimedia audio controller [0401]: Apple Inc. Device [106b:1803] (rev 01) 03:00.0 Network controller [0280]: Broadcom Limited Device [14e4:4464] (rev 03) 04:00.0 PCI bridge [0604]: Intel Corporation DSL6540 Thunderbolt 3 Bridge [Alpine Ridge 4C 2015] [8086:1578] (rev 06) 05:00.0 PCI bridge [0604]: Intel Corporation Device [8086:15ea] (rev 06) 05:01.0 PCI bridge [0604]: Intel Corporation Device [8086:15ea] (rev 06) 05:02.0 PCI bridge [0604]: Intel Corporation Device [8086:15ea] (rev 06) 05:04.0 PCI bridge [0604]: Intel Corporation Device [8086:15ea] (rev 06) 06:00.0 System peripheral [0880]: Intel Corporation Device [8086:15eb] (rev 06) 07:00.0 USB controller [0c03]: Intel Corporation Device [8086:15ec] (rev 06) 7a:00.0 PCI bridge [0604]: Intel Corporation DSL6540 Thunderbolt 3 Bridge [Alpine Ridge 4C 2015] [8086:1578] (rev 06) 7b:00.0 PCI bridge [0604]: Intel Corporation Device [8086:15ea] (rev 06) 7b:01.0 PCI bridge [0604]: Intel Corporation Device [8086:15ea] (rev 06) 7b:02.0 PCI bridge [0604]: Intel Corporation Device [8086:15ea] (rev 06) 7b:04.0 PCI bridge [0604]: Intel Corporation Device [8086:15ea] (rev 06) 7c:00.0 System peripheral [0880]: Intel Corporation Device [8086:15eb] (rev 06) 7d:00.0 USB controller [0c03]: Intel Corporation Device [8086:15ec] (rev 06)

@MarkG said in Image files and Snapin files not deleted:

Bug in 1.5.0?

Possibly. 1.5.0 is long away and I don’t have all the changes in the back of my mind… 😉

So updating to the latest will fix the issue, that’s good!