When I add a PC via Full registration and Inventory with imaging and enter the credentials, I get an error: “Attempting to register host… Done, Without imaging! Invalid Login!” The credentials are correct. The server has just been installed. Version 1.5.10.17.34. To deploy an image, I have to restart the PC and, using PXE, deploy the image. That works.

Linux debian 12
Fog 1.5.101639

Hi,

When I try to do a Full Inventory and Deployement I have a Message With :
Attemting to register host … Done, Whitout imaging! Invalid Login!

The login is correct.

Thanks !

Bonjour,

quel est le serveur dhcp ?

Problem solved !

Thanks a lot !!

fog version : 1.5.9
Debian 10

Hi,
I can’t login to the webui anymore. I try to reset the WebUI password (UPDATE users SET uPass = MD5(‘password’) WHERE uName = ‘fog’;) but i have this message :
Rows matched: 0 Changed: 0 Warnings: 0

If i try this command select * from users; i have
Empty set (0.000 sec)
So do i have to create a user ? and how ?

Thanks

@kfritland

You can find silent switch with this :

http://www.capstanservices.com/tools-blog/2018/4/4/the-ultimate-silent-switch-finder-ussf

ok i find TASKING ADV SHUTDOWN ENABLED i will try

thanks !!!

if you can help me with plan B it will be great !

Thanks a lot !!

Hi

is it possible to add Deploy and shutdown in ipxe menu ?

Thanks !

@george1421

Dell change the motherboard with lan integrated and it works now.

We try with another computer, same model and it works !

Thanks a lot for your help

@davido38

@davido38

The target computer remote is in the same switch than the fog server and the dhcp server. No special configuration for the MTU.

x.x.121.x and x.x.120.x with a subnet mask of /23 are on the same subnet.

Hi,

Fog 1.5.9
Debian 10
Windows 2012 dhcp

Legacy boot is ok
Uefi boot is

here a tcpdump :

output.pcap

It works great !

Thanks a lot !

I would like to change this :

Would you like this host to join a domain ? => yes

Would you like to deploy image to this computer now? (y/N) => yes

Thanks

Fog version 1.5.9
Debian 10

Hi

Is it possible to change the default answer of the “Perform Full Host Registration and Inventory” and how ?

Thanks.

Debian 9
Fog 1.5.7.2

After update fog from 1.5.6 to 1.5.7 i have kernel panic - not syncing : VFS… on Dell 5055 and 3040

if i restore int and bzimage from 1.5.6 everything is fine.

Dav.

@Jonathan-Cool
As-tu essayé de modifier la clef de registre windows 10

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa

LmCompatibilityLevel avec une valeur 1 ou 5 ?

Hi,

is the smb1 protocol enabled on windows 10 ?

by default it is not.

Uninstall selected is greyed, if i click on it i have plugin install success popup

and the plugin is still installed