FOG 1.3 and old clients
-
Hello,
i just updated my fog server to 1.3.
Today i had to image an old pc with old client (0.9.12) installed. (client present into the image)
Then i activated hostname changer (active directory settings) but nothing happened.
I had to manually upgrade client version. (0.11.5)
After that hostname changer worked fine.Is it normal ?
Does that means fog 1.3 is not compatible with old client version ?
Is there a way to upgrade all client automatically? -
I had this issue, i had to upgrade 0.9.12 to 11.5.
I ran a gpo to upgrade the client.
Used orca to edit the msi file and add the ip address of my fog server. Then created GPO for installing software and selected the MSI.
The client updates, but needs a reboot for the services to startup.
Also had to update my images to include the new client.
Hope this helps
FOG with sysprep: https://wiki.fogproject.org/wiki/index.php?title=FOG_Client
-
@Duncan said in FOG 1.3 and old clients:
Hope this helps
It’s just the exact answer to my question !!!
For information :
https://wiki.fogproject.org/wiki/index.php?title=FOG_Client#FOG_Client_0.10.0.2B_Installation_Options -
@Duncan
Do you think the solution could be to use Snapins to install new version of the client from 0.9.12 to 0.11.5 ?
As this page show SmartInstaller Switches
https://wiki.fogproject.org/wiki/index.php?title=FOG_Client#FOG_Client_0.10.0.2B_Installation_Options -
@plegrand
0.9.12should upgrade just fine0.11.5(you may have to reset encryption data though). The auto updating protocol is compatible with all versions of the new client (starting with the initial release of0.7.0). -
@Joe-Schmitt
Thanks for your answer.
But yesterday it didn’t works even i reset encryption data. I had to install manually the new client version -
@plegrand said in FOG 1.3 and old clients:
@Joe-Schmitt
Thanks for your answer.
But yesterday it didn’t works even i reset encryption data. I had to install manually the new client versioncan we see a client log from a non updating client please?
-
@x23piracy
It’s no more possible. I havent the computer with me and for my tests i had to remove logs -
@plegrand said in FOG 1.3 and old clients:
@x23piracy
It’s no more possible. I havent the computer with me and for my tests i had to remove logswhat a pity, this way we cannot figure out what happened.
-
@x23piracy said in FOG 1.3 and old clients:
@plegrand said in FOG 1.3 and old clients:
@Joe-Schmitt
Thanks for your answer.
But yesterday it didn’t works even i reset encryption data. I had to install manually the new client versioncan we see a client log from a non updating client please?
I had the same issue, reset encryption but it client did not auto update. My fix was the GPO to install the new client as mentioned earlier.
I got an authentication error on the log.
Was just looking to see if i uploaded an error log on my old posts
