Configuring UDPCast Failed on all 13 Nodes with RC6
-
@Tom-Elliott All nodes are failing again.
-
@george1421 I just finished the install and the updcast part passed and the install completed OK on my centos7 dev box. I have 1.3.0-rc6 installed.
-
Ohhhhh no. Something wrong with the source archive?!? @Tom-Elliott
udpcast-20120424/rate-limit.h udpcast-20120424/util.h udpcast-20120424/udpr-negotiate.c tar: Skipping to next header gzip: stdin: invalid compressed data--crc error gzip: stdin: invalid compressed data--length error tar: Child returned status 1 tar: Error is not recoverable: exiting now
-
Just saw that George is saying that it is working for him.
@Stilty Can you please download and extract this archive by hand to see if it works?
sudo -i cd /tmp wget -O udpcast-20120424.tar.gz "https://github.com/FOGProject/fogproject/blob/dev-branch/packages/udpcast-20120424.tar.gz?raw=true" tar xvzf udpcast-20120424.tar.gz ...
-
I’ve moved on now from it failing at one part:
* Configuring UDPCast.........................................OK * Building UDPCast............................................Failed!
-
@Stilty Please check the log file again and post the last 10-20 lines…
Possibly you just don’t have enough free space on your disk??? Run
df -h
-
@Sebastian-Roth said in Configuring UDPCast Failed on all 13 Nodes with RC6:
tar xvzf udpcast-20120424.tar.gz
udpcast-20120424/udpr-negotiate.c tar: Skipping to next header gzip: stdin: invalid compressed data--crc error gzip: stdin: invalid compressed data--length error tar: Child returned status 1 tar: Error is not recoverable: exiting now root@IT-FOG10:/tmp#
-
@Stilty Just for clarity you did a svn or git update and then are rerunning the installer to produce this error? If so what are you using svn or git?
I just looked through my log and it did extract the updcast without issue and then compiled it afterwards.
In my case I use SVN to refresh the files.
-
Well yeah, I just tried downloading an extracting it on a normal PC! Failed! The archive seems to be damaged… @Tom-Elliott any ideas?
-
checking for inet_aton... yes checking for getopt_long... yes checking for dlsym... yes checking for 64-bit off_t... no checking whether gcc supports loff_t type... yes checking whether gcc supports offset_t type... no checking whether gcc supports long long type... yes configure: creating ./config.status config.status: creating Makefile config.status: creating config.h config.status: config.h is unchanged gcc -g -O2 -Wall -Wall -DBB_FEATURE_UDPCAST_FEC -D_FILE_OFFSET_BITS=64 -DUSE_SYSLOG -DUSE_ASSEMBLER -O6 -DNO_BB -I. -I. -c -o console.o console.c In file included from console.c:7:0: console.h:25:9: error: unknown type name ‘fd_set’ fd_set *read_set, struct timeval *tv, ^ make: *** [console.o] Error 1
-
@george1421 said in Configuring UDPCast Failed on all 13 Nodes with RC6:
ugh my log and it did extract the updcast withou
Im using GIT and yes I just put the udpcast where you said and then reran the installer.
-
@Sebastian-Roth line endings made there way into binary files. I’ve reverted the commit to before line changes where made.
-
@Tom-Elliott How do i revert to RC5? The server is not working and the PCs are getting suck at the PXE boot.
-
@Stilty did you repull git and reinstall?
-
@Tom-Elliott It says up-to-date but still doesn’t work.
I did git pull and then just ./installfog.sh
-
@Stilty Can you delete the git fogproject folder, and then re-clone please using this:
git clone --depth 1 https://github.com/FOGProject/fogproject.git
-
@Wayne-Workman said in Configuring UDPCast Failed on all 13 Nodes with RC6:
–depth 1
It still fails at the same spot when i revert to RC5, what do i do now?
-
@Wayne-Workman said in Configuring UDPCast Failed on all 13 Nodes with RC6:
@Stilty Can you delete the git fogproject folder, and then re-clone please using this:
git clone --depth 1 https://github.com/FOGProject/fogproject.git
I’m trying to install fog on centos 7 (updated), using the wiki guide (https://wiki.fogproject.org/wiki/index.php?title=CentOS_7) and I have the same problem.
I deleted the git fogproject folder, cloned again, reinstalled and i have the same problem again
- Setting up UDPCast…OK
- Configuring UDPCast…Failed!
-
Please try repulling again.
It’s still something to do with line endings. I’ve made the repo mimic the SVN repo at this point. I’m testing an install, but could use other’s help as well.
-
My installing appears to have fixed the issues.