Configuring UDPCast Failed on all 13 Nodes with RC6

[george1421]

@george1421 I just finished the install and the updcast part passed and the install completed OK on my centos7 dev box. I have 1.3.0-rc6 installed.

[Sebastian Roth]

Ohhhhh no. Something wrong with the source archive?!? @Tom-Elliott

udpcast-20120424/rate-limit.h
udpcast-20120424/util.h
udpcast-20120424/udpr-negotiate.c
tar: Skipping to next header

gzip: stdin: invalid compressed data--crc error

gzip: stdin: invalid compressed data--length error
tar: Child returned status 1
tar: Error is not recoverable: exiting now

[Sebastian Roth]

Just saw that George is saying that it is working for him.

@Stilty Can you please download and extract this archive by hand to see if it works?

sudo -i
cd /tmp
wget -O udpcast-20120424.tar.gz "https://github.com/FOGProject/fogproject/blob/dev-branch/packages/udpcast-20120424.tar.gz?raw=true"
tar xvzf udpcast-20120424.tar.gz
...

[Stilty]

I’ve moved on now from it failing at one part:

 * Configuring UDPCast.........................................OK
 * Building UDPCast............................................Failed!

[Sebastian Roth]

@Stilty Please check the log file again and post the last 10-20 lines…

Possibly you just don’t have enough free space on your disk??? Run df -h

[Stilty]

@Sebastian-Roth said in Configuring UDPCast Failed on all 13 Nodes with RC6:

tar xvzf udpcast-20120424.tar.gz

udpcast-20120424/udpr-negotiate.c
tar: Skipping to next header

gzip: stdin: invalid compressed data--crc error

gzip: stdin: invalid compressed data--length error
tar: Child returned status 1
tar: Error is not recoverable: exiting now
root@IT-FOG10:/tmp#

[george1421]

@Stilty Just for clarity you did a svn or git update and then are rerunning the installer to produce this error? If so what are you using svn or git?

I just looked through my log and it did extract the updcast without issue and then compiled it afterwards.

In my case I use SVN to refresh the files.

[Sebastian Roth]

Well yeah, I just tried downloading an extracting it on a normal PC! Failed! The archive seems to be damaged… @Tom-Elliott any ideas?

[Stilty]

@Sebastian-Roth

checking for inet_aton... yes
checking for getopt_long... yes
checking for dlsym... yes
checking for 64-bit off_t... no
checking whether gcc supports loff_t type... yes
checking whether gcc supports offset_t type... no
checking whether gcc supports long long type... yes
configure: creating ./config.status
config.status: creating Makefile
config.status: creating config.h
config.status: config.h is unchanged
gcc -g -O2 -Wall -Wall -DBB_FEATURE_UDPCAST_FEC -D_FILE_OFFSET_BITS=64 -DUSE_SYSLOG -DUSE_ASSEMBLER -O6 -DNO_BB -I.  -I.   -c -o console.o console.c
In file included from console.c:7:0:
console.h:25:9: error: unknown type name ‘fd_set’
         fd_set *read_set, struct timeval *tv,
         ^
make: *** [console.o] Error 1

[Stilty]

@george1421 said in Configuring UDPCast Failed on all 13 Nodes with RC6:

ugh my log and it did extract the updcast withou

Im using GIT and yes I just put the udpcast where you said and then reran the installer.

[Tom Elliott]

@Sebastian-Roth line endings made there way into binary files. I’ve reverted the commit to before line changes where made.

[Stilty]

@Tom-Elliott How do i revert to RC5? The server is not working and the PCs are getting suck at the PXE boot.

[Tom Elliott]

@Stilty did you repull git and reinstall?

[Stilty]

@Tom-Elliott It says up-to-date but still doesn’t work.

I did git pull and then just ./installfog.sh

[Wayne Workman]

@Stilty Can you delete the git fogproject folder, and then re-clone please using this:
git clone --depth 1 https://github.com/FOGProject/fogproject.git

[Stilty]

@Wayne-Workman said in Configuring UDPCast Failed on all 13 Nodes with RC6:

–depth 1

It still fails at the same spot when i revert to RC5, what do i do now?

[p.il]

@Wayne-Workman said in Configuring UDPCast Failed on all 13 Nodes with RC6:

@Stilty Can you delete the git fogproject folder, and then re-clone please using this:
git clone --depth 1 https://github.com/FOGProject/fogproject.git

I’m trying to install fog on centos 7 (updated), using the wiki guide (https://wiki.fogproject.org/wiki/index.php?title=CentOS_7) and I have the same problem.

I deleted the git fogproject folder, cloned again, reinstalled and i have the same problem again

• Setting up UDPCast…OK
• Configuring UDPCast…Failed!

[Tom Elliott]

Please try repulling again.

It’s still something to do with line endings. I’ve made the repo mimic the SVN repo at this point. I’m testing an install, but could use other’s help as well.

[Tom Elliott]

My installing appears to have fixed the issues.

[Quazz]

Odd, I’ve updated it on the intial update and subsequent updates and it all worked fine for me.