Trying to push image to client - Mounting File System Fail
-
My etc/exports file is already configured for that location.
-
@PageTown That’s good. Check for the
.mntcheckfiles.If they are there, you can proceed with the NFS testing, the results will give us a direction to go.
-
I think something else may be wrong. When I went to my /images folder at media/BFD_/images to check for the mtn files, nothing is in it besides the text file I created in the first step of the troubleshooting guide. I had three images before, and it shows that I have three images in the UI. Shouldn’t I be seeing my images in that folder? And the /dev folder isn’t there either. Are they hidden or something?
-
@PageTown They are hidden. In Linux, files and folders that begin with a period are hidden. Use CLI, and issue the command
ls -lahRt /media/BFD_/images -
@Wayne-Workman Here’s what I am seeing when I run that command:
-
@PageTown You’re missing the
.mntcheckfiles.Here’s the command to make them, and to set permissions afterwards:
touch /media/BFD_/images/.mntcheck
touch /media/BFD_/images/dev/.mntcheck
chmod -R 777 /media/BFD_/images -
It wouldn’t take ‘touch /media/BFD_/images/dev/.mntcheck’. It said that the location didn’t exist which makes me think that something has happened to all my images.
I have decided to wipe my server and start from scratch. Thanks for the help.
-
@PageTown That’s because the /dev directory doesn’t exist, from the below output. You could just make the directory with
mkdir /media/BFD_/images/dev -
I did a HDD wipe and re-install of Ubuntu 12.04 and Fog 1.2.0. I was able to upload an image without any issues, but when I try to push that image to a machine I am still getting hung up on the Mounting thing.
Before I start the troubleshooting process again, I wanted to mention that I am running Fog over a Server 2012 network. Fog is not handling the DHCP. On the server I have 066 Boot Server Host Name & 067 Bootfile Name configured to allow undionly.kpxe and Fog to boot over the network. Could something in the server setup be causing this issue?
-
@PageTown said:
I was able to upload an image without any issues, but when I try to push that image to a machine I am still getting hung up on the Mounting thing.
That sounds really strange. Why would it upload (to NFS) but not download from it? Again, show us the output you get from
ls -lahRt /media/BFD_/images! As well please show us the full output ofmount(I am wondering what filesystem that external drive is formated with).Could something in the server setup be causing this issue?
No I don’t think so. NFS has nothing to do with PXE boot or DHCP in general.
Changing the default image paths is not as easy as it might seem on first sight. I count it to the more advanced things to adjust on your FOG server and I would only recommend it to people having played with FOG and linux a fair bit. That said I am wondering if you are aware of the possibility to mount external devices to pretty much any directory within your filesystem. Doesn’t have to be
/media/XXX. So if you ever consider to setup things from scratch again you might want to simply mount your external disk to /images before installing FOG. -
@PageTown Doubtful that the Windows Server is causing issues. Are you using the /media/BFD_ path again?
-
@Wayne-Workman No. My path should be /images now.
-
@PageTown Then what do you get from
ls -lahRt /images,mountandexportfs -v?? -
@Sebastian-Roth Here’s what I get after running la -lahRt /images now:
-
/imagesdirectory structure is looking good. But what about the other two commands I posted? -
@PageTown I don’t mean to derail this thread, but do the clients that you are trying to push to happen to be connected to a Cisco Small Business managed switch? It’s a shot in the dark, but I have gotten the exact same error you have when trying to use that. Our IOS based Cisco Catalyst switches are no problem, but there is something about the Cisco SB series that doesn’t play nice with FOG (there is probably a way to configure it properly, but I couldn’t figure it out). I apologize if this isn’t the case. If you are using that, try a dumb switch. That’s what resolved my issue.
-
@fry_p sidenote: The only SB switches I had issues with were some of the <24 port switches - and this was a issue with the stupid security they had messing with UDP/NFS; this was fixed with a firmware upgrade.
-
@Mentaloid said in Trying to push image to client - Mounting File System Fail:
@fry_p sidenote: The only SB switches I had issues with were some of the <24 port switches - and this was a issue with the stupid security they had messing with UDP/NFS; this was fixed with a firmware upgrade.
Ah, yes mine was a little 8 port SB. I didn’t have time to mess with it since a class was using the lab I was imaging the next period, but I’ll keep that in mind. Those things are a pain!
-
@fry_p That is EXACTLY what we have. I am trying to test this theory using a little Linksys router to handle DHCP, but I am unable to get my host machine to PXE boot. I have changed the settings in the router and set up a matching connection on the Fog server, but so far no luck. Any ideas?
-
@PageTown @Mentaloid I just tested this using updated firmware on the Cisco SB switch. I left all settings default and I was able to push an image to a client on the switch! As for the linksys, my networking knowledge is limited. I’m accustomed to running DHCP on a Windows Server. I’m sure one of these other fine gentlemen can help with that. You can also try updated firmware for the SB switch here: https://software.cisco.com/download/navigator.html?mdfid=283018960
(Should have all models of SB switch firmware there. I didn’t need a login to download. You can update through the switch GUI)
