GIT 5676 Disk Information in web UI is incorrect

[ch3i]

@mrdally204 lol nice home page

Have you a 4Gb partition ? can you post the result of df -h ?

[mrdally204]

@ch3i Thanks for the quick reply. here is the output

Filesystem      Size  Used Avail Use% Mounted on
/dev/sda1       909G   48G  815G   6% /
none            4.0K     0  4.0K   0% /sys/fs/cgroup
udev            3.9G  4.0K  3.9G   1% /dev
tmpfs           800M  676K  799M   1% /run
none            5.0M     0  5.0M   0% /run/lock
none            4.0G     0  4.0G   0% /run/shm
none            100M     0  100M   0% /run/user

[JJ Fullmer]

In the storage management of the fog gui is everything set correctly? IP address, interface, user/password and all that?
on the server what does your /etc/exports look like?

cat /etc/exports

What does fog say about your hard drive in the gui?
https://{fogip}/fog/management/index.php?node=hwinfo&id=1

I’ve seen mine mess up before and one of those configurations was just messed up. Maybe your ip isn’t static and it changed on you?
Other times a quick restart of apache refreshed and fixed the issue

sudo service apache2 restart

or

sudo /etc/init.d/apache2 restart

Or just a good old fashioned restart of the whole server can fix it to if it’s an odd bug in your server.
Though it’s most likely a simple configuration issue in the ui based on when this has happened to me a few times and since your nfs server is probably working since you were able to upload an image.
How big does the gui say your image is? You will need to enable “FOG_FTP_IMAGE_SIZE” under “General Settings” in the FOG Configuration then go to image management and list all images.

Hopefully one of those ideas helps.

[mrdally204]

@Arrowhead-IT

fog@FogServer:~$ cat /etc/exports
/images *(ro,sync,no_wdelay,no_subtree_check,insecure_locks,no_root_squash,insecure,fsid=0)
/images/dev *(rw,async,no_wdelay,no_subtree_check,no_root_squash,insecure,fsid=1)

My HD info looks accurate in the gui, see the screen shot below. I looked into the user/password of the storage management section and it looks to be correct. I have also tried rebooting the machine and restarting apache with no success unfortunately. This is not a show stopping issue by any means but the tinkerer in me is annoyed

[Wayne Workman]

Can you tell us more about the 1TB drive?

Is it external? USB? What filesystem does it use? What are the permissions on /images ?

[Tom Elliott]

Could you also grab a screen shot of the home page? Maybe there is an indicator on that? Seeing as we have a screenshot of the home page when it’s broken and a screenshot of the underlying hardware information, I think the only one we’re missing is the home page showing up as 4gb.

[Tom Elliott]

@mrdally204 I’ve now fixed the weird display issues that were presented.

This is because of the checks to build the selector. It would only clean the contents if there was data. This now has been corrected with a two fold approach.

First I fixed the panes by removing the check to see if there was indeed data to present. This allowed the page to display properly with all the panes, though the usage pane had an unidentified id passed. This undefined ID would still be clickable, but at least the page looked proper and operated more properly, minus the big blank white spots.

Second, I check if there are nodes for the page to look at. The elements that auto update will only display if there is at least one “graph enabled” node. If there are 0 graph enabled nodes, the Client Count, Disk Usage, and bandwidth elements will not even be printed.

It may take a bit to get used to, but I also imagine not too many people run with fog’s graph’s on all nodes disabled.

[mrdally204]

@Wayne-Workman The 1tb drive is internal and also used to run the OS.

fog@FogServer:~$ sudo file -sL /dev/sda1
/dev/sda1: Linux rev 1.0 ext4 filesystem data, UUID=546a8cba-febc-48e5-87da-a4c6ea712a5e (needs journal recovery) (extents) (large files) (huge files)

permission on /images

fog@FogServer:~$ ls -ld /images
drwxrwxrwx 5 root root 4096 Dec 14 11:11 /images

Anything I missed?

@TOM ELLIOTT ask and you shall receive

[JJ Fullmer]

@mrdally204 I usually set the owner and group of images to fog

sudo chown -R fog.fog /images

And I set the permissions to 775

sudo chmod -R 775 /images

Whether or not that’s the best security practice is arguable, and since your permissions are already 777 the owner being root probably doesn’t matter. But changing the owner might be worth a shot.

[Tom Elliott]

Remoted in, and found that he is using a 32 bit OS. The value I was using to do the math was a function called intval which cannot do math beyond 32 bit scope (if the OS is 32 bit).

To fix, I just removed the intval function around the free/used space.