Fog is hanging after choosing task

[Wayne Workman]

Choose the “compatibility check” item from the menu, run all the items in there and see if it all looks good.

[saltlife3122]

I am now having the same problem. Everything was working fine, I ran the update to 3411 now I just get a blank screen and
cursor when I try to image anything

[Tom Elliott]

Are you really on 3411?

Can you update to 3511?

What’s in the /var/log/apache2/error.log (Ubuntu) or /var/log/httpd/error_log (Redhat)

[saltlife3122]

I am on 3511 sorry

[davido38]

The same for me.

compatibility check fail on lan ok on disk with the kernel I have with the 1.2 version.

I try some other kernel but it’s worse. Kernel panic after choosing compatibility check.

[Wayne Workman]

@davido38

What model?

Have you looked at the “Working Hardware” and “Problematic Hardware” lists?
https://wiki.fogproject.org/wiki/index.php/WorkingDevices
https://wiki.fogproject.org/wiki/index.php/ProblematicDevices

[davido38]

Dell Optiplex 390

[Wayne Workman]

@davido38

Reinstall FOG using your installer.

Try again.

Please provide photos of the errors you are seeing.

[crosser]

I am also have an issue when I try to register a host. The bzimage and init both load and read “ok”, then the screen just turns blank with a blinking cursor in the top corner. Nothing happens after that.

I am currently using svn version 3510.

[Wayne Workman]

@Developers

Sounds like something is wrong with recent Trunk versions.

Four different people here reporting the same issue.

[Tom Elliott]

Please try re-running the installer. It seems there was an issue this morning with Sourceforge that cause a 0 byte downloaded file.

[Wayne Workman]

@Tom-Elliott said:

Please try re-running the installer. It seems there was an issue this morning with Sourceforge that cause a 0 byte downloaded file.

@saltlife3122
@davido38
@Chris-Garsee
@crosser

[ch3i]

@Wayne-Workman said:

@Tom-Elliott said:

Please try re-running the installer. It seems there was an issue this morning with Sourceforge that cause a 0 byte downloaded file.

@saltlife3122
@davido38
@Chris-Garsee
@crosser

@alltheworld xD

[crosser]

I am re-downloading 3513 now to see if it fixes the issue… Not sure if this is related, but in the process of re-downloading FOG, it pauses at the following section for quite a while…like, almost 2 hours long.

*Downloading kernels and inits . . .

Maybe it’s just a coincidence. Anyways, once this fully downloads and installs, I’ll report back the results.

Thanks again for all of the hard work the Devs and Moderators put in and thanks for the quick responses.

[crosser]

Here’s is the update:

So I have successfully updated our FOG server to svn 3515 and the results are the same unfortunately…

I try to register a host and it loads the bzimage quickly, then pauses for a few ‘extra’ seconds on the init.xz, but then it also finally loads just fine. Then the screen goes black (or blank) with a blinking cursor in the upper left corner of the screen.

Any help would be greatly appreciated.

[Tom Elliott]

What’s the output of:
ls -lhart /var/www/fog/service/ipxe (if ubuntu)
ls -lahrt /var/www/html/fog/service/ipxe (if redhat)

[crosser]

fog@fogproject:~$ ls -lhart /var/www/fog/service/ipxe
total 4.5M
-rw-r–r-- 1 fog www-data 907 Jun 4 11:56 boot.php
-rw-r–r-- 1 fog www-data 230K Jun 4 11:56 grub.exe
drwxr-xr-x 6 fog www-data 4.0K Jun 4 11:56 .svn
-rw-r–r-- 1 fog www-data 1.8M Jun 4 11:56 memtest.bin
-rw-r–r-- 1 fog www-data 25K Jun 4 11:56 memdisk
-rw-r–r-- 1 fog www-data 44K Jun 4 11:56 bg.png
-rw-r–r-- 1 fog www-data 1.4K Jun 4 11:56 advanced.php
drwxr-xr-x 4 www-data www-data 4.0K Jun 4 11:56 …
-rw-r–r-- 1 fog www-data 0 Jun 4 12:41 bzImage32
-rw-r–r-- 1 fog www-data 0 Jun 4 13:26 init.xz
-rw-r–r-- 1 fog www-data 0 Jun 4 14:11 init_32.xz
drwxr-xr-x 2 fog fog 4.0K Jun 4 15:57 backup
drwxr-xr-x 4 fog www-data 4.0K Jun 4 15:57 .
-rw-r–r-- 1 fog fog 2.4M Jun 4 15:57 bzImage

[Tom Elliott]

Can you try re-running the installer.

The “stall” is the bzImage files and inits are 0 size.

[crosser]

This will be like my 4th time re-running the installer. Is it possible to get direct download links to these files and I can manually go in and replace them myself?

If not, I can try to re-run the installer again.

Once again, I thank you for your time and support.

[crosser]

I think I found the files online:

http://sourceforge.net/projects/freeghost/files/InitList/
http://sourceforge.net/projects/freeghost/files/KernelList/

I’ll download them tomorrow and install them in the following location:
\var\www\fog\service\ipxe

If this doesn’t work, I’ll try to re-run the installer tomorrow. I’ll report back with the results.

Thanks