Image download is stuck at 99%
-
@Wayne-Workman he has always checked FTP and /dev
-
-
Can you run this?
[CODE]ls -laR /images[/CODE]
and post the output?
-
ls -laR /images /images: total 24 drwxrwxrwx 6 root root 4096 May 26 14:54 . drwxr-xr-x 25 root root 4096 May 27 08:48 .. drwxrwxrwx 4 root root 4096 May 27 09:08 dev drwxrwxrwx 2 root root 4096 May 20 16:45 Image20150520 drwxrwxrwx 2 root root 4096 May 26 14:54 Image20150526 -rwxrwxrwx 1 root root 0 May 13 10:36 .mntcheck drwxrwxrwx 2 root root 4096 May 13 10:36 postdownloadscripts -
@Tune389 You don’t have .mntcheck in your /images/dev folder ? You don’t have any files at all inside Image20150526 or Image20150526 ?
-
@Wayne-Workman only 2 folders named like a mac adress. Image-20150526:
ls -l total 8600324 -rwxrwxrwx 1 root root 2 May 26 14:16 d1.fixed_size_partitions -rwxrwxrwx 1 root root 1048576 May 26 14:22 d1.mbr -rwxrwxrwx 1 root root 190 May 26 14:22 d1.minimum.partitions -rwxrwxrwx 1 root root 30 May 26 14:16 d1.original.fstypes -rwxrwxrwx 1 root root 190 May 26 14:16 d1.original.partitions -rwxrwxrwx 1 root root 0 May 26 14:16 d1.original.swapuuids -rwxrwxrwx 1 root root 8644532 May 26 14:22 d1p1.img -rwxrwxrwx 1 root root 8797012661 May 26 14:54 d1p2.imgI try now a complete reinstallation.
-
I did these steps …
- clear all files in /images
- delete databse from fog
- run fog installation
- upload an image (works fine)
- try an download - but failed .mntcheck is missing
- create .mntcheck file
- try the download again - it works. (unicast)
- try multicast - failed on “starting to restore image” without an error.
- reboot fog server
- try it again - nope …
- run again the fog setup (last time it fixed the problem)
- start multicast
- 97% - 98% - 99% - 100%
- and after 5 min still at 100% … no reboot …
- after a hard reboot - problem again partition size is not correct.
- /topic/5022/image-download-is-stuck-at-99/7
Fog-version: 3480
-
@Tune389 Hi, have you test multicast with multiple hosts ? If yes, could you try with a single host.
-
@ch3i same Problem
-
@Tune389 I’ll try to multicast on my server.
-
-
@ch3i at “starting to restore image” ?
-
@Tune389 Yep. Have that in my log :
[05-28-15 11:26:17 am] | Task (55) is new! [05-28-15 11:26:17 am] | Task (55) /fogimages/MASTER5800ADM image file found. [05-28-15 11:26:17 am] | Task (55) 1 client(s) found. [05-28-15 11:26:17 am] | Task (55) sending on base port: 55828 [05-28-15 11:26:17 am] CMD: cat /fogimages/MASTER5800ADM/d1p1.img | /usr/local/sbin/udp-sender --interface eth0 --min-receivers 1 --max-wait 300 --portbase 55828 --full-duplex --ttl 32 --nokbd --nopointopoint;cat /fogimages/MASTER5800ADM/d1p2.img | /usr/local/sbin/udp-sender --interface eth0 --min-receivers 1 --max-wait 300 --portbase 55828 --full-duplex --ttl 32 --nokbd --nopointopoint;cat /fogimages/MASTER5800ADM/d1p3.img | /usr/local/sbin/udp-sender --interface eth0 --min-receivers 1 --max-wait 300 --portbase 55828 --full-duplex --ttl 32 --nokbd --nopointopoint; [05-28-15 11:26:17 am] | Task (55) has started. [05-28-15 11:26:27 am] | Task (55) is no longer running. [05-28-15 11:26:27 am] | Task (55) has been cleaned as complete.Reading the log, that’s the speedest multicast deploy of the world lol
-
@ch3i I have the same issue, executing the fogsetup fixed this (see here) problem. I don’t know why but I have to execute the setup also a second time after a clean installation to fix the upload freeze.
edit:
@Wayne-Workman the Problem is not solved only the freeze at the start of the upload
-
@ch3i any new informations about your tests? Is it working now, or is it a generally fog bug in the current version?
-
-
@ch3i okay thanks for the info. I try now to downgrade my fog version back to 1.2 …
-
-
