FOG BIOS And EFI Coexistence

d4rk3

[quote=“Wayne Workman, post: 46763, member: 28155”]That’d be a negative… for both BIOS and UEFI… used two different machines to test.

I’ve attached my WORKING ltsp.conf file, and the one I got from here (which I ripped the comments out of, and changed IP, and repaced .kpxe and .efi with .0)

I also ensured I had the .0 files, too.[/quote]

Give this a try under [B]tftp-root=/tftpboot[/B] (replace FOG with your FOG server’s hostname):

[CODE]dhcp-boot=undionly.kpxe,FOG,10.0.0.3
dhcp-match=set:efi-ia32,option:client-arch,6
dhcp-boot=tag:efi-ia32,ipxe.efi,FOG,10.0.0.3
dhcp-match=set:efi-x86_64,option:client-arch,7
dhcp-boot=tag:efi-x86_64,snp.efi,FOG,10.0.0.3
dhcp-range=10.0.0.3,proxy,255.255.255.0
[/CODE]

Junkhacker

[quote=“Wayne Workman, post: 46755, member: 28155”]Are you using a dongle to Ethernet adapter, or WiFi ?[/quote]

using the microsoft USB dongle. my legacy machines are working like they always have, uefi machines are loading ipxe.efi

Wayne Workman

[quote=“Junkhacker, post: 46782, member: 21583”]using the microsoft USB dongle. my legacy machines are working like they always have, uefi machines are loading ipxe.efi[/quote]

Do share how you did it.

need2

[quote=“Junkhacker, post: 46782, member: 21583”]using the microsoft USB dongle. my legacy machines are working like they always have, uefi machines are loading ipxe.efi[/quote]

Do I need to bribe you?

Junkhacker

for windows server 2012 DHCP, it was as simple as the link Wayne Workman posted.
[url]http://www.syslinux.org/archives/2014-January/021404.html[/url] create vendor class that matches uefi systems ([I][COLOR=#000000]PXEClient:Arch:00007[/COLOR][/I]) and give those that match a different bootfile (in my case, ipxe.efi)

need2

I see… interesting. This may be the direction that things have to go. DnsMasq seems in sufficient for EFI PXE and some older PXE clients. I’m still going to try a few things with it, but otherwise we might just have to make good documentation on the changes to make to a Windows 2012+ DHCP and a Linux DHCP to achieve coexistence. I will work on the Windows 2012 DHCP configs eventually (assuming DnsMasq fails me), but I will need to spin up a new 2012 server and integrate it to our domain first.

Wayne Workman

This is the thread:

[url]http://fogproject.org/forum/threads/undionly-kpxe-and-ipxe-efi.12607/[/url]

d4rk3

Has anyone tried either of my configs I posted? Both of them properly serve legacy/efi bootfiles.

Wayne Workman

I will tonight. I had other things going on last night when you posted those.

need2

I will see what I can do as well… light staffing here today so I’m a bit busy.

d4rk3

No worries, just wanted to make sure nobody overlooked them.

Wayne Workman

[quote=“d4rk3, post: 46768, member: 23583”]Give this a try under [B]tftp-root=/tftpboot[/B] (replace FOG with your FOG server’s hostname):

[CODE]dhcp-boot=undionly.kpxe,FOG,10.0.0.3
dhcp-match=set:efi-ia32,option:client-arch,6
dhcp-boot=tag:efi-ia32,ipxe.efi,FOG,10.0.0.3
dhcp-match=set:efi-x86_64,option:client-arch,7
dhcp-boot=tag:efi-x86_64,snp.efi,FOG,10.0.0.3
dhcp-range=10.0.0.3,proxy,255.255.255.0
[/CODE][/quote]

I don’t know what parts you want me to take out, though…

Tom Elliott

Who’s already got this working?

d4rk3

[quote=“Wayne Workman, post: 47037, member: 28155”]I don’t know what parts you want me to take out, though…[/quote]

None. Just replace [B]FOG[/B] with your FOG server’s hostname and replace [B]10.0.0.3[/B] with your FOG server’s IP.

I goofed on the last line, it should read [I][FONT=Consolas]dhcp-range=[/FONT][/I][B][I][FONT=Consolas]10.0.0.0[/FONT][/I][/B][I][FONT=Consolas],proxy,255.255.255.0[/FONT][/I]

For that, replace [B]10.0.0.0[/B] with your network’s address.

And if you want to change any of the bootfiles to different ones have at it.

Wayne Workman

Well, 10.0.0.3 IS my home FOG server’s IP address. It’s a private address, not public, and it’s home so I don’t care about sharing here.

And my network’s address is 10.0.0.0 I set my house up like that for simplicity… it’s easier to type than that dumb 192.168.1 BS that most home DHCP is configured with.

Tom Elliott

The dhcp-range line, I recommend, being set to your fog server. It will automatically work on the network your fogserver is on. If you’re actually trying to use a range of IP’s for Proxy to hand out then you would have something like:
[code]dhcp-range=10.0.0.0,10.0.0.255,proxy,255.255.255.0[/code]

However this is more than overkill. I think it highly unlikely you will be handing more than the network allowed (253 – e.g. gateway, network, broadcast) of your fog server’s possibilities.

If you know you’ll be hitting more than that at any time, just open the subnet to a higher range. Whatever the IP is set will be the same network the proxy hands out within.

Jeroen Brussich

[quote=“Junkhacker, post: 46793, member: 21583”]for windows server 2012 DHCP, it was as simple as the link Wayne Workman posted.
[url]http://www.syslinux.org/archives/2014-January/021404.html[/url] create vendor class that matches uefi systems ([I][COLOR=#000000]PXEClient:Arch:00007[/COLOR][/I]) and give those that match a different bootfile (in my case, ipxe.efi)[/quote]

Did you got this up and running?
I created the Vendor Class, created the policy, downloaded ipxe.efi and updated the DHCP server settings in 2012R2

Legacy Boot + undionly.kpxe ~ working
UEFI boot + ipxe.efi ~ [B]not working[/B]

[B]edit:[/B] typo ([I]ipxe.kpxe[/I] should have been[I] ipxe.efi[/I])

Junkhacker

[quote=“Jeroen Brussich, post: 47054, member: 23215”]Did you got this up and running?
I created the Vendor Class, created the policy, downloaded ipxe.efi and updated the DHCP server settings in 2012R2

Legacy Boot + undionly.kpxe ~ working
UEFI boot + ipxe.kpxe ~ [B]not working[/B][/quote]

ipxe network boot is working for me. i set my uefi boot to ipxe.efi
uefi imaging isn’t working perfectly for me, but that has nothing to do with the network
i can schedule tasks, access the boot menu (without graphics), and load the fog kernel

Jeroen Brussich

I did configure both bootfiles on the same tftpserver.
Maybe that’s what I did wrong?

This is what i see on my boot screen:
[CODE]tftp://MY.IP/default.ipxe… ok
http://MY.IP/fog/service/ipxe/boot.php… ok
http://MY.IP/fog/service/ipxe/bg.png… ok

Could not use picture: Exec format error (htt://ipxe.org/2e008081)
Could not boot: Exec format error (htt://ipxe.org/2e008081)
Could not boot: Exec format error (htt://ipxe.org/2e008081)

Failed to get IP, Booting back to bios
[/CODE]

I downloaded ipxe.efi from [url]https://svn.code.sf.net/p/freeghost/code/trunk/packages/tftp/[/url]

[B]edit:[/B] even if I don’t use the policy and make ipxe.efi the default BootFile Name of that scope, I get the same error. Maybe my ipxe.efi file is corrupt?

d4rk3

[quote=“Jeroen Brussich, post: 47057, member: 23215”]I did configure both bootfiles on the same tftpserver.
Maybe that’s what I did wrong?

This is what i see on my boot screen:
[CODE]tftp://MY.IP/default.ipxe… ok
http://MY.IP/fog/service/ipxe/boot.php… ok
http://MY.IP/fog/service/ipxe/bg.png… ok

Could not use picture: Exec format error (htt://ipxe.org/2e008081)
Could not boot: Exec format error (htt://ipxe.org/2e008081)
Could not boot: Exec format error (htt://ipxe.org/2e008081)

Failed to get IP, Booting back to bios
[/CODE]

I downloaded ipxe.efi from [url]https://svn.code.sf.net/p/freeghost/code/trunk/packages/tftp/[/url]

[B]edit:[/B] even if I don’t use the policy and make ipxe.efi the default BootFile Name of that scope, I get the same error. Maybe my ipxe.efi file is corrupt?[/quote]

It’s definitely working because the bootfile instructed your client to download default.ipxe and so on.

That being said, the problem now is with the bg.png picture. Maybe Tom will chime in with a fix for the bg.png…

FOG BIOS And EFI Coexistence

203

12.0k

17.3k

155.2k