Windows 7 Deployment FOG- SAD2 Driver tool
-
[quote=“falko, post: 3945, member: 48”]your virtual machine hard drives are set to IDE?[/quote]
They were not. I added an IdE Hard Disk and choose the existing disk attached to this machine. I then deleted the existing disk under the sata controller. I restarted and got the same error. SHould I reimage or do I have to change the disk on the original VM that I created the image from and recreate the image? -
Change disk on original one, mine is set to ide. I’m using virtualbox
-
Thanks. I will do that. After I change the type to IDE, will I need to rebuild the whole machine?
-
Yes start from scratch
-
I am using Oracle VM virtualbox Manger v 4.1.16 Everytime a create a new VM, it creates a sata drive. If I delete that one, change to a ide, then it will not boot. I get back to the same screen as before. How do I create a drive with a ide drive from the beginning? Am I missing something?
-
hmm, yeah it will always create a sata drive you just need to delete it and add and ide one, sounds like your doing it right,
-
[quote=“Kendall Eley, post: 3955, member: 1270”]Thanks. I will do that. After I change the type to IDE, will I need to rebuild the whole machine?[/quote]
It’s better just do rebuild the whole thing yes. It doesn’t take long since you have done it before. I have rebuilt mine three times.
-
I have built my image. I got all updates to the OS and installed Microsoft Office, Adober Reader, FLash, Java and a few others similare programs. (Note I had an error in my unattend file, so I recreated it after installing everything and then copied it over to the proper location) I then captured it to FOG. I then deployed it back to the VM. When it boots, I am asked to accept the license terms of Win 7 Pro Service Pack 1. If I accept, I am then prompted to choose how to deploy updates. I choose recommended settings. It then proceeds to finalizing settings (which is still running after 30 minutes) Any ideas on what I have done wrong?
-
[quote=“Kendall Eley, post: 4010, member: 1270”]I have built my image. I got all updates to the OS and installed Microsoft Office, Adober Reader, FLash, Java and a few others similare programs. (Note I had an error in my unattend file, so I recreated it after installing everything and then copied it over to the proper location) I then captured it to FOG. I then deployed it back to the VM. When it boots, I am asked to accept the license terms of Win 7 Pro Service Pack 1. If I accept, I am then prompted to choose how to deploy updates. I choose recommended settings. It then proceeds to finalizing settings (which is still running after 30 minutes) Any ideas on what I have done wrong?[/quote]
Are you sure you have copied the guide correctly? Have you run sysprep correctly? I’d suggest to strongly re read the instructions and try again with your xml file. Use snapshots, which will reduce your time. I know my guide is long and in some cases can be difficult to interpret due to language differences, but you will find that everyone does this differently so you may come across diff problems. I will try to upload my unattend xml tomorrow for you to try…
-
I have gotten my image to deploy to a virtual machine. When the DP_Install tool begins extracting, it stops and prompts me with a message box No files to Extract. I click ok and it begins extracting fine.
Also, how do I add drivers? I have an HP Elitebook 8560 with several devices that did not have drivers installed. I have the drivers downloaded from HP, but I am not sure how to inject them into the base image
-
[quote=“Kendall Eley, post: 4246, member: 1270”]I have gotten my image to deploy to a virtual machine. When the DP_Install tool begins extracting, it stops and prompts me with a message box No files to Extract. I click ok and it begins extracting fine.
Also, how do I add drivers? I have an HP Elitebook 8560 with several devices that did not have drivers installed. I have the drivers downloaded from HP, but I am not sure how to inject them into the base image[/quote]
re-read [B]STEP 8[/B] you need to download the driver packs and copy them to the necessary folder
-
Followed step 8 exactly. When the machine reboots, It has many unknown devices such as video card, NIc (both wired and wireless), Card reader, and others. I have since found those drivers. Is there a way to inject those drivers into the script in step 8?
-
what other drives are you missing i find that the driverpacks has them all for my setup. and then windows update will finish it off
-
I did not have the Network card driver for that machine, The wireless card, and several others. The network card is the most pressing, because obviously Windows can not access the internet without that.
-
hmm I only know step 8 using drivers from [URL=‘http://driverpacks.net/downloads’]http://driverpacks.net[/URL] so i am not much help, hopefully someone else will chime in
-
Thanks for your attempts to help. When the driverpacks script runs, it issues a message box that says No Files to Extract. I click ok, it seems to begin extracting and run fine after that. Any idea why that might occur?
-
[quote=“Kendall Eley, post: 4271, member: 1270”]Thanks for your attempts to help. When the driverpacks script runs, it issues a message box that says No Files to Extract. I click ok, it seems to begin extracting and run fine after that. Any idea why that might occur?[/quote]
Hi,
I suspect you are doing something wrong, or you are using a diff script to the one I suggest.
Make sure you put your downloaded driver packs in the location below (for a 64 bit machine):
[IMG]http://i.imgur.com/4Xsr9.jpg[/IMG]
If it is a 32 bit windows, put them in x86 of NT6.
Download the version of DP install tool I specify in step 8, I think it’s version 111118 or something. But just replace the DP_Install_Tool.cmd with the one I uploaded previously: (I’m having problems uploading to the forums now, but it’s still attached to the bottom of the third post in this thread). You don’t have to do the whole process to test the tool. You can run the script manually to test it. Just run DP_Install_Tool.cmd manually on any computer that doesn’t have drivers. Make a virtual and use snapshots so you can try it multiple times. The idea is to get it working without any interferance or prompts. That’s why i removed all pauses from the script, there is no way my script will stop now.
I don’t believe you will have to worry about injecting more drivers into your image but if you do you will have to learn how by following the guides on Driverpacks.net
-
Alrighty. I’ve been beating my head against this for the last 4 days now. I’ve created my VM in VirtualBox, verified that its using IDE instead of SATA and have created and recreated my Win7 image 5 separate times now thinking that I’ve just messed something up. The image works flawlessly on my VM. It uploads just fine. It downloads to an Optiplex 390 just fine. But when I boot the machine, it simply states Missing Operating System.
I’ve created a Win7 image with just one partition. The 100MB partition, I get rid of when initially installing. The only things I’ve installed on the image itself are updates and Office 2010. That’s it. Any suggestions out there?
-
[quote=“Gilgamesh1082, post: 4366, member: 404”]Alrighty. I’ve been beating my head against this for the last 4 days now. I’ve created my VM in VirtualBox, verified that its using IDE instead of SATA and have created and recreated my Win7 image 5 separate times now thinking that I’ve just messed something up. The image works flawlessly on my VM. It uploads just fine. It downloads to an Optiplex 390 just fine. But when I boot the machine, it simply states Missing Operating System.
I’ve created a Win7 image with just one partition. The 100MB partition, I get rid of when initially installing. The only things I’ve installed on the image itself are updates and Office 2010. That’s it. Any suggestions out there?[/quote]
I suppose the two differences I see there are;
-
you are deleting the 100mb partition, I left it there are there is really no reason to delete it and
-
you are using virtual box instead of Vmware tools.
I doubt it is the second (vmware tools) that is the problem, more likely its the removal of the 100mb partition. Try leaving it there and checking if this works. Then try using vmware tools after that. It’s free for 30 days with vmware workstation 8.
Also make sure the dell optiplex has fully up to date bios. Can you try to deploy it to another PC? How about another vitual PC?
-
-
Alrighty. Went back and redid it again. This time, I image to the 390 and it goes through Sysprep. Now my problem is that it hangs on Setup is checking video performance. It does this on multiple machines and on my VM. Any suggestions?
