040ee119 error on boot

[Buddy]

Will check it against my environment to see if it helps me. Will post back tonight.

[RipAU]

Ok just tested with each file in --> [url]http://mastacontrola.com/ipxe/latest/[/url]

I’m finding the ipxe.kkpxe still has error 040ee119 but the undionly.kkpxe had an error with default.ipxe error 3d126001 (Dell OptiPlex 755 and Dell Latitude E5410)
I didn’t get the error code for the rest of the files but I can re-test and write them down if needed.

[Buddy]

Just tested them all as well. undionly.pxe throws it in a boot loop (but still gets error (op not sup)- flashes really fast). ipxe.pxe does something new (see image below). The rest just did the operation not supported. The ipxe.pxe error doesn’t make a lot of sense though as seen in second pic the path is correct.

[url=“/_imported_xf_attachments/0/913_ScreenShot535.png?:”]ScreenShot535.png[/url][url=“/_imported_xf_attachments/0/914_ScreenShot536.png?:”]ScreenShot536.png[/url]

[Buddy]

The above was off a dell 390. Just tested them all on hp 8300 elite:

unidonly.pxe - - puts it into a boot loop

All others = operation not supported.

[RipAU]

Hi guys, as a quick workaround till the iPXE issues are working I posted this in another post.
Might help a few people?

[url]http://fogproject.org/forum/threads/ipxe-issues-work-around.10727/[/url]

Cheers,

[Buddy]

Thank you I will try this in the morning. Getting late now. I will let you know.

[Tom Elliott]

[url]http://www.fogproject.org/wiki/index.php/Building_undionly.kpxe[/url]

If you want to give this a shot!

[Tom Elliott]

If you’re still having issues with that try this:
[url]http://fogproject.org/wiki/index.php/Chainloading_PXE_to_iPXE_using_pxelinux.0[/url]

[K3nnyfr]

Just did that fix, having now “booting from san device 0x00” then nothing happens…

[Tom Elliott]

K3nnyfr, change the boot exit style from sanboot to exit or grub and let me know if that helps you out.

[K3nnyfr]

We’ve messed up totally, we’ve started reinstall completly the OS (Debian) + FOG in 1.0.1.
You can delete my post, we’ll see that next Thurdsay (Week-end + day off + 2 days of meetings)

Thanks for your help !!

[Tribble]

Finally managed to get around to looking at those switches. Disabled Spanning Tree Protocol, and they now boot correctly.

Thanks Tom.

[Wolfbane8653]

[quote=“Tribble, post: 29689, member: 17221”]Finally managed to get around to looking at those switches. Disabled Spanning Tree Protocol, and they now boot correctly.

Thanks Tom.[/quote]

Just poking fun.

[quote=“Wolfbane8653, post: 29152, member: 3362”]Tribble check out this: [url]http://fogproject.org/forum/threads/nothing-is-working.10598/page-2#post-28305[/url]

I’m sure that the Dell Powerconnects have Spanning Tree Protocol (STP) enabled by default. Please confirm that these have be disabled.

Also there seems to be a portfast function as well. With portfast being disabled it would interfere with iPXE and not PXE[/quote]

[cwh]

Hello,
Did I miss where the 0x040ee119 error final solution was? I am trying on an HP 15T. I have tried the “latest” and “default good” on the mastacontroler page, tried the symlink ln -s pxelinux.0.old undionly.kpxe method. None have worked.

My Fog box is working. I can connect with Dell Optiplex, Lenvova E545 no problem, upload/download images, just can’t boot to pxe with the HP 15T.

[Baron Grazic]

I am having the exact same problem as DanielR - Getting error 0x040ee119 on our Acer 1830 fleet, however both our Acer B113 & Acer 3830 fleets are working fine.
If DanielR is still around, did you fix the issue?
We have tested the default files with Fog 1.1.2, as well as the files available on Tom’s site under both “Latest 5Jun” and “e0478 3Jun”.
Any suggestions?

[url=“/_imported_xf_attachments/1/1170_Fog 03 kpxe.jpg?:”]Fog 03 kpxe.jpg[/url]

[kbin]

FWIW, I spent a couple of hours trying the different binaries in this thread which solved nothing up until i stumbled upon this from the wiki and I got it to work in 10 minutes, big workaround sure but I was merely concerned with getting it up and running:
[url]http://www.fogproject.org/wiki/index.php/Chainloading_PXE_to_iPXE_using_pxelinux.0[/url]

0x040EE119 error in all clients i’ve tried (VirtualBox, Linux/KVM/qemu, HP Laptop/Intel chipset, HP Desktop/Intel chipset). Juniper Netscreen DHCP server, FOG 1.2.0, Ubuntu 12.04LTS.

//Kalle

[sushant jangale]

[quote=“Tom Elliott, post: 29508, member: 7271”]If you’re still having issues with that try this:
[url]http://fogproject.org/wiki/index.php/Chainloading_PXE_to_iPXE_using_pxelinux.0[/url][/quote]
I have tried chainloading , and now i am unable to open webpage,
webpage is saying unable to connect to database

[sushant jangale]

what does this mean, it is part of file init.database.php in /var/www/fog/common

if (!$conn)
{
die(_(‘Unable to connect to Database’));
}

[sushant jangale]

yeah fixed it, i restarted mysql service, now opens the webpage…
But error 0x040ee119 is still there after chainloading

[Tom Elliott]

How long is it taking for systems to get DHCP address?