The "auto deploy" function not working
-
The “auto deploy” function (it fills in the username and password for manual deployment, so I don’t have to always enter them manually) does not work for one type of laptop (HP 450 G10) - it works for about 10 other types of laptops.
FOS is fresh.
Thus, this type of laptop can now only be deployed via the web interface from a task.Thank you in advance for your help.
-
Maybe ipxe.efi is causing the error?
>> Start PXE over IPv4 Station IP address is 192.168.13.134 Server IP address is 192.168.12.10 NBP filename is ipxe.efi NBP filesize is 1085440 Bytes Downloading NBP file... NBP file downloaded successfully. iPXE initialising devices...WARNING: Using legacy NIC wrapper on 0c:0c:0c:0c:8c:0c ok iPXE 1.21.1+ (g11570) -- Open Source Network Boot Firmware -- https://ipxe.org Features: DNS FTP HTTP HTTPS iSCSI NFS TFTP VLAN SRP AoE EFI Menu Waiting for link-up on net1 .. OK Configuring (net0 bc:0f:f3:85:d3:ab)..... -
@lan Which version of FOG do you currently use?
Quite possibly this is fixed in the latest dev-branch version already (fix on github).
-
@Sebastian-Roth My version is 1.5.9
Could this be the problem? When will this fix (this version) be public?
-
@lan The latest “public” version of fog is 1.5.10
The dev-branch version install is described in the latter sections of this doc
https://docs.fogproject.org/en/latest/install-fog-server -
Thanks! 1.5.10. solved the problem!
The strange thing was that on the opening page of FOG 1.5.9, “Latest Version:” was written as 1.5.9. (I can’t show it anymore because I’ve upgraded it to 1.5.10)
