Failed to start php-fpm.service
-
@george1421 / @Sebastian-Roth Sorry for the delayed response, it’s been a busy work-week. Since I have a fresh install of LM 20 I’d be happy to pitch in to help determine the cause of the issue if you can send me some instructions. This isn’t an urgent issue for me but I’m definitely willing to help out if I can. I also have a presence over at https://forums.linuxmint.com/ so I can request help there if needed. My ability might be delayed a bit during the work week but I’d have more time during weekends. I appreciate all the time/effort you both put into making FOG such a great imaging solution!
-
@LOF Thanks for offering to help. Let’s give it a try. Though turnaround times might be very long to get to the final conclusion.
First I would ask you to start the FOG installer as usual. One of the first questions is your Linux OS, which is usually being detected properly. Should be
2) Debian Based Linux (Debian, Ubuntu, Kubuntu, Edubuntu)in your case. Is this the case?Looking through the script code I might have figured out what was causing this. So if you answer yes the the first question you might wanna try the latest from
dev-branch. -
@Sebastian-Roth Thanks Sebastian, I already know the answer and it’s Yes. Also, I’ve already pulled down the dev-branch and got the error before my initial post. So what’s next? Should I delete the previous dev-branch install and download/run it again?
-
@LOF said in Failed to start php-fpm.service:
Also, I’ve already pulled down the dev-branch and got the error before my initial post
Which version number is shown by the installer script? Just want to make sure we are on the right track here.
As well make sure this is still in a kind of fresh state and
/opt/fog/.fogettingsis not created yet. Because if it is then things will behave differently in this particular situation.Should I delete the previous dev-branch install and download/run it again?
No need to delete. You can re-run the FOG installer as often as you like if it is the same or a later version of what you have installed/run before. Should not cause any trouble.
-
@Sebastian-Roth Hi Sebastian, thanks for the response and sorry for the delay. The version showing in the current installer script I have is: Version: 1.5.9-RC2.10 As for /opt/fog/.fogsettings I’ve confirmed again it isn’t there and the /opt directory is empty.
I ran the installer again to get the version number and it failed:
fog/fogproject-dev-branch/bin/error_logs/fog_error_1.5.9-RC2.10.log !!
!!!ii wget 1.20.3-1ubuntu1 amd64 retrieves files from the web
ii xinetd 1:2.3.15.3-1 amd64 replacement for inetd with many enhancements
ii zlib1g:amd64 1:1.2.11.dfsg-2ubuntu1 amd64 compression library - runtime
New password: Retype new password: passwd: password updated successfully
Failed to stop php-fpm.service: Unit php-fpm.service not loaded.Thanks and let me know if I should download/try a different version.
-
@LOF Seems like your git pull has not gone to the latest version, which is 1.5.9-RC2.11
-
@Sebastian-Roth Thanks for pointing that out, I didn’t do a git pull initially, just downloaded the .tar.gz I’ll grab that version and see how the install goes. I’ll let you know.
-
@Sebastian-Roth Good news! I did a git-pull this morning from dev-branch, ran the installer and it worked! I’ve created an image and will test capture/deploy but I expect it will work fine. Question: Any risk staying on the dev version or should I plan on switching to the next stable version when it’s GA?
-
@LOF Staying on
dev-branchis currently not very “dangerous” at the moment because we don’t have the time to push out much changes. So it’s save to stay there for now. I recommend you to update to 1.5.9 when it’s finally out. -
@Sebastian-Roth Great, thanks for helping to get this working on Linux Mint! One last question: What’s the recommended/most-tested distro for running FOG? Is that still CentOS?
-
@LOF said in Failed to start php-fpm.service:
What’s the recommended/most-tested distro for running FOG? Is that still CentOS?
Most of the common distros are tested every night against the current release of FOG. That testing system is managed by @Wayne-Workman
Daily Clean Installation Results: http://fogtesting.theworkmans.us/The most stable OS to date is Centos 7 and 8 (caveat I just saw that centos 8 has an issue today). Now understand that may change tomorrow, but for today Centos.
-
@george1421 Ok great and VERY helpful! Thanks!
-
I know @george1421 loves CentOS, but Debian is also very stable for fog too
-
@Wayne-Workman Thanks Wayne, that’s good to know! LM is my favorite distro and what I’m most familiar with. They do have a version based on Debian called ‘LMDE’ https://www.linuxmint.com/download_lmde.php Being a long-time FOG user/fan it seems maybe a distro designed more for a server than a desktop role would be better. Up until now I’ve never had any issues at all running FOG on Linux Mint but I’m not averse to switching to something else that works better and is more stable. One of the things I’ve learned since becoming involved with Open Source projects way back in 1997 is “The right tool for the job.”
-
Any update on this issue? I am trying to install FOG 1.5.9 on Ubuntu and getting the exact same errors.
Failed to stop php7.1-fpm.service: Unit php7.1-fpm.service not loaded.
(Also tried on Ubuntu 22).
-
@jester805 similar to recent thread: https://forums.fogproject.org/topic/16399/upgrading-fog-1-5-4-to-1-5-9-stable-version-using-github?_=1658515431542
Answer No to the first question about reinstalling apache seems to let the OP of that thread get things installed on 16.04.
FWIW Ubuntu 20.04 LTS is the latest version supported by the FOG installer. 22.04 LTS has not been tested as of now.
-
Hello, anyone know how to fix this issue while intalling fog plz :“Unit php-fpm.service not found” - “failed to start php-fpm.service” ?
I’m desparate
-
@sow20 Please upgrade your installer package to the dev-branch. The 1.5.9GA release doesn’t support Debian 11 or Ubuntu 21.04 or newer.
-
@george1421 said in Failed to start php-fpm.service:
Please upgrade your installer package to the dev-branch.
Thank you @george1421 It work !
