brand new dell latitude 3500
-
@bigjim Your dnsmasq config is outdated if you’re using the a newer version. (and UEFI + BIOS proxydhcp didn’t work at all on older versions)
dhcp-boot=tag:UEFI32,i386-efi/ipxe.efi,10.5.0.240
dhcp-boot=tag:UEFI,ipxe.efi,10.5.0.240
dhcp-boot=tag:UEFI64,ipxe.efi,10.5.0.240
The syntax
tag:is no longer valid and needs to be replaced withnet:https://wiki.fogproject.org/wiki/index.php?title=ProxyDHCP_with_dnsmasq#Install_dnsmasq_on_CentOS_7 for reference
It’s confusing because there’s info on both older versions of dnsmasq and the newer ones, but likely this is the cause.
-
Has anyone figured this out yet?
-
@Mountainmanmoore What exactly do you mean be “this”???
-
If by this you mean booting a Dell Latitude 3500 via UEFI, I was able to get that going by setting up my DHCP server correctly as indicated in the post here.
-
Sorry to dig up an old post but I have a lot of 30 of these laptops that need imaging.
I get to the Fog menu, so I know my Windows DHCP server settings are okay, but the second I go to “Perform Quick Host Registration/Inventory” the server reports that bzImage loads and then immediately I receive an error that says Chainloading failed followed by the same message as the error posted here:
https://forums.fogproject.org/topic/12108/could-not-select-exec-format-error-http-ipxe-org-2e008081
I am using the laptop’s integrated ethernet NIC. In the laptop’s BIOS, the UEFI network stack is set to enabled w/PXE. The SATA controller is set to AHCI mode. Secure boot is disabled, as is the TPM and Absolute Guard.
It should be noted that I had previously tried the SATA controller in RAID ON mode and tried a registration previously and those attempts proceeded to boot the registration menu but failed to find a hard drive, so I switched the controller, did a clean install because Windows didn’t like that, and tried again.
-
@TheFunk35 What version of FOG, and is the firmware up to date on these 3500s?
-
@george1421 Latest production version of Fog 1.5.8 running on CentOS 7. I don’t know about the firmware. I will try to update it tonight. I’m not hopeful that will help. It looks like my older Precision T3610 desktops are having a similar issue. They all reach the Fog menu but then trying to load anything from there is a no go.
-
@TheFunk35 For sure the computer is in uefi mode? And you are double sure that safeboot is disabled?
Just for grins what are you sending as a PXE boot file to this computer?
While I seriously doubt is an ipxe menu issue if you go to a browser and call up this url, this is the program behind the iPXE menu.
http://<fog_server_ip>/fog/service/ipxe/boot.phppost the results here. -
@george1421 I went ahead and updated firmware. The 3500s received a firmware update on 3/13/20.
After applying the latest firmware the issue still stands. Should I try with a different ethernet adapter or is this an ipxe issue? It looks like these laptops come with realtek NICs. They seem like junky NICs. They’re the kind with the little clip built into the laptop case that are always insanely difficult to pull an RJ-45 out of. Should I try with realtek.efi instead of ipxe.efi?
-
@TheFunk35 You can try the realtek.efi boot loader, but I don’t think that is the problem. What is happening is the bzImage file transferred by ipxe.efi file is not runnable on the target computer, maybe because its corrupt or something else is blocking it from running. Like always this error should not happen.
-
@george1421 Info as requested. I do have a few custom menu items but the weird thing is, everything works perfectly when booting legacy. It seems I’m having this issue only with UEFI booting devices.
#!ipxe set fog-ip 192.168.77.146 set fog-webroot fog set boot-url http://${fog-ip}/${fog-webroot} cpuid --ext 29 && set arch x86_64 || set arch i386 goto get_console :console_set colour --rgb 0x00567a 1 || colour --rgb 0x00567a 2 || colour --rgb 0x00567a 4 || cpair --foreground 7 --background 2 2 || goto MENU :alt_console cpair --background 0 1 || cpair --background 1 2 || goto MENU :get_console console --picture http://192.168.77.146/fog/service/ipxe/bg.png --left 100 --right 80 && goto console_set || goto alt_console :MENU menu colour --rgb 0xff0000 0 || cpair --foreground 1 1 || cpair --foreground 0 3 || cpair --foreground 4 4 || item --gap Host is NOT registered! item --gap -- ------------------------------------- item fog.local Boot from hard disk item fog.memtest Run Memtest86+ item fog.reginput Perform Full Host Registration and Inventory item fog.reg Quick Registration and Inventory item fog.deployimage Deploy Image item fog.multijoin Join Multicast Session item fog.sysinfo Client System Information (Compatibility) item Ghost Symantec Ghost Imaging Solution item Windows_PE_x86 Install 32 bit Windows OS item Windows_PE_x64 Install 64 bit Windows OS item PMagic Parted Magic Utility OS - 32 bit item PMagic64 Parted Magic Utility OS - 64 bit item GParted_x64 GParted Live 64 Bit choose --default fog.local --timeout 3000 target && goto ${target} :fog.local sanboot --no-describe --drive 0x80 || goto MENU :fog.memtest kernel memdisk initrd=memtest.bin iso raw initrd memtest.bin boot || goto MENU :fog.reginput kernel bzImage32 loglevel=4 initrd=init_32.xz root=/dev/ram0 rw ramdisk_size=275000 web=http://192.168.77.146/fog/ consoleblank=0 rootfstype=ext4 storage=192.168.77.146:/images/ storageip=192.168.77.146 nvme_core.default_ps_max_latency_us=0 loglevel=4 mode=manreg imgfetch init_32.xz boot || goto MENU :fog.reg kernel bzImage32 loglevel=4 initrd=init_32.xz root=/dev/ram0 rw ramdisk_size=275000 web=http://192.168.77.146/fog/ consoleblank=0 rootfstype=ext4 storage=192.168.77.146:/images/ storageip=192.168.77.146 nvme_core.default_ps_max_latency_us=0 loglevel=4 mode=autoreg imgfetch init_32.xz boot || goto MENU :fog.deployimage login params param mac0 ${net0/mac} param arch ${arch} param username ${username} param password ${password} param qihost 1 isset ${net1/mac} && param mac1 ${net1/mac} || goto bootme isset ${net2/mac} && param mac2 ${net2/mac} || goto bootme param sysuuid ${uuid} :fog.multijoin login params param mac0 ${net0/mac} param arch ${arch} param username ${username} param password ${password} param sessionJoin 1 isset ${net1/mac} && param mac1 ${net1/mac} || goto bootme isset ${net2/mac} && param mac2 ${net2/mac} || goto bootme param sysuuid ${uuid} :fog.sysinfo kernel bzImage32 loglevel=4 initrd=init_32.xz root=/dev/ram0 rw ramdisk_size=275000 web=http://192.168.77.146/fog/ consoleblank=0 rootfstype=ext4 storage=192.168.77.146:/images/ storageip=192.168.77.146 nvme_core.default_ps_max_latency_us=0 loglevel=4 mode=sysinfo imgfetch init_32.xz boot || goto MENU :Ghost initrd http://${fog-ip}/Ghost/ghost-uni-new.iso chain memdisk iso raw || param sysuuid ${uuid} :Windows_PE_x86 kernel http://${fog-ip}/WinPE86/wimboot initrd http://${fog-ip}/WinPE86/bootmgr bootmgr initrd http://${fog-ip}/WinPE86/Boot/BCD BCD initrd http://${fog-ip}/WinPE86/Boot/boot.sdi boot.sdi initrd http://${fog-ip}/WinPE86/sources/boot.wim boot.wim boot param sysuuid ${uuid} :Windows_PE_x64 kernel http://${fog-ip}/WinPE64/wimboot initrd http://${fog-ip}/WinPE64/bootmgr bootmgr initrd http://${fog-ip}/WinPE64/Boot/BCD BCD initrd http://${fog-ip}/WinPE64/Boot/boot.sdi boot.sdi initrd http://${fog-ip}/WinPE64/sources/boot.wim boot.wim boot param sysuuid ${uuid} :PMagic kernel http://${fog-ip}/PMagic/bzImage initrd http://${fog-ip}/PMagic/initrd.img initrd http://${fog-ip}/PMagic/fu.img initrd http://${fog-ip}/PMagic/m32.img initrd http://${fog-ip}/PMagic/files.cgz boot param sysuuid ${uuid} :PMagic64 kernel http://${fog-ip}/PMagic/bzImage64 initrd http://${fog-ip}/PMagic/initrd.img initrd http://${fog-ip}/PMagic/fu.img initrd http://${fog-ip}/PMagic/m64.img initrd http://${fog-ip}/PMagic/files.cgz boot param sysuuid ${uuid} :GParted_x64 kernel http://${fog-ip}/GParted/vmlinuz vmlinuz boot=live config components union=overlay username=user noswap noeject ip= vga=788 fetch=tftp://${fog-ip}/GParted/filesystem.squashfs initrd http://${fog-ip}/GParted/initrd.img boot param sysuuid ${uuid} :bootme chain -ar http://192.168.77.146/fog/service/ipxe/boot.php##params || goto MENU autoboot -
@george1421 could it have something to do with the fact that bzImage32 and init_32.xz sound like they are 32 bit? Maybe I should create a menu entry “Register 64 bit UEFI machine” and replace those values with bzImage and init.xz?
-
@TheFunk35 said in brand new dell latitude 3500:
bzImage32 and init_32.xz
That is just an artifact of calling the url directly instead of via the iPXE menu which defines the arch.
-
@TheFunk35 said in brand new dell latitude 3500:
:fog.reg
kernel bzImage32 loglevel=4 initrd=init_32.xz root=/dev/ram0 rw ramdisk_size=275000 web=http://192.168.77.146/fog/ consoleblank=0 rootfstype=ext4 storage=192.168.77.146:/images/ storageip=192.168.77.146 nvme_core.default_ps_max_latency_us=0 loglevel=4 mode=autoreg
imgfetch init_32.xz
boot || goto MENUWell that was about what I expected its just a standard registration menu item. I also wanted to see if you had any additional kernel parameters that might be interfering with the boot, but no to that too.
-
@TheFunk35 said in brand new dell latitude 3500:
It should be noted that I had previously tried the SATA controller in RAID ON mode and tried a registration previously and those attempts proceeded to boot the registration menu
Are you sure this is the case? Can you switch RAID mode back on and it proceeds booting to registration again?!
As we are not really sure you are seeing the exact same problem here I’d ask you to open a new topic on this. Makes things more clear and we can still cross link topics. So please open a new topic and post a picture of the actual exec error on screen there. I can move the other posts over to that new topic then.
-
@Sebastian-Roth I can do that. It is kind of the same issue. In RAID mode the registration option loads but it just never finds a hard drive. It errors out with the same error OP posted here (can’t find drives). I would assume because the Intel RAID controller hides the actual drives.
