• Recent
    • Unsolved
    • Tags
    • Popular
    • Users
    • Groups
    • Search
    • Register
    • Login

    brand new dell latitude 3500

    Scheduled Pinned Locked Moved Solved
    Hardware Compatibility
    8
    31
    5.7k
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • P
      p4cm4n @Joe Gill
      last edited by

      @Joe-Gill i successfully ran through a pallet of these - 27 - and no issues. this was my process:
      boot into BIOS setup.
      Click enable UEFI network stack, scroll down to AHCI and click it. hit Apply.
      on the left, select secure boot. disable using checkbox - it will ask if you’re sure. hit yes, hit apply. hit exit.

      it reboots, hit f12, network boot ipv4
      it works

      if it doesn’t work for you, make sure your ipv4 UEFI boot settings are setup on your dhcp server (ipxe.efi instead of undionly.kpxe)

      J B 2 Replies Last reply Reply Quote 2
      • J
        Joe Gill @p4cm4n
        last edited by

        @p4cm4n

        Ding ding ding ding! I need to set my dhcp server settings for UEFI!!! Thanks!!!

        george1421G 1 Reply Last reply Reply Quote 0
        • george1421G
          george1421 Moderator @Joe Gill
          last edited by

          @Joe-Gill said in brand new dell latitude 3500:

          Ding ding ding ding! I need to set my dhcp server settings for UEFI!!!

          You may want to consider:
          https://wiki.fogproject.org/wiki/index.php/BIOS_and_UEFI_Co-Existence#Using_Windows_Server_2012_.28R1_and_later.29_DHCP_Policy

          Please help us build the FOG community with everyone involved. It's not just about coding - way more we need people to test things, update documentation and most importantly work on uniting the community of people enjoying and working on FOG!

          1 Reply Last reply Reply Quote 1
          • B
            bigjim @p4cm4n
            last edited by

            @p4cm4n I have the same problem you had. When i look in the dnsmasq log it shows the vendorclass as PXEClient:Arch:00007:UNDI:003016
            so i created dhcp-vendorclass=UEFIBC,PXEClient:Arch:00007:UNDI:003016
            iwith that in the ltsp.conf i get the Boot to FOG UEFI PXE-BC prompt but it never boots the efi
            here is my conf file.
            If anyone could help it would be appreciated.

            # Don't function as a DNS server:
port=0

# Log lots of extra information about DHCP transactions.
log-dhcp

log-queries

# Set the root directory for files available via FTP.
tftp-root=/tftpboot

# The boot filename, Server name, Server Ip Address
dhcp-boot=undionly.kpxe,,10.5.0.240

# Disable re-use of the DHCP servername and filename fields as extra
# option space. That's to avoid confusing some old or broken DHCP clients.
dhcp-no-override

# inspect the vendor class string and match the text to set the tag
dhcp-vendorclass=BIOS,PXEClient:Arch:00000
dhcp-vendorclass=UEFI32,PXEClient:Arch:00006
dhcp-vendorclass=UEFI,PXEClient:Arch:00007
dhcp-vendorclass=UEFI64,PXEClient:Arch:00009
dhcp-vendorclass=UEFIBC,PXEClient:Arch:00007:UNDI:003016



# Set the boot file name based on the matching tag from the vendor class (above)
dhcp-boot=tag:UEFI32,i386-efi/ipxe.efi,,10.5.0.240
dhcp-boot=tag:UEFI,ipxe.efi,,10.5.0.240
dhcp-boot=tag:UEFI64,ipxe.efi,,10.5.0.240
dhcp-boot=tag:UEFIBC,ipxe7156.efi,,10.5.0.240


# PXE menu.  The first part is the text displayed to the user.  The second is the timeout, in seconds.
pxe-prompt="Booting FOG Client", 3

# The known types are x86PC, PC98, IA64_EFI, Alpha, Arc_x86,
# Intel_Lean_Client, IA32_EFI, BC_EFI, Xscale_EFI and X86-64_EFI
# This option is first and will be the default if there is no input from the user.
pxe-service=X86PC, "Boot to FOG", undionly.kpxe
pxe-service=X86-64_EFI, "Boot to FOG UEFI", ipxe.efi
pxe-service=BC_EFI, "Boot to FOG UEFI PXE-BC", ipxe.efi #ipxe7156.efi

dhcp-range=10.5.0.240,proxy,255.255.0.0```
            george1421G Q 2 Replies Last reply Reply Quote 0
            • george1421G
              george1421 Moderator @bigjim
              last edited by george1421

              @bigjim said in brand new dell latitude 3500:

              When i look in the dnsmasq log it shows the vendorclass as PXEClient:Arch:00007:UNDI:003016

              Lets first try to understand your problem so we can work on a solution.

              Just for clarity PXEClient:Arch:00007:UNDI:003016 The undi part is not unique to identify the hardware, that is only the undi version 3.16 which is not a unique identifier. I’m going to say the issue is that both tags UEFI and UEFIBC will match, then when you get down to the dhcp-boot section, the UEFI will match first and then not check the remainder (guess) so only ipxe.efi will be sent to the client. Also thing to note, unless you have an old version of FOG, ipxe71567.efi should no longer be supported. I’d have to check but that boot loader should have been removed from the build.

              What isn’t working at the moment here?

              Please help us build the FOG community with everyone involved. It's not just about coding - way more we need people to test things, update documentation and most importantly work on uniting the community of people enjoying and working on FOG!

              B 1 Reply Last reply Reply Quote 0
              • B
                bigjim @george1421
                last edited by

                @george1421 Thanks for the response. Before I added PXEClient:Arch:00007:UNDI:003016 to the conf the laptop showed the
                Boot to FOG UEFI PXE-BC
                on the screen
                but iPXE would never start as if it was not finding the file.
                The screen goes away too fast to see if there are any other messages

                You are correct 7156 was removed, I pulled it from an old build to try different options.

                Thanks

                george1421G 1 Reply Last reply Reply Quote 0
                • george1421G
                  george1421 Moderator @bigjim
                  last edited by george1421

                  @bigjim If we look at the boot table map these are the different classes of systems

                             Type   Architecture Name
           ----   -----------------
             0    Intel x86PC
             1    NEC/PC98
             2    EFI Itanium
             3    DEC Alpha
             4    Arc x86
             5    Intel Lean Client
             6    EFI IA32
             7    EFI BC (EFI Byte Code)
             8    EFI Xscale
             9    EFI x86-64

                  For this device Arch:0007 should have matched, which is EFI_BC so the flag UEFI should be set.

                  So the boot file name should match dhcp-boot=tag:UEFI,ipxe.efi,,10.5.0.240

                  The following section has noting to do with the tags above because this is the boot menu, but its needed to boot correctly with some firmware.

                  pxe-prompt="Booting FOG Client", 1

# The known types are x86PC, PC98, IA64_EFI, Alpha, Arc_x86,
# Intel_Lean_Client, IA32_EFI, BC_EFI, Xscale_EFI and X86-64_EFI
# This option is first and will be the default if there is no input from the user.
pxe-service=X86PC, "Boot to FOG", undionly.kpxe
pxe-service=X86-64_EFI, "Boot to FOG UEFI", ipxe.efi
pxe-service=BC_EFI, "Boot to FOG UEFI PXE-BC", ipxe.efi

                  In this menu BC_EFI flag should match, because this is an internal variable. The pxe-prompt is set to 1 second because there is nothing for the user to select here because dnsmasq picks the correct flag.

                  Now I might suggest that you remove the comment at the end of hte BC line pxe-service=BC_EFI, "Boot to FOG UEFI PXE-BC", ipxe.efi #ipxe7156.efi

                  Now there is one more trick if you have really wacky uefi firmware. Where you append the IP address of your fog server to the end of the pxe-service line making.

                  pxe-service=X86-64_EFI, "Boot to FOG UEFI", ipxe.efi, 10.5.0.240

                  But I haven’t see this extra trick needed in quite a while.

                  All this does is send the correct boot file name to the target computer using proxyDHCP protocol (over udp port 4011)

                  Please help us build the FOG community with everyone involved. It's not just about coding - way more we need people to test things, update documentation and most importantly work on uniting the community of people enjoying and working on FOG!

                  1 Reply Last reply Reply Quote 0
                  • Q
                    Quazz Moderator @bigjim
                    last edited by

                    @bigjim Your dnsmasq config is outdated if you’re using the a newer version. (and UEFI + BIOS proxydhcp didn’t work at all on older versions)

                    dhcp-boot=tag:UEFI32,i386-efi/ipxe.efi,10.5.0.240

                    dhcp-boot=tag:UEFI,ipxe.efi,10.5.0.240

                    dhcp-boot=tag:UEFI64,ipxe.efi,10.5.0.240

                    The syntax tag: is no longer valid and needs to be replaced with net:

                    https://wiki.fogproject.org/wiki/index.php?title=ProxyDHCP_with_dnsmasq#Install_dnsmasq_on_CentOS_7 for reference

                    It’s confusing because there’s info on both older versions of dnsmasq and the newer ones, but likely this is the cause.

                    1 Reply Last reply Reply Quote 1
                    • M
                      Mountainmanmoore
                      last edited by

                      Has anyone figured this out yet?

                      J 1 Reply Last reply Reply Quote 0
                      • S
                        Sebastian Roth Moderator
                        last edited by

                        @Mountainmanmoore What exactly do you mean be “this”???

                        Web GUI issue? Please check apache error (debian/ubuntu: /var/log/apache2/error.log, centos/fedora/rhel: /var/log/httpd/error_log) and php-fpm log (/var/log/php*-fpm.log)

                        Please support FOG if you like it: https://wiki.fogproject.org/wiki/index.php/Support_FOG

                        1 Reply Last reply Reply Quote 0
                        • J
                          Joe Gill @Mountainmanmoore
                          last edited by

                          @Mountainmanmoore

                          If by this you mean booting a Dell Latitude 3500 via UEFI, I was able to get that going by setting up my DHCP server correctly as indicated in the post here.

                          1 Reply Last reply Reply Quote 0
                          • T
                            TheFunk35
                            last edited by

                            Sorry to dig up an old post but I have a lot of 30 of these laptops that need imaging.

                            I get to the Fog menu, so I know my Windows DHCP server settings are okay, but the second I go to “Perform Quick Host Registration/Inventory” the server reports that bzImage loads and then immediately I receive an error that says Chainloading failed followed by the same message as the error posted here:

                            https://forums.fogproject.org/topic/12108/could-not-select-exec-format-error-http-ipxe-org-2e008081

                            I am using the laptop’s integrated ethernet NIC. In the laptop’s BIOS, the UEFI network stack is set to enabled w/PXE. The SATA controller is set to AHCI mode. Secure boot is disabled, as is the TPM and Absolute Guard.

                            It should be noted that I had previously tried the SATA controller in RAID ON mode and tried a registration previously and those attempts proceeded to boot the registration menu but failed to find a hard drive, so I switched the controller, did a clean install because Windows didn’t like that, and tried again.

                            george1421G 1 Reply Last reply Reply Quote 0
                            • george1421G
                              george1421 Moderator @TheFunk35
                              last edited by

                              @TheFunk35 What version of FOG, and is the firmware up to date on these 3500s?

                              Please help us build the FOG community with everyone involved. It's not just about coding - way more we need people to test things, update documentation and most importantly work on uniting the community of people enjoying and working on FOG!

                              T 2 Replies Last reply Reply Quote 0
                              • T
                                TheFunk35 @george1421
                                last edited by

                                @george1421 Latest production version of Fog 1.5.8 running on CentOS 7. I don’t know about the firmware. I will try to update it tonight. I’m not hopeful that will help. It looks like my older Precision T3610 desktops are having a similar issue. They all reach the Fog menu but then trying to load anything from there is a no go.

                                george1421G 1 Reply Last reply Reply Quote 0
                                • george1421G
                                  george1421 Moderator @TheFunk35
                                  last edited by

                                  @TheFunk35 For sure the computer is in uefi mode? And you are double sure that safeboot is disabled?

                                  Just for grins what are you sending as a PXE boot file to this computer?

                                  While I seriously doubt is an ipxe menu issue if you go to a browser and call up this url, this is the program behind the iPXE menu. http://<fog_server_ip>/fog/service/ipxe/boot.php post the results here.

                                  Please help us build the FOG community with everyone involved. It's not just about coding - way more we need people to test things, update documentation and most importantly work on uniting the community of people enjoying and working on FOG!

                                  T 1 Reply Last reply Reply Quote 0
                                  • T
                                    TheFunk35 @george1421
                                    last edited by

                                    @george1421 I went ahead and updated firmware. The 3500s received a firmware update on 3/13/20.

                                    After applying the latest firmware the issue still stands. Should I try with a different ethernet adapter or is this an ipxe issue? It looks like these laptops come with realtek NICs. They seem like junky NICs. They’re the kind with the little clip built into the laptop case that are always insanely difficult to pull an RJ-45 out of. Should I try with realtek.efi instead of ipxe.efi?

                                    george1421G 1 Reply Last reply Reply Quote 0
                                    • george1421G
                                      george1421 Moderator @TheFunk35
                                      last edited by

                                      @TheFunk35 You can try the realtek.efi boot loader, but I don’t think that is the problem. What is happening is the bzImage file transferred by ipxe.efi file is not runnable on the target computer, maybe because its corrupt or something else is blocking it from running. Like always this error should not happen.

                                      Please help us build the FOG community with everyone involved. It's not just about coding - way more we need people to test things, update documentation and most importantly work on uniting the community of people enjoying and working on FOG!

                                      T 1 Reply Last reply Reply Quote 0
                                      • T
                                        TheFunk35 @george1421
                                        last edited by

                                        @george1421 Info as requested. I do have a few custom menu items but the weird thing is, everything works perfectly when booting legacy. It seems I’m having this issue only with UEFI booting devices.

                                        #!ipxe
set fog-ip 192.168.77.146
set fog-webroot fog
set boot-url http://${fog-ip}/${fog-webroot}
cpuid --ext 29 && set arch x86_64 || set arch i386
goto get_console
:console_set
colour --rgb 0x00567a 1 ||
colour --rgb 0x00567a 2 ||
colour --rgb 0x00567a 4 ||
cpair --foreground 7 --background 2 2 ||
goto MENU
:alt_console
cpair --background 0 1 ||
cpair --background 1 2 ||
goto MENU
:get_console
console --picture http://192.168.77.146/fog/service/ipxe/bg.png --left 100 --right 80 && goto console_set || goto alt_console
:MENU
menu
colour --rgb 0xff0000 0 ||
cpair --foreground 1 1 ||
cpair --foreground 0 3 ||
cpair --foreground 4 4 ||
item --gap Host is NOT registered!
item --gap -- -------------------------------------
item fog.local Boot from hard disk
item fog.memtest Run Memtest86+
item fog.reginput Perform Full Host Registration and Inventory
item fog.reg Quick Registration and Inventory
item fog.deployimage Deploy Image
item fog.multijoin Join Multicast Session
item fog.sysinfo Client System Information (Compatibility)
item Ghost Symantec Ghost Imaging Solution
item Windows_PE_x86 Install 32 bit Windows OS
item Windows_PE_x64 Install 64 bit Windows OS
item PMagic Parted Magic Utility OS - 32 bit
item PMagic64 Parted Magic Utility OS - 64 bit
item GParted_x64 GParted Live 64 Bit
choose --default fog.local --timeout 3000 target && goto ${target}
:fog.local
sanboot --no-describe --drive 0x80 || goto MENU
:fog.memtest
kernel memdisk initrd=memtest.bin iso raw
initrd memtest.bin
boot || goto MENU
:fog.reginput
kernel bzImage32 loglevel=4 initrd=init_32.xz root=/dev/ram0 rw ramdisk_size=275000 web=http://192.168.77.146/fog/ consoleblank=0 rootfstype=ext4 storage=192.168.77.146:/images/ storageip=192.168.77.146 nvme_core.default_ps_max_latency_us=0 loglevel=4 mode=manreg
imgfetch init_32.xz
boot || goto MENU
:fog.reg
kernel bzImage32 loglevel=4 initrd=init_32.xz root=/dev/ram0 rw ramdisk_size=275000 web=http://192.168.77.146/fog/ consoleblank=0 rootfstype=ext4 storage=192.168.77.146:/images/ storageip=192.168.77.146 nvme_core.default_ps_max_latency_us=0 loglevel=4 mode=autoreg
imgfetch init_32.xz
boot || goto MENU
:fog.deployimage
login
params
param mac0 ${net0/mac}
param arch ${arch}
param username ${username}
param password ${password}
param qihost 1
isset ${net1/mac} && param mac1 ${net1/mac} || goto bootme
isset ${net2/mac} && param mac2 ${net2/mac} || goto bootme
param sysuuid ${uuid}
:fog.multijoin
login
params
param mac0 ${net0/mac}
param arch ${arch}
param username ${username}
param password ${password}
param sessionJoin 1
isset ${net1/mac} && param mac1 ${net1/mac} || goto bootme
isset ${net2/mac} && param mac2 ${net2/mac} || goto bootme
param sysuuid ${uuid}
:fog.sysinfo
kernel bzImage32 loglevel=4 initrd=init_32.xz root=/dev/ram0 rw ramdisk_size=275000 web=http://192.168.77.146/fog/ consoleblank=0 rootfstype=ext4 storage=192.168.77.146:/images/ storageip=192.168.77.146 nvme_core.default_ps_max_latency_us=0 loglevel=4 mode=sysinfo
imgfetch init_32.xz
boot || goto MENU
:Ghost
initrd http://${fog-ip}/Ghost/ghost-uni-new.iso
chain memdisk iso raw ||
param sysuuid ${uuid}
:Windows_PE_x86
kernel http://${fog-ip}/WinPE86/wimboot
initrd http://${fog-ip}/WinPE86/bootmgr bootmgr
initrd http://${fog-ip}/WinPE86/Boot/BCD BCD
initrd http://${fog-ip}/WinPE86/Boot/boot.sdi boot.sdi
initrd http://${fog-ip}/WinPE86/sources/boot.wim boot.wim
boot
param sysuuid ${uuid}
:Windows_PE_x64
kernel http://${fog-ip}/WinPE64/wimboot
initrd http://${fog-ip}/WinPE64/bootmgr bootmgr
initrd http://${fog-ip}/WinPE64/Boot/BCD BCD
initrd http://${fog-ip}/WinPE64/Boot/boot.sdi boot.sdi
initrd http://${fog-ip}/WinPE64/sources/boot.wim boot.wim
boot
param sysuuid ${uuid}
:PMagic
kernel http://${fog-ip}/PMagic/bzImage
initrd http://${fog-ip}/PMagic/initrd.img
initrd http://${fog-ip}/PMagic/fu.img
initrd http://${fog-ip}/PMagic/m32.img
initrd http://${fog-ip}/PMagic/files.cgz
boot
param sysuuid ${uuid}
:PMagic64
kernel http://${fog-ip}/PMagic/bzImage64
initrd http://${fog-ip}/PMagic/initrd.img
initrd http://${fog-ip}/PMagic/fu.img
initrd http://${fog-ip}/PMagic/m64.img
initrd http://${fog-ip}/PMagic/files.cgz
boot
param sysuuid ${uuid}
:GParted_x64
kernel http://${fog-ip}/GParted/vmlinuz vmlinuz boot=live config components union=overlay username=user noswap noeject ip= vga=788 fetch=tftp://${fog-ip}/GParted/filesystem.squashfs
initrd http://${fog-ip}/GParted/initrd.img
boot
param sysuuid ${uuid}
:bootme
chain -ar http://192.168.77.146/fog/service/ipxe/boot.php##params ||
goto MENU
autoboot
                                        george1421G 1 Reply Last reply Reply Quote 0
                                        • T
                                          TheFunk35 @george1421
                                          last edited by

                                          @george1421 could it have something to do with the fact that bzImage32 and init_32.xz sound like they are 32 bit? Maybe I should create a menu entry “Register 64 bit UEFI machine” and replace those values with bzImage and init.xz?

                                          george1421G 1 Reply Last reply Reply Quote 0
                                          • george1421G
                                            george1421 Moderator @TheFunk35
                                            last edited by

                                            @TheFunk35 said in brand new dell latitude 3500:

                                            bzImage32 and init_32.xz

                                            That is just an artifact of calling the url directly instead of via the iPXE menu which defines the arch.

                                            Please help us build the FOG community with everyone involved. It's not just about coding - way more we need people to test things, update documentation and most importantly work on uniting the community of people enjoying and working on FOG!

                                            1 Reply Last reply Reply Quote 0
                                            • 1
                                            • 2
                                            • 1 / 2
                                            • First post
                                              Last post

                                            148

                                            Online

                                            12.0k

                                            Users

                                            17.3k

                                            Topics

                                            155.2k

                                            Posts
                                            Copyright © 2012-2024 FOG Project