DHCP problems on storage nodes

[Greg Plamondon]

@george1421

[george1421]

@greg-plamondon you want to change the option switches as in the command I posted. That error threw me for a second.

[Greg Plamondon]

@george1421

[george1421]

@greg-plamondon OK, that isn’t exactly what I expected. I expected a 200 code, not 302 returned (may show my ignorance). The 302 code means success but redirect which is what is happening in FOG.

I just tried this on my fog server running 1.4.4 and I got the same 302 return code. So yours is normal. That doesn’t explain why the target computer can’t access the fog server during startup.

[george1421]

@greg-plamondon Well I think we need to get better debugging information into the inits to see exactly what is going wrong.

There is a wiki page that explains how to unpack the inits. Copy the init.xz (virtual hard drive) from /var/www/html/fog/service/ipxe to /tmp on your fog server then follow the instructions in the wiki: https://wiki.fogproject.org/wiki/index.php?title=Modifying_the_Init_Image

cp /var/www/html/fog/service/ipxe/init.xz /tmp
cd /tmp
xz -d init.xz
mkdir initmountdir
mount -o loop init initmountdir

Then change into /tmp/initmountdir/etc/init.d

I’m going to work on updating S40Network to add more info so we know what its doing (wrong).

[george1421]

This is the updated S40network file.

#!/bin/bash
#
# Start the network....
#
if [[ -n $has_usb_nic ]]; then
    echo "Please unplug your device and replug it into the usb port"
    echo -n "Please press enter key to connect [Enter]"
    read -p "$*"
    echo "Sleeping for 5 seconds to allow USB to sync back with system"
    sleep 5
fi
# Enable loopback interface
echo -e "auto lo\niface lo inet loopback\n\n" > /etc/network/interfaces
/sbin/ip addr add 127.0.0.1/8 dev lo
/sbin/ip link set lo up

sleep 10

# Generated a sorted list with primary interfaces first
read p_ifaces <<< $(/sbin/ip -0 -o addr show | awk -F'[: ]+' 'tolower($0) ~ /link[/]?ether/ && tolower($0) ~ /'$mac'/ {print $2}' | tr '\n' ' ')
read o_ifaces <<< $(/sbin/ip -0 -o addr show | awk -F'[: ]+' 'tolower($0) ~ /link[/]?ether/ && tolower($0) !~ /'$mac'/ {print $2}' | tr '\n' ' ')
ifaces="$p_ifaces $o_ifaces"
for iface in $ifaces; do
    echo "Starting $iface interface and waiting for the link to come up"
    echo -e "auto $iface\niface $iface inet dhcp\n\n" >> /etc/network/interfaces
    /sbin/ip link set $iface up

    # Wait till the interface is fully up and ready (spanning tree)
    timeout=0
    linkstate=0
    until [[ $linkstate -eq 1 || $timeout -ge 35 ]]; do
        let timeout+=1
        linkstate=$(/bin/cat /sys/class/net/$iface/carrier)
        [[ $linkstate -eq 0 ]] && sleep 1 || break
    done
    [[ $linkstate -eq 0 ]] && echo "No link detected on $iface for $timeout seconds, skipping it." && continue
    for retry in $(seq 3); do
		echo "## Bringing up interface $iface ##"
		/sbin/udhcpc -i $iface --now
        ustat="$?"
		echo "## Calling the fog server ${web}/index.php ##"
        curl -Ikfso /dev/null "${web}"/index.php --connect-timeout 5
        cstat="$?"
        # If the udhcp is okay AND we can curl our web
        # we know we have link so no need to continue on.
        # NOTE: the link to web is kind of important, just
        # exiting on dhcp request is not sufficient.
		
		if [[ $ustat -eq 0 && $cstat -eq 0 ]]; then
			echo "## We have an IP address on $iface and the Master FOG server responded to our query ##"
		fi 
        [[ $ustat -eq 0 && $cstat -eq 0 ]] && exit 0

		if [[ $ustat -eq 1 ]]; then
			echo "## DHCP failed on $iface ##"
		fi
		if [[ $cstat -eq 1 ]]; then
			echo "## The Master FOG server failed responded to our query ##"
		fi
		echo "Either DHCP failed or we were unable to access ${web}/index.php for connection testing."
        sleep 1
    done
    echo "No DHCP response on interface $iface, skipping it."
done

# If we end up here something went wrong as we do exit the script as soon as we get an IP!
if [[ -z $ifaces ]]; then
    echo "No network interfaces found, your kernel is most probably missing the correct driver!"
else
    echo "Failed to get an IP via DHCP! Tried on interfaces(s): $ifaces"
fi
echo "Please check your network setup and try again!"
[[ -z $isdebug ]] && sleep 60 && reboot
echo "Press enter to continue"
read
exit 1

My comments have a double pound on both sides. Once you update the S40network file then you need to repack the inits and then move to your storage node at this test location. Understand this is only a test init so that we can find out what is going on. You will want to keep your untouched init file after the debugging is over.

---

My intuition is still telling me this could be a spanning tree issue, even though you said you checked that. Your debug FOS system has access so that doesn’t specifically have the same conditions as a physical system. I guess you could always try to image a virtual machine at the remote location and see if it works (even before tweaking the inits). In the case of a VM it will not drop the link on the physical switch because the VM is connected to a vswitch.

[Greg Plamondon]

@george1421

ok, I have the S40network modiefied and the init repacked. do I need to run the same command for testing?

[Greg Plamondon]

@george1421

I am getting an error in the S40network file.

[george1421]

@greg-plamondon Whelp, that’s why I’m not a programmer

Here is what needs to be fixed, sorry.

This is the bad line

if [ $ustat -eq 0 && $cstat -eq 0 ]; then

This is what it should have been

if [[ $ustat -eq 0 && $cstat -eq 0 ]]; then

Awe, crud and then the next errors you will find are a few lines down.

		if [ $ustat -eq 1 ]; then
			echo "## DHCP failed on $iface ##"
		fi
		if [ $cstat -eq 1 ]; then
			echo "## The Master FOG server failed responded to our query ##"
		fi

need to have the brackets too

		if [[ $ustat -eq 1 ]]; then
			echo "## DHCP failed on $iface ##"
		fi
		if [[ $cstat -eq 1 ]]; then
			echo "## The Master FOG server failed responded to our query ##"
		fi

[Greg Plamondon]

@george1421

[Greg Plamondon]

@george1421

My question is if the connection is good “## We have an IP address on eth0 and the Master FOG server responded to our query ##” Why does it then disconnect the eth0 interface and attempt to obtain an IP when it already has one that is working?

[Greg Plamondon]

@george1421

now if I issue a: /etc/init.d/S40network restart
I get this:

[george1421]

@greg-plamondon That looks perfect. If you now key in fog you can single step through deployment. Or just cancel the task on the fog server and then pxe boot this again, the vm should image. At least from a networking point everything is golden.

Is there any chance to do this on one of the broken systems?

You will see if there is an error, it will loop through this code 3 times then give up. IN this case it only when through once because it worked.

[Greg Plamondon]

@george1421

hmmm

[Greg Plamondon]

@george1421
here is a video:
Youtube FOG

[george1421]

@greg-plamondon just for clarity is this on the VM or a physical host?

[Greg Plamondon]

@george1421

this is a VM on the same host as the fogserver.
the physical PC’s do the same thing I just can’t get screen-caps of them.

[george1421]

@greg-plamondon looking at your video, it almost appears that there are 2 scripts running to start the networking. We see clearly that the S40network is executing because it has our ## messages. But the second “unknown script at this time” doesn’t print out our ## messages. That tells me there is some other code running not in S40Network that is trying to reinit the network adapter. I guess I need to do a bit more digging here.

[Greg Plamondon]

@george1421

oops, lol I copied the moved the S40network to S40network.old

[Greg Plamondon]

@george1421
ok removed the S40network.old, new video