Chainloading Failed on EXIT - Hangs on REFIND_EFI
-
OK here is what I want you to do here.
Schedule a debug capture/deploy I don’t care which to this hardware. (Hint: ensure the debug check box is selected when scheduling the task) Then pxe boot the target computer. You may have to manually register this computer if you can’t get that far. When you pxe boot this computer you will see several screens of text, which you clear by pressing the enter key. Eventually you will be dropped to a linux command prompt on the target computer.
Then key in
lsblkto show the disk structure of this ssd/hdd combination.You don’t need to use refind_efi if this is a bios (legacy) firmware. If this is a uefi system then you might need to use refind to find the proper boot blocks.
-
It’s most likely due to the multiple disks. Once you identify the OS disk (as George asked), you can specify that as the primary disk for hosts of this type. Of course it’s possible that the FOG linux kernel isn’t even seeing the SSD, though I doubt this.
-
Okay, now it’s getting weird.
When I create a capture task I get a TFTP Open Timeout error. So it’ll TFTP just fine into the menu without any task enabled but it has an issue with a task? How does that work?
-
What do you get when you key this url into a browser. Make sure you still have the capture/deploy task still scheduled.
http://<fog_server_ip>/fog/service/ipxe/boot.php?mac=<mac_of_broken_system>
That should spit out the fog iPXE configuration menu for that target computer. If its incomplete then we’ll need to tail the apache error.log file.
-
I get this:
#!ipxe set fog-ip 192.168.1.184 set fog-webroot fog set boot-url http://${fog-ip}/${fog-webroot} cpuid --ext 29 && set arch x86_64 || set arch i386 goto get_console :console_set colour --rgb 0x00567a 1 || colour --rgb 0x00567a 2 || colour --rgb 0x00567a 4 || cpair --foreground 7 --background 2 2 || goto MENU :alt_console cpair --background 0 1 || cpair --background 1 2 || goto MENU :get_console console --picture http://192.168.1.184/fog/service/ipxe/bg.png --left 100 --right 80 && goto console_set || goto alt_console :MENU menu colour --rgb 0x00567a 0 || cpair --foreground 1 1 || cpair --foreground 0 3 || cpair --foreground 4 4 || item --gap Host is registered as PSI1! item --gap -- ------------------------------------- item fog.local Boot from hard disk item fog.memtest Run Memtest86+ item fog.keyreg Update Product Key item fog.deployimage Deploy Image item fog.multijoin Join Multicast Session item fog.quickdel Quick Host Deletion item fog.sysinfo Client System Information (Compatibility) choose --default fog.local --timeout 5000 target && goto ${target} :fog.local imgfetch ${boot-url}/service/ipxe/refind.conf chain -ar ${boot-url}/service/ipxe/refind.efi || goto MENU kernel bzImage32 loglevel=4 initrd=init_32.xz root=/dev/ram0 rw ramdisk_size=127000 web=192.168.1.184/fog/ consoleblank=0 rootfstype=ext4 loglevel=4 imgfetch init_32.xz boot || goto MENU :fog.memtest kernel memdisk iso raw initrd memtest.bin boot || goto MENU kernel bzImage32 loglevel=4 initrd=init_32.xz root=/dev/ram0 rw ramdisk_size=127000 web=192.168.1.184/fog/ consoleblank=0 rootfstype=ext4 loglevel=4 imgfetch init_32.xz boot || goto MENU :fog.keyreg login params param mac0 ${net0/mac} param arch ${arch} param username ${username} param password ${password} param keyreg 1 isset ${net1/mac} && param mac1 ${net1/mac} || goto bootme isset ${net2/mac} && param mac2 ${net2/mac} || goto bootme :fog.deployimage login params param mac0 ${net0/mac} param arch ${arch} param username ${username} param password ${password} param qihost 1 isset ${net1/mac} && param mac1 ${net1/mac} || goto bootme isset ${net2/mac} && param mac2 ${net2/mac} || goto bootme :fog.multijoin login params param mac0 ${net0/mac} param arch ${arch} param username ${username} param password ${password} param sessionJoin 1 isset ${net1/mac} && param mac1 ${net1/mac} || goto bootme isset ${net2/mac} && param mac2 ${net2/mac} || goto bootme :fog.quickdel login params param mac0 ${net0/mac} param arch ${arch} param username ${username} param password ${password} param delhost 1 isset ${net1/mac} && param mac1 ${net1/mac} || goto bootme isset ${net2/mac} && param mac2 ${net2/mac} || goto bootme :fog.sysinfo kernel bzImage32 loglevel=4 initrd=init_32.xz root=/dev/ram0 rw ramdisk_size=127000 web=192.168.1.184/fog/ consoleblank=0 rootfstype=ext4 loglevel=4 mode=sysinfo imgfetch init_32.xz boot || goto MENU :bootme chain -ar http://192.168.1.184/fog/service/ipxe/boot.php##params || goto MENU autoboot -
Sorry, that was without the capture task . Here is what you actually asked for:
#!ipxe
set fog-ip 192.168.1.184
set fog-webroot fog
set boot-url http://${fog-ip}/${fog-webroot}
kernel bzImage32 loglevel=4 initrd=init_32.xz root=/dev/ram0 rw ramdisk_size=127000 web=192.168.1.184/fog/ consoleblank=0 rootfstype=ext4 mac=xx:xx:xx:xx:xx:xx ftp=192.168.1.184 storage=192.168.1.184://files/images/dev/ storageip=192.168.1.184 osid=7 irqpoll hostname=HOST chkdsk=0 img=IMG imgType=n imgPartitionType=all imgid=10 imgFormat= PIGZ_COMP=-6 hostearly=1 pct=5 ignorepg=1 isdebug=yes type=up
imgfetch init_32.xz
boot -
@88fingerslukee Interesting, this looks like a normal capture menu. This is giving you a tftp timeout error?
I’m not seeing any tftp image pulls here, only http (which it should). Can you inspect the Apache error.log file and see if there is anything useful at the end of that file (if everything is working perfectly this file should be empty).
-
Okay, so totally weird. It must’ve worked at some point because I had to leave for a while but when I came back it was at the linux prompt. Here’s the lsblk command, sda is the system SSD.
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT sdb 8:16 0 298.1G 0 disk └─sdb1 8:17 0 298.1G 0 part sda 8:0 0 238.5G 0 disk └─sda4 8:4 0 238G 0 part └─sda2 8:2 0 100M 0 part └─sda3 8:3 0 128M 0 part └─sda1 8:1 0 300M 0 partWhen I rebooted it went back to the open timeout. So I have no idea what the deal is here.
-
@88fingerslukee do you use the location plugin by chance? RC-26 fixed an issue of a method call, of which the sounds like it’s failing rc25 s bug.
-
Unfortunately, no. I don’t use any plugins at all.
-
@88fingerslukee then are there any errors that might seem relevant in the Apache error logs?
-
@Tom-Elliott no error logs at all. I only have ssl_error_log or access_log. Neither of them have anything relevant.
-
Also, another possibility, for the open timeout isn’t because of a problem with the exit type, rather how it’s being told to pass the exit based on how the system is seen. For example booting something in legacy mode would, from what I can guess, would not be able to return the UEFI based data to the system.
It suddenly thinks there’s no os to load into and restarts the system to try again. I believe you can boot down though (from EFI to legacy), just as long as the data can be found to boot up. -
@Tom-Elliott the BIOS has two different network boots, iPXE and Legacy LAN. Both of them exhibit the same behaviour
-
@88fingerslukee if your system is expecting to boot in UEFI, but your release from ipxe to system is in legacy it doesn’t matter which form of pxe on nic you’re using.
UEFI/EFI as far as I know uses the onboard ‘nvram’ to know how to boot the system but in legacy mode that element would not be accessible.
Please help us build the FOG community with everyone involved. It's not just about coding - way more we need people to test things, update documentation and most importantly work on uniting the community of people enjoying and working on FOG! Get in contact with me (chat bubble in the top right corner) if you want to join in.
Web GUI issue? Please check apache error (debian/ubuntu: /var/log/apache2/error.log, centos/fedora/rhel: /var/log/httpd/error_log) and php-fpm log (/var/log/php*-fpm.log)
Please support FOG if you like it: https://wiki.fogproject.org/wiki/index.php/Support_FOG
-
@Tom-Elliott I’m not certain I understand what you’re saying here. Are you suggesting an issue with the motherboard’s implementation of iPXE or something to do with FOG?
-
@Tom-Elliott This depends on the motherboard / BIOS.
I have several models of Lenovo set to UEFI, but allow booting to both. I can drop a Legacy/CSM or UEFI image onto these systems and they will boot either OS fine.
In fact I just Legacy PXE booted an M73z with undionly.kpxe to transfer an OEM UEFI image. It transferred and booted fine and runs as a UEFI OS.
-
@88fingerslukee In the bios/uefi firmware settings, what is the boot order?
i.e and or also…
Is UEFI enabled and Legacy enabled, or just UEFI?
What pxe boot file are you using? I’ve seen that make a difference. I haves some cheaper HP’s that won’t boot with sanboot to the hard drive if you use ipxe.kkpxe, but they work fine with ipxe.pxe or ipxe.kpxe.Also have you played with the refind boot settings? There’s a file on the fog server at
/var/www/fog/service/ipxe/refind.conf
there is a line that starts withscanforI’ve changed mine to only look forinternal,externalwhich means it only looks for uefi options and not legacy options. On a few of my devices, if I have it set as uefi only it has a pause on the host every boot if UEFI CSM isn’t set and it searches for the bios options that are enabled in fog by default.
