Surface Pro 4 Image Capture

[Psycholiquid]

ok tried teh powercfg -f off and turning off the quick boot options. Made sure the hibernation file was gone also. No dice, gonna try and upload it before hitting OOBE and see what happens.

[Tom Elliott]

@Psycholiquid Upload before hitting OOBE?

[Psycholiquid]

@Tom-Elliott yeah I am wondering if it has something to do with audit mode. I have seen it do this before. Not completely sure why.

[Tom Elliott]

@Psycholiquid I don’t know what you mean by “upload before hitting OOBE?”

You’re sysprepping the system, letting it boot a little bit first, THEN uploading the image?

[Psycholiquid]

@Tom-Elliott Nope, I have it in audit mode, then I run my script (Unattend.xml) and once it goes down and comes back to the “BIOS” I push it into network boot to capture the image

This way when a computer comes up form being imaged it thinks it is the first time it boot. Like all the major OEMs do it

[Tom Elliott]

@Psycholiquid That’s where I was lost. That’s how you’re supposed to do it.

[Psycholiquid]

Yeah, but for some reason it is making the partition dirty, cant figure out why though. It did this to me before and I was finally able to get past it after a few reboots and disk checks, but this time it isnt working. Gonna work at it some and report back

[george1421]

@Psycholiquid as far as this thread is concerned, is the issue of not able to capture the image solved? I know what you are capturing is not working but at this time you can capture.

[Psycholiquid]

@george1421 Yeah I would say it is technically working, the issue I am having with with the PC not the capture process.

[Wayne Workman]

@Tom-Elliott said in Surface Pro 4 Image Capture:

@Psycholiquid Did you disable hibernate in the image?

Open CMD:

Run: powercfg -h off

The command should be run in an elevated command prompt, and is powercfg.exe /H off so please try that, reboot twice, and then try to upload.

[Psycholiquid]

@Wayne-Workman Yeah I always run CMD as elevated. It didnt help. It is the EFI boot partition that is giving the error. I am trying a clean install this morning without sysprep to see if it will upload. Then I will work up from there to see where the disconnect is happening. This is kinda weird on partclone’s part. I can see why they check but like George said in another post there should be a way to ignore it since windows 10 will have this alot.

[Psycholiquid]

Just an update, reinstalled fresh copy of Windows 10 for Surface and it uploads jsut fine it has something to do with the audit mode, as soon as I put it in audit mode it marks that partition as dirty. As to why I am not sure but that is what is happening.

[george1421]

@Psycholiquid Just as a question, why are you not using something like MDT to build your reference image in a VM, capture and then deploy to your surface systems? This way you don’t have to manage audit mode at all and sysprep will work as it should.

[Psycholiquid]

The surface image is a bit different than the normal PC image with the pen and the recovery partition and such., If I just use the LTSB it will not have all the bells and whistles people want from owning a Surface.

[george1421]

@Psycholiquid Understand that I don’t know the Surface Pro, but it was my understanding that you could use MDT to build your reference image with all of the Surface toys built in. https://blogs.technet.microsoft.com/askcore/2014/07/15/deploy-windows-to-surface-pro-3-using-microsoft-deployment-toolkit/ (Yes I know this says surface 3, it was the first one I hit on in my google-fu search)