FOG 0.33 - What's coming?
-
[quote=“MikeyMike, post: 1275, member: 493”]I dont see any issues with Windows 7 64 bit. I have been using it since Jan 2010 with Fog .30 and now .32. I work with over 300 Windows 7 64 bit computers and I have never used sysprep. I dont have any issues with kms either I just make sure my image doesnt join the domain until after deployment.[/quote]
Without windows updates, i have no problem too.However with the SP1 and more of w7, i can’t create a new image (i received “****” at state “check disk”…
-
[quote=“mikemaster, post: 1276, member: 483”]Without windows updates, i have no problem too.However with the SP1 and more of w7, i can’t create a new image (i received “****” at state “check disk”…[/quote]
I apply SP1 as an offline installer (you also get an extra count to 4 re-arms total if you do this) and I also apply all windows updates to the image before uploading and its always worked with various Dell, HP and Acer laptops and desktops on my school network. I run checkdisk, ccleaner also and then defrag about 4 times before an upload image. I still run fogprep and dont have fog client installed and havent seen the issue you have mentioned at all. Hope that helps!
-
[quote=“MikeyMike, post: 1288, member: 493”]I apply SP1 as an offline installer (you also get an extra count to 4 re-arms total if you do this) and I also apply all windows updates to the image before uploading and its always worked with various Dell, HP and Acer laptops and desktops on my school network. I run checkdisk, ccleaner also and then defrag about 4 times before an upload image. I still run fogprep and dont have fog client installed and havent seen the issue you have mentioned at all. Hope that helps![/quote]
I don’t get that error with SP1? My SOE has SP1 and I haven’t had any probems with .32
-
[quote=“MikeyMike, post: 1288, member: 493”]I apply SP1 as an offline installer (you also get an extra count to 4 re-arms total if you do this) and I also apply all windows updates to the image before uploading and its always worked with various Dell, HP and Acer laptops and desktops on my school network. I run checkdisk, ccleaner also and then defrag about 4 times before an upload image. I still run fogprep and dont have fog client installed and havent seen the issue you have mentioned at all. Hope that helps![/quote]
[quote=“andyroo54, post: 1292, member: 267”]I don’t get that error with SP1? My SOE has SP1 and I haven’t had any probems with .32[/quote]
Ok thx guys! I will retry next week and if that doesn’t work , i will create a new post in another subject.
-
Thank you guys i have imaged about 4000 computers with fog and it works!
There are more reasons to run fog than any other Imaging software i know about, so thank you guys, Fog is awesome! -
Is location going to be an intergrated for distributed storage nodes, like the location patch, and distributed network in FOG .33?
-
Any update on when we might see .33 RC1?
-
ETA of 0.33 ? I really need ext4 support. keep up the good work!
-
[quote=“MikeyMike, post: 1275, member: 493”]I dont see any issues with Windows 7 64 bit. I have been using it since Jan 2010 with Fog .30 and now .32. I work with over 300 Windows 7 64 bit computers and I have never used sysprep. I dont have any issues with kms either I just make sure my image doesnt join the domain until after deployment.[/quote]
So I have to ask, if you’ve never used sysprep, how do you image the computers with a standard image (software/updates etc) without the image having the same name for everything?
-
Please where is a 0.33 version because I have Ext4 partition in my network ?
Thank
-
pluneau, have you tried upgrading the kernel on FOG to 3.2.4?
-
And where 3.2.4 ?
-
-
3.2.4 can be downloaded from here, [url]http://sourceforge.net/projects/freeghost/files/Kernels/Kernel-3.2.4.core/Kernel-3.2.4.core/download[/url]
-
Then you need to backup bzImage in /tftpboot/fog/kernel. so I renamed mine bzImage.backup (If this doesn’t work, either log into the computer under the FOG account, or chmod the folder)
-
When you copy the 3.2.4 kernel to this location rename it to bzImage (note that the case is important) and you should be all set.
-
-
OK Thank
-
what’s news in this version ?
-
the 3.2.4 kernel should support the EXT4 filesystem. All the other changes for version .33 of FOG are listed in the first post of this thread.
-
[quote=“Blackout, post: 49, member: 1”]We are aiming for a FOG 0.33 RC1 release at the end of January 2012
[B]What’s coming?[/B]
[LIST]
[]Rewritten PHP code base to be fully Objected Oriented - easier to develop & maintain
[]Developer Tools - create your own FOG Page’s to suit your needs
[]Hook System - manipulate data & structure easily
[]Web UI update - tabs, style updates, lots of code updates & bug fixes
[]Mobile UI update - revamped structure & styles
[]Partclone - EXT4 & Extended Partition support
[*]Advanced Format Drive support - 4k sector support
[/LIST]
[COLOR=#808080][SIZE=2][I]Disclaimer[/I][I]: This list may change[/I][/SIZE][/COLOR][/quote]Those features sound good but i would like to know (it may help others also) is a explanation of these new features like it was done on the[URL=‘http://www.fogproject.org/wiki/index.php?title=Main_Page’] fog wiki’s change log page [/URL]
-
[quote=“Kevin, post: 1665, member: 3”]the 3.2.4 kernel should support the EXT4 filesystem. All the other changes for version .33 of FOG are listed in the first post of this thread.[/quote]
Upgraded to 3.2.4 kernel and can in fact image my linux box with ext4 now, though because it is multiple partitions, it takes a long time to do it.Looking fwd to .33 to work/play with!
-
Any updates to the release of 0.33? After evaluating 0.32 at my company and getting extremely favorable results, I’m waiting to take what I’ve learned from 0.32 and apply to 0.33 and invest in a major multisite system imagin rollout.
Will the “patch” for multisite storage nodes across WAN links be included with 0.33. That is a “MUST HAVE” feature. A colleague and I have worked the existing software to allow TFTP/PXE in multiple sites and leverage Windows DFS to replicate the images.
Keep up the outstanding work.
-
I have just changed jobs. In my old job I deployed 300 desktops using FOG. My new job has 600 desktops and the company uses Symantec Alitiris. Can I have FOG back please? FOG just needs a way to deploy individual packages via the fog service and it will be complete