Can't have partition outside the disk
-
Which sounds like the image is too big for the disk, or there is something wrong with the image.
-
If it is the 2 default partitions for windows 7 (one is very small ~100 mb and the other is the rest of the disk) you can still use the NTFS Resizable option on it (fog takes into account that it is for windows 7 and allows this). Again IF you can ghost this back to the original machine and pull it again with the resizable option, I’m betting it will fix your issue.
-
after doing some more research my windows 7 images is Multiple Partition - Single Disk non resizable. I created the image from a pc that had a drive size of 232.88 gig and i was trying to deploy to a pc that had a drive size of 232.82, since it’s not resizable the target drive needs to be the same or larger capacity. What i should have did was build the windows 7 image on the smallest drive i have…
-
[quote=“rixter, post: 415, member: 168”]If it is the 2 default partitions for windows 7 (one is very small ~100 mb and the other is the rest of the disk) you can still use the NTFS Resizable option on it (fog takes into account that it is for windows 7 and allows this). Again IF you can ghost this back to the original machine and pull it again with the resizable option, I’m betting it will fix your issue.[/quote]
The only option that is resizable is the Single Partition option which doesnt work because there are 2 partitions, i tried that before and it blue screened on me
-
If it is the 2 partitions from Windows 7 (boot and C), it will still resize - its only when it gets beyond the base partitioning scheme of Win 7 (you used 3 partitions?) that resize will fail.
-
[quote=“totalimpact, post: 536, member: 217”]If it is the 2 partitions from Windows 7 (boot and C), it will still resize - its only when it gets beyond the base partitioning scheme of Win 7 (you used 3 partitions?) that resize will fail.[/quote]
It is those 2 default partitions but In the instructions i read it was suggested to use “Multiple Partition Image - Single Disk” for the image type when creating windows 7 images which doesn’t resize. Are you saying that it will ?
-
Yes - it will, not sure what instructions show that, but its mentioned all over the forum - use Single Disk/Single Partition for best performance - even on Win 7.
-
I am having a similiar issue with an XP multi-partition. The image was taken from a 160GB HDD, and I am getting the error trying to image to a 1TB HDD. Do I need to put a partition table on the drive first? It is a blank new drive with nothing on it.
-
Have you tried imaging the source drive as Single Drive / Single Partition?
FOG will create or delete partitions as it sees fit, you should not need to do any partitioning - but in multi partition scenarios, it will not resize the partitions on your new drive, only in single partition mode can it resize.
-
It is a multi partition drive that i am imaging from. I am not concerned with resizing it. We just had 1TB drives on the shelves. One of our computer labs, a drive died, so I was replacing it and using an image taken from another machine. I just cannot figure out who it says it is outside the disk when this drive is 7 times the size of the original host image drive.
-
I havent tried the scenario yet - but I know multi-partition to the same drive size works fine - hopefully development can chime in.
If its just a single failed system, Clonezilla would definitely work. In the future you might try changing your platform to single partition - it has saved me a ton of time and space.
-
[quote=“totalimpact, post: 539, member: 217”]Yes - it will, not sure what instructions show that, but its mentioned all over the forum - use Single Disk/Single Partition for best performance - even on Win 7.[/quote]
Fog says that in the image types in the description and that’s why i used it.
[B]Multiple Partition - Single Disk[/B]Multiple Partition - Single Disk will back up all the supported partitions on the first disk drive detected by FOG, but the partitions are [B]NOT[/B] resizable by FOG. This means that the image must be restored to a disk of the same or larger capacity.
[B]Overview[/B][LIST]
[]Single Disk Drive
[]Not Resizable
[]Supports: [B]NTFS, XFS. JFS, HPFS, FAT16, FAT32, Reiser3, EXT2, EXT3[/B]
[]Linux Support!
[/LIST]I don’t see how you can use Single Disk/Single Partition when there are 2 partitions?
-
The single disk/single partition does work for windows 7 as long as you don’t have a recovery partition in the mix also. I just uploaded a Win7 image this morning with the 100mb partition and the regular partition and have been deploying the image successfully.
I agree, it does seem logical to pick the Multiple Part/Single disk, but Single/Single accounts for the 100mb partition and has worked for me.
Try uploading it, worst case is that it won’t upload, but barring some other problem, it should.
-
The developers know that Windows 7 will always have a 100mb boot partition (many people dont even see it), and then some partition of random size, so this means there is only 1 partition FOG needs to manipulate, but if you add a 3rd partition in to the mix - how will Fog make the decision as to which needs resizing?? - this is why multi partitions cant be resized - and Win7 has 2 parts, but only 1 needing resizing - this is why Win 7 works as a “resizable single partition” scenario - the term doesnt fit, but it works.
-
h
[quote=“totalimpact, post: 563, member: 217”]The developers know that Windows 7 will always have a 100mb boot partition (many people dont even see it), and then some partition of random size, so this means there is only 1 partition FOG needs to manipulate, but if you add a 3rd partition in to the mix - how will Fog make the decision as to which needs resizing?? - this is why multi partitions cant be resized - and Win7 has 2 parts, but only 1 needing resizing - this is why Win 7 works as a “resizable single partition” scenario - the term doesnt fit, but it works.[/quote]hmmm…i may have tried that before not sure but it may have blue screened on me. i have one freshly done next to me ill give your suggestions a shot hopefully i dont lose all my effort i put into it to get it how i want it, let you guys know the outcomes. If it does work then someone needs to correct those image types descriptions:)
-
[quote=“The Dealman, post: 560, member: 53”]I don’t see how you can use Single Disk/Single Partition when there are 2 partitions?[/quote]
There is special code to deal with Winblows 7 partition structure. It will work with Single Disk, Single Partition (Re-sizable) as intended.
[quote=“totalimpact, post: 563, member: 217”]The developers know that Windows 7 will always have a 100mb boot partition[/quote]Not always. I remove it on my images personally.In the future, we are looking at offering a Mutli-Partition (Re-sizable) option that will resize the last partition to the remainder of the disk.
-
I changed the setting to the Single Drive / Single Partition option uploaded my image and i saw as it was going through the pre-checks it resized the partitions. i havent deployed it to a different model yet or checked to see what the partitions look like yet though but it may have worked…
-
Hi,
So I have a 30GB Virtual machine, windows 7 NTFS, If I Want to deploy this to every machine, and have
expand to use the additional space on the comptuers drives, which option should I select? It should be single disk (resizable) right? -
I believe so. I’ve not done any work using FOG and VMs, but I’d think a virtual Win7 image with a single partition (excluding the aforementioned system partition) ought to image in the same fashion. Maybe somebody’s who’s done this with VMs can reply and verify or offer tips.
As far as using the resizable single disk Win7 image for conventional machines, it works great! I’ve been deploying a roughly 20GB image to all sorts of different drive sizes and it’s done very well.
-
I am developing my Windows 7 image and am having a couple of problems. I posted in a separate post but this sounds like similar issues and seems to be an active post.
-
When I try to capture a Windows 7 Enterprise image with 1 partition it immediately fails when starting the partimage (blue screen).
-
I have successfully captured an image with 2 partitions (Includes the 100mb part) but when I try to deploy it I get a BOOTMGR is missing error.
As it is I cannot seem to either create or deploy a Windows 7 image in FOG. I have tried this on various hardware as well as in a virtual machine all with the same result. Others have commented in my post to having the same issue. Any ideas??
-
