Could Not Start Download: Operation Not Supported
-
Restarted service as indicated in the link, attempted another download - no dice. Same error as before.
-
Np. This step specifically will let you know if your tftp, firewall, and rights are correct. If this fails then it could be one of these causing your issue.
[SIZE=4][B][FONT=sans-serif][COLOR=#000000]0.33 and 1.x.x[/COLOR][/FONT][/B][/SIZE][LIST]
[]From your FOG server test out tftp
[/LIST]
[COLOR=#000000][FONT=monospace]tftp -v X.X.X.X -c get undionly.kpxe
[/FONT][/COLOR]
[LIST]
[]From a Windows PC run at the cmd prompt: ([URL=‘http://fogproject.org/wiki/index.php/Windows_TFTP’][COLOR=#0b0080]Windows TFTP[/COLOR][/URL] Service must be Installed first)
[/LIST]
[COLOR=#000000][FONT=monospace] tftp x.x.x.x get undionly.kpxe[/FONT][/COLOR] -
Apologies. I did both, worked as indicated. File transferred and whatnot, so it does not appear to be an issue with either the file being missing or the TFTP server not being active.
-
Bump…
Still need some help resolving this. To this point, nothing has changed, though I have no clue what I could change to possibly fix the issue.
Thanks.
-
Do you see the FOG MENU?
Verify your DHCP options.
Verify your network switch settings are correct. If STP is enabled you will need to read this wiki. [url]http://fogproject.org/wiki/index.php/IPXE[/url]. If you recently changed a switch this could easily cause an issue. When in doubt pull the fog server out of your network and create a small private network for testing. Try using an un-managed switch.
I’m just throwing this out there but could you update to trunk. May issues have been corrected since June. If you have a trunk version please verify that you have at least r2836.
Video would be nice.
-
To answer your questions in order…
- No fog menu. It appears that PXE is failing before it can load the FOG menu.
- DHCP options are set as they should be:
[QUOTE]Option 66 - Boot Server Host Name: 172.20.4.252
Option 67 - Bootfile Name: undionly.kpxe[/QUOTE] - We do not run STP on our network.
- I will try to set up a private network for the Fog server and a client but it will take some time due to the DHCP settings that won’t be passed when configuring the private network.
- I am not entirely certain what you are speaking of in regards to the trunk, more specifically the version
Will post a video in a bit.
-
[media=youtube]he6x8hHzA78[/media]
-
[quote=“TonyB.2871, post: 40274, member: 26980”]To answer your questions in order…
I am not entirely certain what you are speaking of in regards to the trunk, more specifically the version
[/quote]
[url]http://www.fogproject.org/wiki/index.php/Upgrade_to_trunk[/url] -
Could you explain why this is necessary? What bearing does it have on the PXE issues I am having?
-
[quote=“TonyB.2871, post: 40279, member: 26980”]Could you explain why this is necessary? What bearing does it have on the PXE issues I am having?[/quote]
Hi,
SVN versions are “stable”, in my case correct lot of problems since 1.2.
Regards,
Ch3i. -
Just curious as we were able to image fine on 1.2.0 for quite some time up until recently. I know there was a minor network infrastructure change, but nothing that should have affected the Fog server’s functionality. Given I can access it via HTTP, TFTP, etc… and that it worked before, Im slightly confused why we need to upgrade.
-
[quote=“TonyB.2871, post: 40293, member: 26980”]Just curious as we were able to image fine on 1.2.0 for quite some time up until recently. I know there was a minor network infrastructure change, but nothing that should have affected the Fog server’s functionality. Given I can access it via HTTP, TFTP, etc… and that it worked before, Im slightly confused why we need to upgrade.[/quote]
Hi,
No new hardware ? : switchs, computers, …
Your server is virtual ?Regards,
Ch3i.
