Network fails on compatibility test
-
[quote=“Jordon Rapp, post: 28927, member: 24302”]It appears to be an Intel 82567LM-3 and it’s running on a Dell Optiplex 780, which I see is on the list of trouble machines on the wiki[/quote]
Which kernel are you using? You will most likely need to use one of Tom’s All inclusive kernels that includes the drivers for your system and run the compatibility check again.
-
[quote=“Jaymes Driver, post: 28991, member: 3582”]Which kernel are you using?[/quote]
I am using the most up-to-date official kernel from the FOG Management page.
-
I did download the kernel from Tom’s website, but the use of the make command escapes me.
-
if you downloaded the kernel from my site, you shouldn’t need to use make. it’s already built.
-
I ran your kernel, and I still get a fail on network
-
Nothing? I’m at a loss with this whole thing
-
What is the chipset motherboard is based on
-
Chipset Vendor: Intel
Chipset Model: Q45/Q43
Chipset Revision: 03 -
Can you give my latest kernel build a shot?
[url]https://mastacontrola.com/fogboot/kernel/bzImage[/url]
[url]https://mastacontrola.com/fogboot/kernel/bzImage32[/url] -
I’m having trouble with the network cards as well in the Dells
So far I’ve tested the Dell OptiPlex 755 and receiving errors on the console reporting over and over.
DHCP/BOOTP: Ignoring fragmented reply
DHCP/BOOTP: Reply not for us
DHCP/BOOTP: Ignoring fragmented reply
IP-Config: Reopening network devices…about about 3 or 4 minutes it loads but shows the network adapter as not available and lists it as failed.
I have tested with the latest kernel on the kernel updates as well as the ones from your website.
Both have the same issues.The Dell 755 is listed as a Q35 Express chip and the network adapter is listed as Intel 82566DM-2 in windows.
I haven’t had a chance to check any other Dell Desktop yet.
Cheers,
-
[quote=“Tom Elliott, post: 29283, member: 7271”]Can you give my latest kernel build a shot?
[url]https://mastacontrola.com/fogboot/kernel/bzImage[/url]
[url]https://mastacontrola.com/fogboot/kernel/bzImage32[/url][/quote]This did not resolve the issue.
-
Can you provide a screen shot?
I can assure you, my kernels have the e1000e drivers. As a matter of fact, the one I had you try last night has nearly anything related to Intel enabled.
-
[quote=“Tom Elliott, post: 29331, member: 7271”]Can you provide a screen shot?[/quote]
[url]http://imgur.com/3pPIfpG,9dZI68T,0SB6nVd,b9c9ZHn,pqe4p2p,hlGcwxu#0[/url]
Edit for context: The first image hangs like that for a couple minutes, the the second picture hangs for a bit as well. Then it skips all the FOG info and says it can’t be registered and gives my system info. The it just attempts to inventory until I put it out of it’s misery.
-
[quote=“Jordon Rapp, post: 29338, member: 24302”][url]http://imgur.com/3pPIfpG,9dZI68T,0SB6nVd,b9c9ZHn,pqe4p2p,hlGcwxu#0[/url][/quote]
Okay:
What steps did you use to update the kernel?
By it “sitting like this for a few minutes” is it not doing anything or does it go further, or you’re not patient enough for it?
-
I downloaded the kernel, drug it to my desktop, then in terminal:
[CODE]sudo mv ~/Desktop/bzImage32 /var/www/fog/service/ipxe[/CODE]I do wait for it, the rest of that album shows what happens
-
I know it’s rare, but could the NIC be bad?
-
hmmmmmm
You’re running 1.0.1 right?
I’ll bet the file that’s loading is bzImage, not bzImage32.
[code]sudo mv /var/www/fog/service/ipxe/bzImage /var/www/fog/service/ipxe/bzImage_05JUN2014
sudo mv /var/www/fog/service/ipxe/bzImage32 /var/www/fog/service/ipxe/bzImage32_05JUN2014
sudo wget -O /var/www/fog/service/ipxe/bzImage --no-check-certificate https://mastacontrola.com/fogboot/kernel/bzImage
sudo wget -O /var/www/fog/service/ipxe/bzImage32 --no-check-certificate https://mastacontrola.com/fogboot/kernel/bzImage32[/code] -
I am, 1.0.1 on Ubuntu 13 on a Dell Optiplex 755. I will run those commands real quick
-
Right after I select Perform Full Host Registration, it [I]does [/I]say
[QUOTE]/bzImage… ok[/QUOTE]
So this could be the problem -
[quote=“Jordon Rapp, post: 29349, member: 24302”]Right after I select Perform Full Host Registration, it [I]does [/I]say
So this could be the problem[/quote]
Why would that be a problem?
