FOG: 1.5.4 -> How to setup NAS - Synology DiskStation as Master Node
-
Are you sure capture will work when you mount the NAS nfs to the fog server? Typically you cannot share and nfs share in read and right. What I mean by this: if the folder is read only you can share it without much issue regardless of how many times it’s shared, but for read write, it must be mounted exactly once. At least anything I’ve ever seen.
-
@tom-elliott Yes it will work, look at the capture that I made directly on the NAS without going through the storage of the FOG server:
while capturing the image is stocked on /volume1/images/dev folder:
and when he is captured 100%, it will appear on the folder /volume1/images directly:
I’m capturing one right now:
-
@tom-elliott That sounds a bit weird to me? Surely a server should allow multiple rw clients simultaneously? (even for the same share)
-
@quazz what I mean is a shared share being shared.
For example, if you have a share at 192.168.10.1 mounted to server 192.168.10.5, sharing rw from 192.168.10.5 would fail as the locks have already been dedicated to 192.168.10.5. If all mounts are to the central point you would be fine.
-
@tom-elliott Fair enough, but he doesn’t appear to be exporting the mounted share.
I don’t know why exactly he’s mounting it on his FOG server, it doesn’t seem important to making this process work.
-
@tom-elliott Quite right, but then we can put the 3 folders in one and the same shared folder. For the tutorial I did like that but we could also make a central shared folder for example name “FOG” with the 3 folders in, “images”, “snapins” and “tftpboot” except that the path would be /volume1/FOG/images, /volume1/FOG/snapins…
-
Hello
I followed your tutorial and thank you for doing this.
I have my storage which is well added but when I want to capture I have access denied …
mount 10.1.5.8:/volume1/images on / images permission denied
If I try to connect to the share on the nas with my FOG user it works.
Can you help me ?
Thank you
-
@jeremyvdv said in FOG: 1.5.4 -> How to setup NAS - Synology DiskStation as Master Node:
mount 10.1.5.8:/volume1/images on / images permission denied
Where are you seeing this message?
If I try to connect to the share on the nas with my FOG user it works.
From what device does it work? FOG server?
The target computer connects to the NFS share using the credentials of
root
if the nfs share hassquash root
parameter. root will not be able to connect to the nfs share, yet a normal user can mount it. If you pxe boot the target computer in debug mode (tick the debug checkbox before scheduling the task) you can run the commands interactively on the target computer for testing. -
if I start in debug mode. what action do I have to do manually?
Thank you
-
@jeremyvdv said in FOG: 1.5.4 -> How to setup NAS - Synology DiskStation as Master Node:
if I start in debug mode. what action do I have to do manually?
At the FOS Linux command prompt you would key in
mount -o nolock,proto=tcp,rsize=32768,intr,noatime "$storage" /images
where$storage would be the nas server IP address and the file path. For example
10.1.5.8:/volume1/imageswould go there. Don't forget the colon after the IP address and before the path. Also make sure that
10.1.5.8` is the IP address of your NAS. If that mounts correctly then the problem is elsewhere. -
Hello
I corrected: my problem by indicating the network of my clients rather than the server on the NFS configuration of synology.now i’m experiencing this problem at capture:
-
for information, I have this message at the end of my capture … it happens to create the files on my NAS … but on the end I have this message
-
If I have to change the password in fogftp.class.php
Thank you for telling me which line exactly because I can not find -
@jeremyvdv said in FOG: 1.5.4 -> How to setup NAS - Synology DiskStation as Master Node:
If I have to change the password in fogftp.class.php
You do not edit the code in this case. On your NAS you need to setup the FTP service so that the FOS Linux engine can connect to it. You will need to create a user ID and password on your NAS device. Then on the FOG serve web gui, for the storage definition of the NAS, under the management user and password.
You should test using the ftp client on a windows computer to ensure you can connect to the nas using the managment user ID and PASSWORD and navigate to the /volume1/images2 path and to create and delete a directory in that path. If you can then you have the permissions set correctly on the images2 directory.
I do have a tutorial that I created for the synology nas too: https://forums.fogproject.org/topic/9430/synology-nas-as-fog-storage-node
-
Hello
and thank you for your help.
I advanced on the subject by chnging the login in fogsetting.php
but now I have the message: maximum number of tries exceeded ftp.On the nas I have no restriction.
-
here is where I am.
Not easy to set up this storage -
@jeremyvdv Probably the account is locked for too many login attempts using the wrong credentials? Can you manually connect to that via a FTP client like FileZilla (host: 10.1.5.8 …)?
-
yes i tried and since winscp i have no problem
-
I see on the error that it uses the root account.
out of synology i can not create a root account.
that may be the problem.
But what if that’s it?Thank you
-
@jeremyvdv Well then change to a different username: FOG web UI -> Storage -> edit the Storage node settings, scroll down to the bottom and edit username and password.